Advertisement
The Essential Resource for the Medical Design Engineering Community
Subscribe to MDT Magazine All

Strain Relief Bushings Fit Larger Size Round Cables

March 11, 2008 10:05 am | Product Releases | Comments

The RDD-601 strain relief bushing increases the capabilities of the RDD line to include round cables up to 0.7 inches and panel mounting holes up to 1.109 inches w/1.0 inches flats.

Open Frame Chassis for Test/Debugging

March 11, 2008 10:05 am | Elma Electronic | Product Releases | Comments

An open frame chassis is offered for test/debugging. The unit does not have side or back walls around the card cage area, leaving it open for easy access. The E-frame was designed with the high (and flexible) power and cooling requirements for VPX (VITA 46/48) systems.

Rotary Blade Wire Stripper

March 11, 2008 10:05 am | Product Releases | Comments

The Model C100S rotary blade wire stripper is a single blade centrifugal rotary stripper (and twister) that can process insulations from solid and stranded wires. Strip length and blade depth adjustments are made while the machine is running.

Advertisement

Plastic Reel Addresses Storage Concerns

March 11, 2008 10:05 am | Tolomatic, Inc. | Product Releases | Comments

Company has developed an exclusive assembly and disassembly method to address customer concerns over shipping and storing empty reels. The cord lock design assembles in seconds and requires no glue, fixtures, or tools.

Portable UV Curing System for 3D Surfaces

March 11, 2008 10:05 am | UV III Systems, Inc. | Product Releases | Comments

The Multicure UV curing system features a hand-held quartz lamp which produces a narrow band 365 nm output (other spectrums available) for curing three-dimensional surfaces coated with UV-curable coatings or adhesives.

Black Chrome Plating on Motion Components

March 11, 2008 10:05 am | Misumi Usa, Inc | Product Releases | Comments

Low-temp, black chrome plating is available for a variety of the company’s motion components, including linear shafts, linear bushings, linear guides, ball screws, and others. Through electroplating, an alloyed surface is formed to create an anti-corrosion coating (black film) on the component.

Hose Provides Maximum Flexibility

March 11, 2008 10:05 am | Product Releases | Comments

E-Z Form Hose, a family of new industrial hoses, provides extreme flexibility while retaining full-flow performance.

Multiport Serial Card Lines Certified for Vista

March 11, 2008 10:05 am | Comtrol Corp. | Product Releases | Comments

The “Certified for Windows Vista” logo identifies the Comtrol Rocketport Express and Rocketport Infinity product lines as fully designed and tested for the latest 32-bit and 64-bit Microsoft operating system.

Advertisement

Quick Disconnects Connect Without Spray or Leakage

March 11, 2008 10:05 am | Beswick Engineering Co., Inc. | Product Releases | Comments

The dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. The assembly is constructed of stainless steel throughout and weighs only 15 grams.

Anti-Backlash Assembly Eliminates Drag and Wear

March 11, 2008 10:05 am | Kerk Motion Products | Product Releases | Comments

The VHD series eliminates drag and wear associated with high pre-load forces. The anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any of the company’s nut assemblies.

Load Cell Amplifier Provided Lead Free

March 11, 2008 10:05 am | Futek Advanced Sensor Technology, Inc. | Product Releases | Comments

The CSG110 inline signal conditioner/amplifier can now be provided lead free per RoHS directive’s requirements.

Custom Coil Cords Provide Reliability

March 11, 2008 10:05 am | Carrio Cabling | Product Releases | Comments

Custom coil cords are manufactured exclusively in the U.S. using the company’s lot size of one and Six Sigma manufacturing process, which equates to excellent turn-around times and near-zero defects.

Yellow Laser Offers Higher Power and Low Noise

March 11, 2008 10:05 am | Coherent Semiconductor Group | Product Releases | Comments

The Compass 561 laser delivers 50 mW at 561 nm, while still offering substantially lower noise than any other solid state yellow laser currently available. Specifically, this frequency doubled, diode-pumped solid state laser has a noise specification of 0.

Ultra-Miniature, Half Pitch, Side-Actuated DIP Switch

March 11, 2008 10:05 am | C&K Components | Product Releases | Comments

Designated the TDP Series, this ultra-miniature, surface mount, side-actuated DIP switch features a dual bifurcated wiping action that ensures reliable contact. When mounted horizontally, the side-actuation mechanism provides visual confirmation of the on/off status. The switches measure just 4.

Vision Sensor Inspects Small Features Over a Wide Area

March 11, 2008 10:05 am | Cognex Corp. | Product Releases | Comments

Designed to inspect small features over a wide area, Checker 232 provides reliable inspection results on the fastest production lines, detecting and inspecting up to 1,500 parts per minute. It is ideal for applications where small features are being inspected on large parts.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading