This double-coated polyester film tape�M—is designed to bond to most foam and gasket materials.
The HEA/HEB series solenoid valves are thin, compact, and can be configured in many different ways for design flexibility to meet a variety of application requirements, including high pressure operation. The valves are 10 mm wide, deliver a 0.
Many medical environments and applications require shielded patient cables with low signal loss and ruggedized construction. Unitized, shielded cable is molded with the cable, yoke, and leadwires as a single molded unit, preventing accidental lead disconnection.
The LTC liquid diaphragm pump achieves optimal performance by incorporating several innovative features to eliminate leaking and enhance dry self-priming. The patent pending Fluid-Blok advanced sealing technology eliminates leaks.
This long distance infrared switch has a reflective distance of more than one inch, depending on circuitry. Designated the OPB732 series, the reflective switch configuration includes an infrared LED and phototransistor, and uses an opaque housing to reduce the sensor’s ambient light sensitivity.
The GECA40 is in an industry standard footprint for easy drop-in replacement, offering high reliability. It is a 40 watt internal power supply with commercial wide-range AC input 90-264 VAC.
For reduced dust generation, the Type CKR actuator incorporates a unique sealing mechanism that achieves cleanliness of Class 4 under the ISO 14644-1: 1999, which is equivalent to Class 10 under Fed. Std. 209E (internal suction, under down flow environment).
While the MicroPlus blender accommodates processing machine throughputs of 100 to 350 pounds per hour instead of the 100-pound maximum of the widely used MicroBlender, it provides the same user-friendly features for reducing downtime during color or job changeovers.
Strain relief clamps are made from heavy galvanized steel and clamp onto a cable or cord inside the equipment to protect the cord from damage caused by pulling or stretching.
Offering a simple yet effective solution, a series of anti-backlash nuts are designed to optimize system stiffness without sacrificing life or increasing drag torque.
With an external motor-diameter of only 20 mm and a length of 57 mm, the power to volume ratio of the Series 2057…B is excellent. The motor uses the “System Faulhaber” skewed winding in combination with a rotor made of neodymium rare-earth magnets to provide cog-free motion.
This line of compact drives feature controllers, sensors, and motors in an aluminum casing, that, when combined with the company’s existing products, produce robust, space-saving, and high power density drive solutions.
The VLT AutomationDrive variable frequency drives are available in the 40 to 60 HP power range. This power extension covers IP21 and IP55 rated enclosures in the voltage range 380 to 480/500 V.
The Elliptecmotor is a low-cost piezo motor that weights 1.2 g. With a few microns step size, motion speeds from several microns per minute up to several hundred millimeters per second are achievable. The direct driving forces of 0.3 – 0.5 N can be increased up to 5 N with simple levers or gears.