The Essential Resource for the Medical Design Engineering Community
Coaxial Resonator Oscillator Maximizes Performance and Efficiency
December 5, 2008 7:04 am | Crystek Corporation | Product Releases | CommentsThe CVCO55CXT-6250-6250 coaxial resonator oscillator (CRO) employs frequency doubling, 2X fundamental technology to reach new performance levels of lower phase noise, and much lower harmonics over the competition, while achieving lower current consumption in the process.
Enhanced Software Eases FDA Compliance
December 5, 2008 7:04 am | Cimtek | Product Releases | CommentsAn upgrade to the Magellon Quality Lifecycle Management (QLM) software gives medical device-makers a streamlined way to rapidly deliver quality products and maintain compliance with the FDA's Title 21 CFR Part 11.
Pneumatic Cylinder Calibrated for Precise 0 to 10 Volt DC Output
December 5, 2008 7:04 am | Bimba Manufacturing Company | Product Releases | CommentsUnlike traditional pneumatic feedback technology, these non-contact pneumatic position feedback cylinders are resistant to the effects of moisture, oil, airborne debris, and dust. In addition, each cylinder is factory calibrated for precise 0 to 10 volt DC output.
Label Printer/Applicator Tailored to Customer Requirements
December 5, 2008 7:04 am | Industrial Labeling Systems Corp. | Product Releases | CommentsThe Ultimate PAH Automated Print & Apply System features a rugged all-steel chassis and a modular design that can be configured to match customer requirements. Providing a typical placement tolerance of 0.
HMIS Department Designs and Provides Customer Specific Interface Systems
December 5, 2008 7:04 am | Eao Corporation | Product Releases | CommentsThe company's HMIS (human machine interface systems) department provides end users with the designs and manufacturing capabilities of interface systems within the guidelines of customer specific requirements.
Illuminated Tactile Switch Has Independent LED Leads
December 5, 2008 7:04 am | E-Switch | Product Releases | CommentsThe TL1240 is an illuminated tact switch with multiple LED color options. This illuminated tact switch has through-hole termination and independent LED leads. Its reliable dome technology is perfect for medical devices.
Ringlight System Available for Custom and Universal Fit
December 5, 2008 7:04 am | Dolan-Jenner Industries | Product Releases | CommentsIdeal for laboratory use, the Fiber-Lite MI-150 ringlight system features 360° of shadow-free, high-intensity illumination and provides the greatest range of working distance.
Medical Device Adhesive Formulated With See-Cure Technology
December 5, 2008 7:04 am | Product Releases | CommentsThe medical device adhesive 1201-M-SC is a flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics typically used in the manufacture of medical devices, such as reservoirs, tube sets, and catheters. The recommended substrates include PC, PET, PS, PU, PVC, and ABS.
26 and 28 AWG Conductors Allow Smaller, More Flexible Cable
December 5, 2008 7:04 am | Alpha Wire | Product Releases | CommentsThe Xtra-Guard family of performance cables has been expanded with 26 AWG and 28 AWG stranded conductors.
USP Class VI Approved Medical Adhesive Has Quick Set Time
December 5, 2008 7:04 am | Master Bond, Inc. | Product Releases | CommentsThis low viscosity medical epoxy—EP41SMED—has a handling time of as little as 10-15 minutes and forms resistant bonds to cold sterilants such as EtO and gamma radiation as well as water, oil, and many organic solvents.
Angular Bearings Used to Support Heavy Thrust/Radial Loads
December 5, 2008 7:04 am | Misumi Usa, Inc | Product Releases | CommentsA line of angular bearings with housings is used to support heavy thrust loads in combinations with radial loads in the same application.
Proportional Pressure Control Valve Designed for Roughest Environments
December 5, 2008 7:04 am | Proportionair | Product Releases | CommentsThe QPV ultra high resolution, closed loop, electronic proportional pressure control valves are made for the toughest environments. The QPV maintains its impressive resolution of +/-0.005% F.S. in any orientation without the need for recalibration.
Photoelectric Proximity Switches Have a Long Sensing Distance
December 5, 2008 7:04 am | Contrinex, Inc. | Product Releases | CommentsThese photoelectric proximity switches are designed to provide users with a high level of performance at competitive prices. The 5050 series is built in the widely used 50 x 50 mm format and is available in diffuse, retro-reflective (reflex), and through-beam versions.
M12 Socket Connectors Provided With Profibus Cable
December 5, 2008 7:04 am | Binder Usa | Product Releases | CommentsThe M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.
Plug-In Enables Direct Scan to Software Functionality
December 5, 2008 7:04 am | Laser Design & Gks Global Services | Product Releases | CommentsThe Rapidform liveScan plug-in is available for the company's line of Faro portable 3D laser scanners.
