A unique preloading scheme avoids changing wear characteristics, allowing orders of magnitude increase in stage life without any degradation in stage performance, and allows stage operation over a wide temperature range.
RS linear drives are now available with five linear pitch settings and adjustable axial thrust. This permits varying pitch/thrust combinations until optimum settings are achieved.
Medical device molding with design and mold-making support are capabilities provided by Sil-Pro Silicone Professionals, an ISO contract manufacturer specializing in LEAN silicone molding and silicone extruding for the medical industry.
Using a fully-equipped Class 7 (10,000) cleanroom, the company converts materials such as electrical grade papers, films, coated cloths, laminates, and tapes for the most demanding medical applications.
This snap action switch, the TS2 series, is a subminiature switch featuring surface mount termination. Its small package size is designed for higher reliability applications and, because of its unique SMT design, will be popular on many board-level applications.
The 5 x 3.2 mm M Series TCXO/VCTCXO is designed for use in instrumentation as well as other applications requiring tight frequency stability in a small package. The use of analog temperature compensation allows for a holding sub 0.28 ppm holdover over multiple temperature ranges.
These miniature plastic components are die-cut using die-less digital equipment to produce parts with +/- 0.005 in. precision and narrow cross sections (1:1 ratio to part thickness) which can be supplied plain or with adhesive backings.
The PMT320 model offers a repeatability of +/- 1 micron, excellent straightness, run-out accuracy, and travel distances from 600 to 1,500 mm. The stage has a 320 mm wide die cast base profile and the 1,000 mm stroke stage weighs 70 kg.
This line of standard ST-12C counterbalanced hinges provides consistent, high-torque performance in a compact package, enabling equipment operators to lift and position hinged components with less effort.
The GE-25 Series contains general purpose, low cost, highly reliable 25W power supplies. Units have an 88-264 VAC (125-373 VDC) input range, and the single output voltages of 3.3 to 48 VDC have a +/-10% adjustment range. Efficiency averages 81% and GE-25’s no-load power consumption of <0.
The miniature Tracker position sensor has improved 0.5 µm resolution and additional packaging options. It is suitable for a wide range of applications including precision biomedical devices and optical instrumentation.
The C5100 Series is available in three standard DC input voltage ranges from 320-800 VDC. Single outputs are available in six standard ranges from 23-200 VDC. All outputs are adjustable and fully regulated to 0.2% or better (load) and 0.1% (line).
The Kydex FST sheet is available in a lower gloss finish, integrally colored metallic, with a texture called PB-Brushed Metal, or as an injection-molding resin.
The VMC 4020 FX combines a 1219 x 508 mm table with a maximum table load of 1,651 kg, 15,000 RPM air/oil spindle, and the Infimatic Freedom NC200 control featuring a special performance package.
This wrist strap and ground monitor provides effective workstation monitoring in applications with two metal ground requirements. The 773 monitor grounds and monitors two operators and two metal grounds.