Subscribe to MDT Magazine Articles

Choosing Sensors to Improve Sleep Apnea Machine Efficiency, Accuracy, and Reliability, and Enhance Patient Comfort

December 22, 2011 9:19 am | by A.J. Smith | Comments

Sleep apnea is a condition that impacts millions of people and can have a significant impact on their sleep. Treating such a condition can be challenging for medical device manufacturers. As such, this article looks at sensor solutions that can be used within a sleep apnea device, explains the differences, and provides valuable insight on the technology.


Key Elements of a Medical Grade Wireless Foot Switch

December 20, 2011 11:25 am | by Gary Argraves and Charles Reynolds | Comments

Wireless foot switch technology can be a preferred control mechanism for a variety of medical devices. However, there are a number of considerations designers need to consider before looking to use this technology. This article serves as a primer for many of those considerations while also providing an overview of the technology.

Top 10 Tips for Efficient Thermal Management

December 20, 2011 6:38 am | by W. John Bilski, Senior Engineer, Thermacore Inc. | Thermacore, Inc. | Comments

With more medical devices containing electronic components, the heat generated by these components becomes a greater issue for the designers of the finished products. As such, consulting with a thermal management expert prior to designing...


Cloud to Service Endpoints - The Missing Link

November 15, 2011 3:30 am | by Paul Anderson, Wind River ( | Comments

I remember as a kid I was fascinated with phones. The idea that you could pick up the phone, dial it, and talk to someone on the other end was pretty neat.

LTE Deployment and Timing Considerations

November 14, 2011 9:38 am | by Deepak Kataria, IPJunction ( | Comments

When considering the deployment and timing considerations for LTE and LTE Advanced, a well thought out migration strategy needs to be in place.

LCD Market Trends - Smartphones vs. TVs

November 14, 2011 5:10 am | by Gyan Tiwary, SVP and General Manager DC/DC Business, iWatt ( | Comments

This past summer, for the first time in the history of LCDTVs, the average selling price (ASP) of a 42” LCDTV dropped below that of a Smartphone.

Answering the Antimicrobial Question

November 11, 2011 10:42 am | by Larry Gabriel | Comments

Due to recent changes regarding the reimbursement (or lack thereof) for treatment of secondary infections that patients sometimes acquire during a hospital stay, great interest has developed in finding technologies to reduce and ultimately eliminate these problems. This article looks at how one material supplier specialist is addressing the challenge.

Securing Success for Orthopedic Implants

November 11, 2011 10:11 am | by Del Williams | Comments

The Challenge: A company needed a fastener for an orthopedic device that would offer a high degree of repeatability in motion without a loss of function. The Solution: The Spiralock self locking fastener successfully survived load and fatigue testing to one-million cycles without loosening or backing out.


Roundtable Q & A: Medical Electronics

November 11, 2011 9:38 am | by Seamus Grady, Dr. Juergen Schilz, and Bill Tormey | Comments

In this “Roundtable Q&A,” industry leaders provide insights on medical electronics topics, including the design impact of consumer electronics, obstacles to success with taking a product from wired to wireless, and the value of making devices “smart.”

Battery Holders Adapt to Handheld Device Needs

November 11, 2011 9:15 am | by Thomas Blaha | Comments

With handheld medical devices getting smaller and smaller, consideration is being given to every component on the device. This includes the battery holder section. While often overlooked, taking this portion of the device into account early in the development process can result in a clever solution to prevent it from adding too much “bulk” to a device design.

Berkeley Lab Researchers Ink Nanostructures with Tiny ‘Soldering Iron’

November 10, 2011 7:00 am | by Berkeley Laboratories | Comments

Researchers with the U.S. Department of Energy Lawrence Berkeley National Laboratory have shed light on the role of temperature in controlling a fabrication technique for drawing chemical patterns as small as 20 nanometers.

Challenges and Rewards of Molding Silicone

November 9, 2011 11:50 am | by Mats Håkanson | Comments

Silicone is a significant material in medical device design. As such, finding an expert partner who understands all of its benefits and challenges is key for manufacturers who wish to implement the material into a product. This article highlights several advantages of using silicone for component fabrication as well as some of the obstacles to success.

Anodized Device Delivery: The New Face of Medical Packaging

November 9, 2011 11:12 am | by Steven Rusch | Comments

Traditionally, the appearance of medical devices was an afterthought and not considered a critical element of design. However, with more devices being used directly by the patient, aesthetics have come to the forefront. This article looks at a technology that helps maintain a high level of functionality in the packaging of a device and couples it with a great appearance.

High Powered Medicine

November 9, 2011 11:02 am | by Dr. Thomas Dittrich | Comments

The trend to miniaturize medical devices is active throughout the industry. With it, the challenge of identifying power solutions for these technologies is one that medtech companies are eager to solve. This article highlights one specific design option, that is, high energy lithium metal oxide batteries and showcases the advantages they present.


Printed Electronics Technology Moves Closer to Fully-Printed Devices

November 9, 2011 7:12 am | by Dr. Harry Zervos | Comments

Screen Printing is one of the more established technologies utilised in the manufacture of what a lot would consider "conventional" electronics.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.