Advertisement
The Essential Resource for the Medical Design Engineering Community
Subscribe to MDT Magazine All

Adjustable Pitch and Side Thrust Enhance Smooth Movement in Linear Positioning

June 25, 2009 7:58 am | Amacoil, Inc. | Product Releases | Comments

RS linear drives are now available with five linear pitch settings and adjustable axial thrust. This permits varying pitch/thrust combinations until optimum settings are achieved.

Fabrico Converts Flexible Materials Critical for Medical Products

June 18, 2009 11:03 am | Fabrico, Inc. | Product Releases | Comments

Using a fully-equipped Class 7 (10,000) cleanroom, the company converts materials such as electrical grade papers, films, coated cloths, laminates, and tapes for the most demanding medical applications.

Precision TCXO/VCTCXO Is Only 5 x 3.2 mm

June 18, 2009 11:03 am | The Connor-Winfield Corporation | Product Releases | Comments

The 5 x 3.2 mm M Series TCXO/VCTCXO is designed for use in instrumentation as well as other applications requiring tight frequency stability in a small package. The use of analog temperature compensation allows for a holding sub 0.28 ppm holdover over multiple temperature ranges.

Advertisement

Snap Action Switch Features Surface Mount Termination

June 18, 2009 11:03 am | E-Switch | Product Releases | Comments

This snap action switch, the TS2 series, is a subminiature switch featuring surface mount termination. Its small package size is designed for higher reliability applications and, because of its unique SMT design, will be popular on many board-level applications.

Counterbalanced Hinges Provide Fingertip Convenience for Lifting and Positioning

June 16, 2009 11:28 am | Southco | Product Releases | Comments

This line of standard ST-12C counterbalanced hinges provides consistent, high-torque performance in a compact package, enabling equipment operators to lift and position hinged components with less effort.

High Precision Positioning Stage for Long Travel

June 16, 2009 11:28 am | Steinmeyer, Inc. | Product Releases | Comments

The PMT320 model offers a repeatability of +/- 1 micron, excellent straightness, run-out accuracy, and travel distances from 600 to 1,500 mm. The stage has a 320 mm wide die cast base profile and the 1,000 mm stroke stage weighs 70 kg.

Miniature Plastic Components Feature Intricate Shapes and Precise Details

June 16, 2009 11:28 am | Venmark International | Product Releases | Comments

These miniature plastic components are die-cut using die-less digital equipment to produce parts with +/- 0.005 in. precision and narrow cross sections (1:1 ratio to part thickness) which can be supplied plain or with adhesive backings.

25 W Power Supplies Offer Low Cost

June 15, 2009 11:21 am | Power Sources Unlimited Inc. | Product Releases | Comments

The GE-25 Series contains general purpose, low cost, highly reliable 25W power supplies. Units have an 88-264 VAC (125-373 VDC) input range, and the single output voltages of 3.3 to 48 VDC have a +/-10% adjustment range. Efficiency averages 81% and GE-25’s no-load power consumption of &lt0.

Advertisement

Improved Resolutions for Miniature Position Sensors

June 15, 2009 11:21 am | New Scale Technologies, Inc. | Product Releases | Comments

The miniature Tracker position sensor has improved 0.5 µm resolution and additional packaging options. It is suitable for a wide range of applications including precision biomedical devices and optical instrumentation.

3U and 5U Plug-In DC/DC and AC/DC Converter Modules

June 15, 2009 11:21 am | Schaefer, Inc. | Product Releases | Comments

The C5100 Series is available in three standard DC input voltage ranges from 320-800 VDC. Single outputs are available in six standard ranges from 23-200 VDC. All outputs are adjustable and fully regulated to 0.2% or better (load) and 0.1% (line).

Wrist Strap and Ground Monitor for Electronics Assembly

June 8, 2009 7:54 am | 3M Company | Product Releases | Comments

This wrist strap and ground monitor provides effective workstation monitoring in applications with two metal ground requirements. The 773 monitor grounds and monitors two operators and two metal grounds.

Sheet Available in Lower Gloss Finish

June 8, 2009 7:54 am | KYDEX, LLC | Product Releases | Comments

The Kydex FST sheet is available in a lower gloss finish, integrally colored metallic, with a texture called PB-Brushed Metal, or as an injection-molding resin.

VMC Offers High Performance and Increased Productivity for Precision Metal-Cutting Applications

June 8, 2009 7:54 am | Mag Industrial Automation Systems Llc | Product Releases | Comments

The VMC 4020 FX combines a 1219 x 508 mm table with a maximum table load of 1,651 kg, 15,000 RPM air/oil spindle, and the Infimatic Freedom NC200 control featuring a special performance package.

For Quality Overseas Molds, Don’t Call a Broker

June 8, 2009 6:19 am | Articles | Comments

The ideal method of doing business in a fast-growing nation like China is for a firm to place its own personnel on the ground.

Resin Portfolio Helps Bring a Diabetes Treatment to the Market Quickly and Efficiently

June 8, 2009 6:19 am | Articles | Comments

The World Health Organization reports that close to 177 million people worldwide currently suffer from diabetes and this figure is expected to more than double by 2030. However, getting new treatments to patients can be complex and time-consuming, especially for small, specialty companies.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading