Subscribe to MDT Magazine Articles

Understanding the Role of Silicones in Controlled Release Applications

June 17, 2010 12:20 pm | Comments

This article will highlight key attributes of certain silicones, as well as key considerations when selecting a silicone.  As one of the most widely researched biomaterials to date, silicone has an approximate 50-year legacy of use in the healthcare industry. This history of biocompatibility has made silicone


Adding Greater Precision to Cardiac Ablation

June 17, 2010 11:45 am | Comments

Cardiac ablation is used extensively for treating cardiac arrhythmia, but has been hindered by the lack of an adequate feedback mechanism for determining tissue temperature during ablation. This article describes a system based on microwave sensing technology that allows both heating at RF or microwave frequencie


Morgan Electro Ceramics Powers the Ultreo Ultrasonic Toothbrush

June 17, 2010 10:08 am | Comments

By taking existing technologies, and reimagining them within a new context, scientists and manufacturers are able to produce innovative solutions to many everyday problems. For example, the efforts of a professor from the University of Washington, the Optiva Corporation, and Morgan Electro Ceramics have yielded a grou


Advanced Materials in Mass Spectrometry Instruments

June 17, 2010 9:41 am | Comments

The global market for mass spectrometry, already surpassing $3 billion, is expected to grow by eight percent per year through the end of the decade, according to Spectroscopy Magazine and Instrument Business Outlook. The growth is fueled by continual advancements in technology, which have positioned mass spectrometry

Six Ways Outsourced Maintenance Saves

June 17, 2010 8:21 am | Comments

The following article identifies the benefits of bringing in outside maintenance expertise to perform functions that otherwise consume resources that can be better used in a production mode.   Ron Hoffman With today's limited

Five Tips for Smoothing the Transition from Design to Manufacture

June 17, 2010 7:57 am | Comments

In the fiercely competitive medical device and instrumentation industry, speeding time to market is important to edge out competitors and begin generating revenue for products that often carry long and expensive research and development cycles. Pushing products through the development

The Implications of Google Health and PHRs Generally on Medical Device Design

June 17, 2010 7:27 am | Comments

When the Wall Street Journal, New York Times, Business Week, and USA Today all have articles discussing the most recent entrant to the Personal Health Record (PHR) space, then something significant might be happening. Regardless of Google’s success in its

Minus K Technology: Measuring the Electron Transport Properties of DNA Molecules

June 17, 2010 6:25 am | Comments

DNA has begun to be considered as a possibility for molecular electronics. At Israel’s Weizmann Institute of Science, scanning probe microscopy and negative stiffness vibration isolation enables nano level DNA research. by Jim McMahon Because DNA is able to recognize


Reconfigurable Modular Conveyors: Equipment that Unites Controllers and Engineers

June 16, 2010 12:53 pm | Comments

Total cost of ownership in sync with Pre Growth strategies With the economic outlook today, it would appear that controllers and engineers are in direct opposition when searching for methods to enhance the bottom line. Controllers want to reduce expenditures

Making the Safe Choice in Coating

June 16, 2010 12:05 pm | Comments

With commercial survival at the top of everyone’s agenda, many medical device and equipment manufacturers are looking to antimicrobial technology to give their product the edge, or to help them diversify into new markets. As BioCote’s sales manager Graham Harvey

Changing Times, Convergence Opportunities

June 16, 2010 10:57 am | Comments

The healthcare and life science industries are going through a change in methodology of treatment and cost containment pressures under a focused government controlled or nationally administered health insurance program. These new pressure points are making the pharmaceutical and medical device industry re-evaluate target therapy, point of administration, method of administration, portability of the product, country of origin, associated costs, and convenience for use.

Powering Ahead to a Successful Design

May 7, 2010 11:39 am | Comments

Power sources for medical devices must accommodate numerous requirements, from duration to size to durability. The market offers a plethora of choices of both primary (non-rechargeable) and secondary (rechargeable) batteries in a great variety of shapes, sizes, and chemistries. This article focuses on design considerations for primary cells, with a brief look at secondary cells.

Applying Tech: Orthopedics

May 7, 2010 11:29 am | Comments

How Are You Influencing Orthopedic Technology? Dr. Greg Hetland President, International

Applying Tech: Portable Medical, Part II

May 7, 2010 11:28 am | Analog Devices, Inc. | Comments

How Are You Influencing Portable Medical Technology? Dr. Robin Sarah Tichy Technical Marketing Engineer, Micro Power Electronics Inc. Micro Power Electronics specializes in the design and manufacture of custom battery packs that power portable medical devices.

Applying Tech: Portable Medical, Part I

May 7, 2010 11:28 am | Freescale Semiconductor, Inc. | Comments

How Are You Influencing Portable Medical Technology? Clark Hummel Application Engineer Manager, Intelligent Motion Systems Inc.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.