Advertisement
Articles
Subscribe to MDT Magazine Articles

Using Notebook Studies to Help Ensure a Successful Reusable Device Cleaning Validation

July 16, 2013 2:34 pm | by Patrick Kenny, Director of Analytical Services, Microtest Laboratories | Microtest Laboratories, Inc. | Comments

Device manufacturers need to ensure their product will be sufficiently cleaned by healthcare professionals. This article will focus on the areas of the FDA’s guidance document that are causing difficulties in cleaning validations, and will demonstrate how pre-validation laboratory work can help save time and money.

TOPICS:

Ensuring the Right Fit: Medical Device Testing and the Human Factor

July 16, 2013 2:12 pm | by Chris Evans, Director of Innovation—Pharmaceutical Delivery Systems, West Pharmaceutical Services | Comments

Device testing is required for a wide array of variables in the development of a medical device. When it comes to devices used directly by the patient, however, it is critical to test the patient/device “relationship.” This article looks at examining and testing the human factor when it comes to the handling of a medical device and how the design can be improved to enhance that relationship.

TOPICS:

The Power of LEDs Inside Medical Devices

July 15, 2013 3:12 pm | by Chuck DeMilo, Global Director of Product Marketing, Lighting Business Group, Luminus Devices | Comments

The medical device industry is constantly changing. New technologies and products enter the market, replacing outdated or inefficient equipment. There are numerous benefits in using LEDs for medical illumination applications including longer life, less heat, dynamic control, lower energy consumption, and in many cases, lower cost.

TOPICS:
Advertisement

Designing for the Critical Care Environment

July 12, 2013 2:49 pm | by Barry Crane, Chief Technical Officer, GlySure Limited | Comments

Critically ill patients present a number of challenges to effective monitoring. Various disease states complicate blood chemistry, compromise perfusion, and cause fluctuating blood pressure levels, heart rates, body temperatures, available oxygen, and pH. Furthermore, the pharmaceuticals used to treat these conditions can skew body chemistry and vital signs, adding to the complexity.

TOPICS:

Former Part-time Employee Heads Global Empire

July 12, 2013 10:43 am | by David Mantey, Executive Editor, PD&D | Comments

Glenn Smith celebrates his 40th anniversary with global distributor Mouser Electronics as the company’s president and chief executive officer. Smith recently took a moment to discuss disruptive technologies, the electronics industry’s inevitable slowing, and how some companies still inconceivably refuse to embrace the internet.

The New ASTM F1929-12: Which Method Is Right for You?

July 11, 2013 2:55 pm | by Jason Simon, DDL Packaging Lab Manager; Tami Presler, DDL Packaging Lab Supervisor; and John Cook, DDL West Lab Manager | Comments

Until recently, there was one method using dye to test for seal leaks in porous medical packaging. Now there are three methods manufacturers can select from for their product’s packaging. Which one should be used and why? This article attempts to tackle that question.

Considerations for Successful M2M Platform Deployments

July 10, 2013 2:42 pm | by Brian Anderson, VP of Marketing, Solutions & Services, Sierra Wireless | Comments

Cellular machine-to-machine communications are opening the door to a world of innovative new healthcare applications. With the ability to collect real-time data from people and devices anywhere, and at any time, healthcare organizations and technology vendors are creating useful applications that improve people’s health and well being.

TOPICS:

Molders Address Biggest Device Issues

July 9, 2013 5:14 pm | by Sean Fenske, Editor-in-Chief, MDT | PolyOne Corp., JunoPacific, Inc., Advanced Molding Technology | Comments

There are many “hot button” issues that are of concern to medical device companies, such as infection control, the UDI rule, or the trend toward home healthcare. Since plastics are such a huge part of the design of medical devices, the molders who work with the OEMs are doing everything they can to address these same issues to help alleviate the challenges faced by designers.

TOPICS:
Advertisement

How MedTech Manufacturers Save by Outsourcing Their Warehousing

July 8, 2013 2:48 pm | by Dennis Deming, Agency Owner, ICAT Logistics, Portland | Comments

Warehousing products can be a costly proposition for medical technology and device manufacturers. It requires leasing and management of a facility, as well as the overhead that goes along with that proposition. Using a warehousing provider can offer a more cost-effective and hassle-free way to fulfill orders.

Bringing Healthcare Home: Telemonitoring Gains Enthusiastic Demand

July 3, 2013 2:35 pm | by Melissa Barnes, Associate Editor, MDT | Comments

The exciting growth the medical telemonitoring sector has seen recently is impressive. According to Frost & Sullivan, the industry is expected to exceed double the revenues of previous years. The reason for this growth is twofold: necessity and innovation.

TOPICS:

Enabling the Next Generation of Implantable Devices Through Fiber Extrusion Processes

July 2, 2013 11:29 am | by Dr. Kevin Nelson, Founder and CSO, TissueGen | Comments

Enabling the delivery of a drug directly to the treatment area significantly enhances effectiveness. Today, innovative new devices incorporating drug-loaded fibers into implantable textile structures have the potential to deliver this type of benefit to an array of therapeutic treatments.

TOPICS:

Implantable Drug Delivery Devices—An Overview

July 1, 2013 4:13 pm | by James Arps, Ph.D., Director, ProMed Pharma LLC | ProMed Molded Products, Inc. | Comments

As more therapies are able to indicate implantable devices for treatment, incorporating drug delivery into them can be a significant additional benefit. Even when drug delivery is the primary function, implantable devices can be preferable. This article reviews some representative applications that device designers can leverage in developing new products for the implantable drug delivery market.

TOPICS:

Device Shrinkage Achieved Through Consideration of Assembly Factors

June 28, 2013 10:49 am | by Yousef Heidari, VP of Engineering, SigmaTron and Andrew Vo, Director of Test Engineering, SigmaTron | Comments

As medical devices continue to get smaller in size, the assembly of the internal electronics becomes more critical. Like a puzzle, fitting all the necessary pieces together in a smaller space is no simple task. When outsourcing is involved, synergy between teams is critical. The earlier a medical device manufacturer’s design team and their contractor’s team begin working together, the better.

8 Contract Manufacturing Pitfalls to Avoid

June 27, 2013 2:05 pm | by Troy Hanes, Director of Manufacturing Engineering, Sparton | Sparton Medical | Comments

Selecting the best contract manufacturing partner can be a tricky process, especially for start-ups or companies new to the process. Since significant cost savings can be realized from working with a quality service provider, it is important for OEMs to identify key areas to make the process more efficient. This article outlines eight criteria to use during selection proceedings.

Engineering for Change Ambassador Awarded for Global Engineering Efforts

June 27, 2013 10:27 am | by Melissa Barnes, Associate Editor, PD&D | Comments

The Society of Women Engineers, along with the American Society of Mechanical Engineers recently honored Noha S. El-Ghobashy with the Kenneth Andrew Roe Award. El-Ghobashy is an inspiring humanitarian working tirelessly to bring opportunities and advancement to underdeveloped nations.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading