The ultra-small (10 × 7.2 cm) pITX-SP SBC, based on the Intel Atom Z5xx processor and Intel System Controller Hub US15W, offers maximum connectivity on an extremely compact, standardized footprint.
A 16-channel version of the SerDes Test Modules for VPX systems is available. The modules allow testing and pre-emphasis of the SerDes signals to ensure signal performance of the system. The 16-channel SerDes modules are designed to plug into VPX backplanes and directly test the channel compliance.
The DVMB-764 is a high performance digital video motherboard built on an Intel Q965 Core2 Duo/Quad Core platform and a 16-channel MPEG4 hardware encoding engine.
Ensuring that the quality and accuracy of a finished product meets its CAD design is of paramount importance for the medical device manufacturing industry. However, how to facilitate that is not nearly as clear.
Designed to provide the most scalable thermal packaging option on the market, the Credo Cube was conceived in response to industry demand for greater flexibility in transport packaging.
A bench top system was constructed for a pressure sensor manufacture that both dispenses an adhesive then carefully places a single sensing chip inside an individual housing with the help of machine vision.
This line of resistance temperature detectors (RTDs) uses thin film technology that provides excellent sensing at a lower cost than wire wound elements. The RTDs are available with both nickel and platinum elements, and set the highest standard in temperature measurement devices.
Special Issue: Solutions in Medical Manufacturing; Inside: Read about employing appropriate inspection technologies in “Inspecting Metrology Options,” from Hexagon Metrology. Shared are professionals’ opinions on reimbursement. Additionally, read about the power of the heartbeat, connectors, interconnects, boards and modules, electromechanical and mechanical devices, creating software, optimizing the processing of TPUs, and safety critical coding...
Designed with a silicone rubber actuator and snap-fit mounting, each switch in the KC and KD Series of round, water-resistant rocker switches complies with IP56 standards and is suitable for applications requiring resistance to dust and water intrusion, such as medical equipment.
The HA Series of linear guides integrates a variety of the company’s proprietary technologies to provide high motion accuracy, rigidity, and load capacity. The use of ultra-long ball slides achieves high motion accuracy in both narrow and wide ranges.
Designed to efficiently and quietly power today’s portable medical devices, the PMP90 Series of medical desktop power supplies provides 90 Watts of power in a compact 3 x 5.12 x 1.72 in. package and is compliant with Level IV CEC, EISA2007, and Energy Star requirements.
The Microgage 2D transparent receiver is designed for aligning production machinery and equipment. A narrow laser beam provides a measuring reference line that allows the transparent receiver to determine the position of a machine or subassembly relative to the laser beam.
AGC motorized mechanical goniometers are used in applications where 90° of angular travel is needed with the payload at the center of rotation, or where two axes of rotation are needed about a common point.
This cost-efficient, stand-alone motion controller provides multi-axis control for simple and demanding applications. Designated SPiiPlus-LF, the small form factor, four axes motion controller features off-board extensions to provide up to 64 axes of control using a CANopen network.
The Solo Guitar is an integrated solution designed to simply and efficiently connect the company’s Guitar Servo Drive directly to a motion application.