Suitable for cleanroom environments, the CGL15N/CGL20N Actuator has a clean, corrosion resistant, and longterm maintenance-free design. For low particle generation, it features a seal mechanism and a full size cover. AFE-CA grease (designed for cleanrooms) is also used to reduce dust.
The Motomate brushless motor features compact size, convenience, and easy programmability. Designed with an integral controller, the motor provides an all-in-one solution for a wide range of applications where programmable movement of simple mechanisms is required.
The Mini Series lead screw assemblies are for demanding miniature applications, such as miniature pumps and dispensing systems, micro-actuators, and laser/optical focusing mechanisms.
The Makrolon Rx2435 polycarbonate resin is a medical grade that addresses the increasing demand for a radiation sterilizable material for thin-wall medical applications. Like Makrolon Rx2530 polycarbonate, the Rx2435 exhibits a balance of mechanical strength and toughness.
The closed-loop Ecodry System is an alternative to cooling towers/chillers. Suitable for any climate, the cleanroom ready system decreases water and energy usage by up to 95% and increases productivity by up to 20%.
Trilliant HC blends are well-suited for hand-held medical-device applications, such as diagnostic tools, blood-glucose meters, pulse oximeters, and battery-powered feeding pumps, in which close contact with the skin and cleaning with chemicals is common.
Brush and brushless DC vibration motors are aimed at a wide range of applications. These 10 mm OD coin shaped devices include the brushless DC vibration motor, the LBV10L at 3.4 mm thick, LBV10B at 3.0 mm thick, and the slimmer LBV10C at 2.35 mm thick. Excitation voltage is a universal 3.0 VDC.
The ultrasonic welding machine HiQ evolution focuses on energy efficiency, user-friendliness, the upcoming New Machinery Directive, and ergonomics.
Medical device and medical supply manufacturers with applications requiring high speed leak testing of parts (from several cubic centimeters to several liter volumes) can now integrate leak testing into test-intensive assembly operations using the M-1075-Y mass flow leak detectors.
A broad line of detect switches for ATCA (advanced telecom computing architecture) and AMC (advanced mezzanine card) use in portable medical equipment is available.
Nimbus antimicrobial technology has been applied to adhesives for the purpose of combating infection. It is a next generation antimicrobial technology that is non-leaching, non-toxic, long-lasting, and not blocked by organics, such as blood, urine, or perspiration.
Advanced technology for producing thin walled, large diameter, low durometer urethane extrusions is available. Commonly used in minimally invasive medical devices, such extrusions have been fraught with manufacturability challenges.
This line of MK23 Non-Molded SMD Reed Switches is developed specifically for SMD mounting. These low-cost "naked" reed switches are for a range of applications that includes medical equipment.
The D6F-10/20/50 series mass gas flow sensor features 10, 20, and 50 LPM models in a compact body [78 (L) × 30 (W) × 30 (H) mm] with multiple port size options available.
This in-line load cell with a USB output option, the LCM300, is a tension and compression built for endurance, press, or inline applications.