The Essential Resource for the Medical Design Engineering Community
Circular Connectors
March 9, 2006 12:10 pm | Omnetics Connector Corp. | Product Releases | CommentsDesigned to save space and weight while increasing interconnect reliability with Mil Spec material, these microminiature circular connectors are used in medical applications. They are ready for overmolding and insertion into handheld probes and instruments.
Laser System
March 9, 2006 12:10 pm | Coherent Semiconductor Group | Product Releases | CommentsThe Avia 532-30 delivers over 30 watts of green (532 nm) output. This q-switched, diodepumped laser is designed to meet the needs of high-throughput materials processing as well as demanding scientific applications.
Fan Filters
March 9, 2006 12:10 pm | Universal Air Filter Co. | Product Releases | CommentsMeet thermal management and air filtration requirements for blowers and fans—axial flow, cross flow, intelligent fan packs, pancake styles—with low-profile, low-air resistance filters.
Power Entry Module (2901)
March 9, 2006 12:10 pm | Schurter, Inc. | Product Releases | CommentsThe DF series circuit breaker and AC inlet combination offers a recessed switch to prevent accidental actuation. The combination saves space and is pre-wired for quick installation. The DF12 offers both standard and medical type filters.
ITC/PLTC Cable
March 9, 2006 12:10 pm | Northwire Inc. | Product Releases | CommentsCustom-configured ITC/PLTC cable is offered for use in industrial control and instrumentation circuit applications. Three of the six product platforms being introduced are exposed-run rated.
Machined Springs
March 9, 2006 12:10 pm | Helical Products Co. | Product Releases | CommentsThese compression/extension “machined” springs incorporate multiple features into a single component. The opportunity to incorporate attachments that best benefit the application is one of the major benefits of a machined spring, (i.e., the ends of a compression spring can be flat and square).
Measuring Unit
March 9, 2006 12:10 pm | Mitutoyo America Corporation | Product Releases | CommentsWith an industry leading ultra-low measuring force of 0.01 N (1 gf), Litematic high resolution precision digital contact instruments are ideally suited for high precision measurement of fragile, easily deformable workpieces. The instruments offer an extremely high resolution of 0.01/0.1/1.
PWM Amplifier
March 9, 2006 12:10 pm | Cirrus Logic Inc. | Product Releases | CommentsA 5 A, 60 V monolithic pulse width modulation (PWM) amplifier IC has been developed. The SA56 delivers increased power to drive a wider range of DC and stepper motors of up to 1/3 HP, while the use of PWM technology provides efficient power delivery to minimize thermal issues.
Gas Metering Valve (2891)
March 9, 2006 12:10 pm | South Bend Controls, Inc. | Product Releases | CommentsThe gas metering valve is a direct-acting proportional Servoid valve. The Servoid valve driver provides linear proportional control of the metering orifice which yields linear proportional flow.
Heat Sinks
March 9, 2006 12:10 pm | Advanced Thermal Solutions | Product Releases | CommentsMaxiFlow heat sinks are designed for cooling BGAs and other hot components in the restricted air flow conditions typical of today’s condensed electronic packages. The heat sinks feature a low profile, spread fin array that maximizes surface area for more effective convection (air) cooling.
Workholding System
March 9, 2006 12:10 pm | Sensors Unlimited, Inc. | Product Releases | CommentsThe VB DockLock zero-point workholding system is designed to facilitate workholding setup changes in seconds. It integrates with workholding devices such as vises, providing a fast, accurate, and repeatable method for making setup changes on all types of horizontal and vertical machining centers.
Threaded Standoffs
March 9, 2006 12:10 pm | Pennengineering | Product Releases | CommentsPatented PEM “Type DSOS” self-clinching threaded standoffs can be installed close to edges in thin metal sheets and offer a reliable method to stack or space components in an assembly. They can serve ideally where space for fastening hardware may be limited and are RoHS compliant.
Oscillator
March 9, 2006 12:10 pm | Product Releases | CommentsThe RV-8564-C2 real time clock module combines a 32.768 Hz timing crystal with a CMOS oscillator circuit in an ultra-small SON 10-pin ceramic package. The unit measures just 5.0 x 3.2 x 1.2 mm.
Conveyors (2883)
March 9, 2006 12:10 pm | Dorner Mfg. Corp. | Product Releases | CommentsESP (Engineer Specials Program) is a program that gives extra attention to building conveyors with unique dimensions and characteristics above and beyond the dimensions of the company’s regular conveyor platforms.
Chair Configurator
March 8, 2006 10:20 am | News | Product Releases | CommentsBioFit Engineered Products introduces the seating industry's first online Build Your Own Chair configurator for designing ergonomic chairs to meet customer specifications for hospitals and other healthcare applications.
