Advertisement
The Essential Resource for the Medical Design Engineering Community
Subscribe to MDT Magazine All

Recyclable TPEs Are FDA-Compliant

October 5, 2009 6:19 am | Product Releases | Comments

gls37800001416Recyclable TPEs are FDA-compliantNPR The Versaflex HC portfolio, engineered for medical tubing, gaskets, stoppers, sheet extrusion, and blow molding applications, has been developed and tested for compliance with USP Class VI, ISO 10993-4, and ISO 10993-5.

Self-Aligning Spherical Bearings Prove Versatile

October 5, 2009 6:19 am | Product Releases | Comments

igubal spherical bearings are self-aligning components—rod ends, clevis joints, flange bearings, pivot bearings, and pillow blocks—made entirely of high-performance plastics. They are self-lubricating and easy to install.

Right Angle Gearbox Delivered in 48 Hours or Less

October 5, 2009 6:19 am | Groschopp, Inc. | Product Releases | Comments

This line of IEC Right Angle (RA) Gearboxes with hollow out-put allow options for right, left, or dual shaft configurations. All nine sizes are in stock and ready to ship in 48 hours or less. The nine sizes range from 26 to 130 mm. Input Power is 0.06 to 7.5 kW, 1/15 to 10 hp.

Advertisement

Gasket Design for EMI Shielded Honeycomb Vents Improves Performance/Delivery

October 5, 2009 6:19 am | Product Releases | Comments

This continuous integrated gasket for shielding honeycomb vents offers better performance, reduced cost, and the fastest production time. Continuous lengths of the high-performance BeCu gaskets are mechanically installed under the inner perimeter of the vent's aluminum extrusion frame.

Stainless Steel Surgical Components Are Custom Manufactured

October 5, 2009 6:19 am | Disposable Instrument Co., Inc. | Product Releases | Comments

Company provides custom-manufactured stainless steel surgical components, including wound-drainage and Laparoscopic trocars, K-wires and Steinmann pins, guide pins, tunnelers, introducers, and custom devices. Surgical grade materials are used in compliance with ASTM F899 and ISO 7153-1.

Eco-Friendly Alternative to Traditional Latex

October 5, 2009 6:19 am | by William Doyle | Articles | Comments

Latex is a preferred material for thousands of products. However, prolonged exposure has revealed concerns with allergies that cause reactions ranging from mild itching to troubled breathing.

TOPICS:

Pin Fin Heat Sinks: A Sharper Way to Keep Medical Electronics Cool

October 5, 2009 6:19 am | by Barry Dagan | Articles | Comments

Keeping electronics cool is critical to ensuring their long life and reliability. Utilizing heat sinks can help achieve this, but determining the proper type and configuration can be a challenge. This article reviews pin fin heat sinks, material options, sparse vs.

Shining a New Light on Surgical Procedures

October 5, 2009 6:19 am | by Paul Scheidt and Dave Medinis | Articles | Comments

Maintaining a well-lit field of view during surgical procedures has traditionally been accomplished with Xenon bulb technology. However, this solution brings with it a number of concerns that impacts both the surgical team and the patient.

TOPICS:
Advertisement

Green Power-Supply Designs Reference Guide

October 5, 2009 6:19 am | Product Releases | Comments

Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, offers the Digital Interleaved Power Factor Correction (PFC) Reference Design, which demonstrates how to realize the benefits of fully digital PFC for green power-supply designs.

Systems Integrator Program Offers Solutions for Automation Projects

October 5, 2009 6:19 am | Product Releases | Comments

Omron Electronics LLC has launched OASIS (Omron Authorized Systems Integrator Solution), a new

Medical Portfolio Desk Reference for Converters and OEMs

October 5, 2009 6:19 am | Product Releases | Comments

Converters of medical materials and manufacturers of medical device components can now turn to an artfully designed desk reference from the Avery Dennison Specialty Tape division for medical tape selection assistance.

Brochure Features 5-Axis CNC Micro Milling Machine

October 5, 2009 6:19 am | Product Releases | Comments

This brochure features Microlution's 5100-S, 5-axis CNC micro milling machine–a vertical bridge style machining center and trunnion style 4th and 5th axis with built-in pallet workholding.

Weld Frame Kits/Connectors Offer Faster Storage Speeds

October 5, 2009 6:19 am | Itt Interconnect Solutions | Product Releases | Comments

In addition to the two-piece, ultrasonic, weld frame kits, which meet both Type 1 and Type II CFast specifications, the company has also developed 24-pin CFast surface mount connectors that can be easily customized to meet unique offsets specified by designers.

High-Density Connectors Increase I/O Points

October 5, 2009 6:19 am | Phoenix Contact | Product Releases | Comments

High-density M12 connectors provide more I/O points than traditional M12 sensor/actuator connectors. The circular connectors come in 12- and 17-pole versions. This high pin count allows M12 device connections in applications where space must be conserved, such as medical equipment.

High Density Connectors Offer Multiple Contacts in Single Connector Package

October 5, 2009 6:19 am | Positronic Industries, Inc. | Product Releases | Comments

Combination D-Subminiature connectors are a popular choice for a wide variety of applications, as they offer signal, power, coax, and high voltage contacts mixed within a single connector package.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading