Advertisement
The Essential Resource for the Medical Design Engineering Community
Subscribe to MDT Magazine All

OEM Servo Motor Controller Features CAN Option

June 11, 2008 11:50 am | Quicksilver Controls, Inc. | Product Releases | Comments

QuickSilver has added a CAN option to its smallest (2 inches/52 mm &#215 2.5 inches/63mm), most cost effective servo motor controller.

Silicon Arrays Protect Against Electrostatic Discharge

June 10, 2008 1:03 pm | Littelfuse, Inc. | Product Releases | Comments

Silicon protection arrays provide both unidirectional overvoltage protection (SP1001-xx) for multiple channels as well as bidirectional signal protection (SP1002-01) for one channel. Their low input capacitance aids in EST protection, and their small size (0.09 inches sq.

IP67 Rated Circular Connectors Lock in Place

June 10, 2008 1:03 pm | Omron Electronic Components, LLC | Product Releases | Comments

The Smartclick connector line has expanded, as the XS5M panel-mount plug and XS5P panel-mount socket have been made available. These IP67 rated circular connectors are compatible with screw-on M12 connectors and XS5 Connectors and strengthen circuit connection by locking into place.

Advertisement

Linear Drive Provides 800 lbs. Thrust

June 10, 2008 1:03 pm | Amacoil, Inc. | Product Releases | Comments

The RG80 linear drive facilitates heavy load linear motion applications and gets rid of the need for electronic controls. The drive also allows for manual adjustments without gear reduction or adjustment of the drive motor speed.

Perspectives on First Step in Design (Part VI)

May 22, 2008 11:59 am | Texas Instruments Inc. | Articles | Comments

The idea has been thought up, the "napkin sketch" has been made, and the project is ready to move forward. So what's the first "real" step in the design process? This was the question for the participants in this month's Perspectives feature.

TOPICS:

Perspectives on First Step in Design (Part V)

May 22, 2008 11:49 am | Pilgrim Software, Inc. | Articles | Comments

The idea has been thought up, the "napkin sketch" has been made, and the project is ready to move forward. So what's the first "real" step in the design process? This was the question for the participants in this month's Perspectives feature.

TOPICS:

Perspectives on First Step in Design (Part IV)

May 22, 2008 11:40 am | Protek Power | Articles | Comments

The idea has been thought up, the "napkin sketch" has been made, and the project is ready to move forward. So what's the first "real" step in the design process? This was the question for the participants in this month's Perspectives feature.

TOPICS:

Perspectives on First Step in Design (Part III)

May 22, 2008 11:28 am | Dukane Corporation | Articles | Comments

The idea has been thought up, the "napkin sketch" has been made, and the project is ready to move forward. So what's the first "real" step in the design process? This was the question for the participants in this month's Perspectives feature.

TOPICS:
Advertisement

Perspectives on First Step in Design (Part II)

May 22, 2008 11:12 am | Analog Devices, Inc. | Articles | Comments

The idea has been thought up, the “napkin sketch” has been made, and the project is ready to move forward. So what’s the first “real” step in the design process? This was the question for the participants in this month’s Perspectives feature.

TOPICS:

Perspectives

May 9, 2008 6:32 am | Articles | Comments

Perspectives

TOPICS:

Fiber Laser Marks Wide Range of Materials

May 8, 2008 8:43 am | Schmidt Marking Systems | Product Releases | Comments

The YLIA fiber series is a new generation of powerful marking lasers. With their combined high peak power and high quality beams, the fiber laser allows for a wider range of materials to be marked such as plastics, polymers, metals, and ceramics.

Timing Pulleys Offered in Wide Variety of Materials, Sizes

May 8, 2008 8:43 am | Misumi Usa, Inc | Product Releases | Comments

This family of timing pulleys is offered in a wide variety of materials and sizes, including high-torque versions. The unique feature of this line is the configurable hub offered to suit virtually any shaft hole and flange requirement.

Inlet Filter Series Provides up to 6 dB More Attenuation

May 8, 2008 8:43 am | Schaffner Emc, Inc. | Product Releases | Comments

The FN9233E features an earth line choke with approximately 6 dB more attenuation compared to the FN9222 family, making the series ideal for applications requiring greater attenuation performance or additional attenuation on the ground wire.

Strain Gage Load Cells Offer High Performance at Low Cost

May 8, 2008 8:43 am | Rdp Electrosense | Product Releases | Comments

Offering linearities of 0.03% with overall accuracies of 0.1%, these load cells are designed to meet the demands of today's competitive marketplace.

Dispensing Syringe Has Revolving Curved Tip

May 8, 2008 8:43 am | Qosina | Product Releases | Comments

This dispensing syringe with a revolving curved tip is ideal for dispensing viscous materials into tight spaces requiring precise application. The one inch curved syringe tip is fitted onto the syringe body with a 360° rotation for maximum flexibility and directional adjustment.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading