SmarTRACK is an intelligent connector system with integrated firmware designed to help prevent misuse of devices. It controls information embedded into a connector, such as product identification, serial number tracking, storage/retrieval of calibration data, and counting or usage timers.
Designed for all small handheld devices, the miniature Transguard 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss. Its multilayer varistors are ideal for embedded components, such as hearing aids.
SMD HCMOS TCXOs and VCTCXOs are available in a miniature 3.2 × 2.5 mm package size. The 3.3-volt FOX923CH and FOX923CEH Series oscillators eliminate the need for supplementary external circuitry to obtain a HCMOS output.
The Voltage Controlled Oscillator CRBV55FL-0136-0174 Red Box VCO operates from 136 to 174 MHz with a control voltage range of 0.5~4.5 V. It features a typical phase noise of -123 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +9 dBm.
PLT series of precision low-TCR thin film resistors feature a low standard TCR of ±5 ppm/°C and tolerances down to ±0.02% over a wide temperature range of -55°C to 125°C.
Two quasi-CW UV lasers deliver the highest power currently available for products of this type.
Dow Corning Corporation has added two new product lines to its Active Protection System family of impact protection materials. The S-Range is based on 3D spacer textile technology while the TP-Range is based on thermoplastic technology.
Clean Air Products introduces Series 901 modular cleanroom walls. They are available in three standard designs, with custom sizes and shapes to suit various application needs.
Hirose Electric Co., Ltd. offers an extensive line of flexible circuit connectors. Designated the FH Family, the connectors come in many different configurations with contact pitches ranging from 1 to 0.
Eurotherm has adopted EtherNet/IP as the communications protocol for its 6000 series Paperless Graphic Recorders, allowing its recorders to communicate with a huge installed base of EtherNet/IP enabled PLCs and other I/O and control devices in many industrial applications.
Aerotech NanoTranslation (ANT95-XY, ANT95-XY-H) cross-roller-bearing, linear motor, dual-axis stages are the newest in the evolution of ANT series stages. The ANT95-XY and ANT95-XY-H are three-piece designs that allow travel in two dimensions (X and Y).
The improved V4 microswitches offer a reduced differential movement of 0.05mm and below to better accommodate industrial applications such as electromagnetic brakes or pressure switches that require very small differential movements to operate correctly.
The EKB-97-TP is a backlit keyboard that is lit by blue LED lighting. The keyboard is ideal for working in dimly lit areas such as labs and patient rooms.
The QuasarBrite narrow beam SMT LED provides users with a tight beam of high-intensity red, green or blue light.
As hospital rooms become more high tech, an important concern for today's medical device designer is electromagnetic interference (EMI). Much attention has already been given to the infamous cell phone case which highlights interference from radio frequency signals.