Two fuse holder series, the 8092 series, and the 8093 series, have been developed recently. The 8092 series fuse holders are designed to accommodate both the international 5 × 20 mm fuse and the North American 1/4" × 1 1/4" fuse.
The SignalCal 2 T/C is a compact, lightweight, and easy-to-use hand-held calibrator that simulates both voltage and thermocouple readings. It is built rugged and ships with a holster and calibration certificate included.
The WT30 Wireless Serial Communications system eliminates barriers to communicating with moving equipment, retrofitting networking on running devices, and evading obstacles where wiring is impractical.
The Single Solution kit offers an in-wall power solution when only AC power is needed, allowing it to be separated from the A/V cables. The Total Solution integrates both AC power and A/V cable pass-thru wall plates in an elegant and streamlined design.
The Hoopster retaining rings fit into much shallower grooves than regular snap rings or retaining rings. The Hoopster's low profile, precision circularity, and small radial size allow it to be an unobtrusive component in an assembly.
The MR318 fiber optic rotary encoder is designed specifically for use as feedback in motion control systems operating in extreme electromagnetic fields.
A line of operating system-independent, USB hardware modem modules feature -40°C to 85°C operating temperature. The modules have received global telecom and safety agency approvals, including IEC60601-1 (medical compliance).
An expansion on medical silicone tube extrusion capabilities, the new systems provide in-line close tolerance cutting of silicone tubing directly from the extrusion machine as well as in-line spooling and cut-to-length from a spool.
Design engineers using 0.075" pitch 117 position BGA ICs will be interested in the PA-BGA117C-P-S-01 prototyping adapter. A clam-shell spring pin ZIF socket (SS-BGA117C-01 sold separately) can be used with the adapter, which provides easy access to address and data lines and simplifies IC swap out.
A versatile, straight hemostasis valve helps eliminate the backflow of fluid and accommodates a variety of devices up to 9.25 French, such as catheters, scopes, lasers, and guidewires.
Called LASORB, the component is described as an "ESD absorber" that protects laser diodes, photodiodes, and LEDs from single, multiple, and repeated ESD events of either positive or negative polarity.
SmarTRACK is an intelligent connector system with integrated firmware designed to help prevent misuse of devices. It controls information embedded into a connector, such as product identification, serial number tracking, storage/retrieval of calibration data, and counting or usage timers.
Designed for all small handheld devices, the miniature Transguard 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss. Its multilayer varistors are ideal for embedded components, such as hearing aids.
PLT series of precision low-TCR thin film resistors feature a low standard TCR of ±5 ppm/°C and tolerances down to ±0.02% over a wide temperature range of -55°C to 125°C.
The Voltage Controlled Oscillator CRBV55FL-0136-0174 Red Box VCO operates from 136 to 174 MHz with a control voltage range of 0.5~4.5 V. It features a typical phase noise of -123 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +9 dBm.