Advertisement
Articles
Subscribe to MDT Magazine Articles

Elegant Delivery Solution for Reagents in POC Diagnostics

May 7, 2015 3:58 pm | by Blake S. Perkins, Executive Director, Diagnostic Business Development, J-Pac Medical | J-Pac Medical | Comments

The continuing growth of point-of-care (POC) in vitro diagnostic (IVD) testing is supported by technology improvements and the recognition that rapid test results offer economic and patient outcome benefits. Frangible seal technology offers...

TOPICS:

Clamping Down on Harmful Harmonics

May 5, 2015 10:18 am | by Steve Hughes, Managing Director, REO UK | Comments

It seems that human-kind has an insatiable appetite to dominate every aspect of our environment. At home, in the car or at the office, we demand complete control. Innovations in medical technology (MedTech) are helping us to achieve this and...

TOPICS:

Meeting UDI Requirements with Laser Marking

May 4, 2015 10:14 am | by Tom Glass, President, Able Electropolishing | Comments

Since the FDA’s Unique Device Identification (UDI) final ruling in late 2013, medical device manufacturers have turned to laser marking to help them meet the administration’s requirements. In September of 2013, the Food and Drug Administration...

TOPICS:
Advertisement

Obtaining Robust Ultrasonic Welds for Medical Device Assemblies

April 30, 2015 10:35 am | by Jeffrey Thumm, Charles Aubin, and Benjamin Piecuch, Proven Process Medical Devices; Barbara Donohue, Technical Writer | Proven Process Medical Devices | Comments

Ultrasonic welding is particularly suited for bonding medical devices because it uses the device material itself to form a bond and does not introduce glues or adhesives into the device. A fast, clean, efficient and repeatable process...

TOPICS:

Stop, Collaborate & Listen

April 29, 2015 11:09 am | by Kaylie Duffy, Associate Editor, PD&D, @kaylieannduffy | Comments

Screening newborn infants for hearing loss is a relatively new practice that didn’t become common in the United States until the mid-to-late 1990s. Before its introduction, children often weren’t diagnosed with congenital hearing loss until they...

TOPICS:

3 Keys to Medical Device Development Excellence

April 13, 2015 11:29 am | by Mohan Ponnudurai, Industry Solution Director, Sparta Systems, Inc. | Comments

Some of the future-looking technological developments in medicine, including surgeries enabled by virtual reality, remote surgery, needle free treatments and even electronic aspirin, all have the same mission in mind – to deliver the highest level...

TOPICS:

Circulatory Support Without Surgery

April 10, 2015 11:11 am | by Omar Benavides, Ph.D., Senior Product Development Engineer, Procyrion, Inc. | Comments

Heart failure accounts for 3.6 million hospitalizations, 300,000 deaths, and $35 billion in annual healthcare costs in the US alone. More than 3 million heart failure patients currently suffer from chronic fatigue and painful swelling while...

TOPICS:

New Memories Breaking the Gamma Barrier for Medical Consumables

April 9, 2015 10:25 am | by Nathan Sharp, Business Manager, Maxim Integrated | Comments

Today’s medical instruments and their supporting equipment often incorporate single-use consumable sensors, cables, probes, and/or other peripherals to ensure sterility before making contact with the patient. In many cases these consumables...

TOPICS:
Advertisement

Achieving UDI Compliance & Reducing Print Time

April 2, 2015 3:40 pm | by Josh Roffman, Vice President of Marketing & Product Management, Loftware | Comments

Founded more than 30 years ago in Switzerland, EMS Electro Medical Systems is a manufacturer of micromechanical instruments. Specializing in the design and development of orthopedic, urological and dental prophylaxis devices, the company...

TOPICS:

Microvalves: Enabling a New Technology for Tissue Expansion Systems

April 2, 2015 2:50 pm | by F. Mark Payne, Director of Research and Development, AirXpanders | Comments

Each year, approximately 250,000 women in the U.S. are diagnosed with invasive breast cancer. As a result, more and more patients with cancer in one or both breasts are making the difficult decision to undergo a unilateral or bilateral mastectomy...

TOPICS:

New Pumps and Valves Take the Pain Out of Designing Anesthesia Support Devices

April 1, 2015 11:20 am | by Richard N. Whipple, Marketing Communications Manager, & Jonathan DeSousa, Division Applications Team Supervisor; Precision Fluidics Division, Parker Hannifin Corp. | Parker Hannifin Corporation | Comments

Most next-generation medical devices are getting smaller and more portable to meet the needs of an ever changing hospital environment. But while device sizes are decreasing to help reduce weight and facilitate portability, device performance...

TOPICS:

3D Printing a Smile on Your Face

March 31, 2015 10:20 am | by Kaylie Duffy, Associate Editor, PD&D, @kaylieannduffy | Stratasys, Inc. | Comments

Although additive manufacturing equipment and materials have been around since the early 1980s, 3D printing didn't become common knowledge to much of the public until two decades later. Today, the applications for this technology seem almost...

4 Best Practices to Keep Pace with Rapid Healthcare Software Development

March 30, 2015 10:45 am | by Eugene Borukhovich, VP of Healthcare, European Markets, SoftServe, Inc. | Comments

Fueled by advances in computing, wireless technologies, data warehousing, and analytics science—combined with the widespread adoption of smart devices, cloud computing, and SaaS information models—all markets and industries are under pressure...

TOPICS:

Organ Printing, Regulation in the Spotlight on MDT Live

March 27, 2015 3:39 pm | by Megan Crouse, Real Time Digital Reporter, @abmdigi | Comments

3D printing for medical devices is still a wild frontier without thorough regulation, which can both make building a product difficult and can spur innovation. Three experts sat down with Editor-in-Chief Sean Fenske this week to talk about...

TOPICS:

6 Mantras for Medical Device Manufacturers

March 27, 2015 11:32 am | by Bart Reitter, Director, QAD Life Sciences | Comments

If the physician’s maxim is Primum non nocere – first, do no harm – then a similar phrase can be applied to medical device manufacturers: produce safe, high-quality products with a reasonable return on investment. Lengthier and less succinct...

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading