Levelprox, a non-invasive ultrasonic sensor that provides point level detection of liquids through metal containers, now has FM approval.
Top Technologies Medical devices involve multiple technologies, from metallurgy to microprocessors.
Fluoroplastic tipped tubes are available to be used as IV or needle introducers. These tubes are designed with a tapered and/or beveled end to assist in the insertion of IVs and facilitate the transfer or extraction of fluids and can be laser marked for identification purposes.
The Arcam EBM S400 is a rapid manufacturing and prototyping system that makes 100% solid metal parts. The highly efficient system produces metal parts three to five times faster than other additive fabrication methods.
The RoHS compliant 1K2 is a high quality changeover slide switch recommended for PCB configuration applications. The switch occupies a board space measuring only 10 x 2.5 mm with a height of 4.5 mm excluding actuator. It is available with 2.
ProcessMate 5000 centrifuge is a fast, simple, and cost-effective way to purge medium- to high-viscosity fluids like epoxies, greases, and silicones of bubbles and air pockets that can affect shot-to-shot consistency in pneumatic dispensing processes.
Available in 12 twin-wheel models, the TwinTech Combi total lock swivel caster range is designed for medical equipment, hospital beds and stretchers, and for other applications requiring dependable performance combined with design style.
The FB Series line of precision linear stages uses ceramic servo motors. The series is available in a wide range of sizes, with slides as narrow as 50 mm and up to 150 mm wide. All stages are based on crossed roller bearings and are provided with a non-contact linear encoder.
The STAC6-Q stepper drives feature Q programming—a comprehensive programming language with options for downloading, storing, and executing multiple programs with a single drive. They provide current output from 0.5 to 6.
The HTK Series of single-output, low-voltage, switch-mode power supplies offer a wide choice of case type, output connectivity, and front panel coupled with a choice of 11 output voltages between 3.3 and 54 V. The HTK300 units offer a maximum output power of 198 W for the 3.
Refined for optimal performance at the lowest price, the Series 5120 filtered power entry module is particularly suited for single-phase power supplies used in Medical Devices, which are governed by stringent EMC emission and immunity standards.
The Swiss 10 A power cords and cordsets are for equipment rated up to 10 A with service at 250 VAC. They are approved to the SEV, Electrosuisse SEV 1011:98, CH-Type 12, Standard-Sheet SEV 6534-2. The power cords and cordsets are available from stock with 1.00 mm 2 HAR cable in 2.5 m length.
This signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.
The Legex 574 CNC coordinate measuring machine combines state-of-the-art design, electronics, computing, sensors, and materials to offer substantially enhanced performance while at the same time providing a significant price advantage.
The Excelsior EX is designed for applications ranging from engraving steel and stainless steel to machining small parts from plastics, aluminum, and brass where tight tolerance and accuracy are of paramount importance. Specifically, EX stands for extra low-pitch precision ball screws.