The model SB7F forged, high purity ball valve features self-aligning interlocking ends and an exclusive “fine adjust” handle to ensure exact alignment of the entire flow path. The A-182 forged material has a controlled delta ferrite content of less than one percent and as low as <0.5%.
Easy-2-Combine is the solution for multi-axis automation tasks with individual components that can be combined in simple, time-saving assembly steps. This means that the most common applications in assembly technology can now be done with standardized interfaces.
Series 204 Horizontal Laminar Flow Clean Benches include an internal motorized filter unit for full filter coverage, and three-side access for easy cleaning. They come in several sizes ranging from two-by-two feet to two-by-six feet.
The Type 127 Miniature Rocker Solenoid Valve is ideal for use in equipment that must operate reliably and cost effectively in demanding environments. It leads the company’s 16-mm rocker valve line. This line offers pressure ranges from vacuum to 145 psi; orifice sizes from 0.8 mm to 2.
Custom molded rubber parts bonded to metal components for prototype and production applications is a service available from this company. Typical metal and plastic components bonded to rubber include handles and grips, valve assemblies, diaphragms, gear and sprocket assemblies, and mounting devices.
This IJ/384 printhead utilizes the third generation print engine from Trident. This printhead features a 2 in. imaging height at 192 vertical dpi for smooth true-type fonts and logos, as well as UPC/EAN and SCC-14 bar codes at 200 horizontal dpi.
The MLW series of lighted, snap-in, rugged, illuminated rocker devices feature a stainless steel
Model 7700 is a 3-in-1 tester that features 5 KV AC Hipot at 100 mA (500VA), 6 KV DC Hipot at 10 mA, and insulation resistance testing. The Model 7704 is a 4-in-1 tester that features 5 KV AC Hipot at 100 mA (500VA), 6 KV DC Hipot at 10 mA, insulation resistance, and 30 Amp Ground Bond testing.
The IX-3000 system is a Class 1 UV Excimer-based laser step and scan ablation system for micro-machining, drilling, and laser processing of a wide range of materials.
The microprocessor-driven, digital-timer DX-300 series, dispenses precise fluid profiles in an accurate, consistent, and repeatable manner. The series is comprised of the DX-300 and the DX-315.
The EZ-mix®FR2 Disposable Cartridge Meter-Mix-Dispense System features a positive displacement drive mechanism and a fully integrated controller for precisely dispensing from standard disposable cartridges with 0.1 ml accuracy.
The PS41 series of pressure switches incorporates two design principles to achieve excellent performance characteristics. The switches utilize an internal piston to allow high proof pressure, while gaining sensitivity and accuracy from a diaphragm media interface.
The Signum RESM optical angle encoders make an ideal fit for direct drive rotary (DDR) motors, eliminating position error and backlash while delivering speeds to over 3,600 rev/min, accuracy to ۪.5 arc second, plus resolution and repeatability to 0.02 arc second.
Each of the three Loctite Meter Mix Dispense Systems feature fixed and variable ratio units that can be customized with accessories to meet specific end user requirements. For precise ratio dispensing, the Loctite 1000 System features two positive displacement piston pumps.
The Instrumentation, Systems and Automation Society has released another book in its The Consumer Guide to . . . series—a set of books that provide detailed and unbiased guides to the most commonly used instruments throughout the world.