Advertisement
Blogs
Subscribe to MDT Magazine Blogs

A MedTech Accelerator Model

December 16, 2013 3:13 pm | by Laura Faulconer, Business Development Manager, STC | Comments

With the dramatic growth of the IT sector over the last decade, novel commercialization models like the start-up accelerator have emerged. A typical IT accelerator provides a small investment (usually $10,000 to $50,000) alongside rigorous...

TOPICS:

Through Emerald Lenses

December 13, 2013 2:43 pm | by Sean Fenske, Editor-in-Chief | Comments

Recently, I had the pleasure of a media tour to Ireland. While weather-wise, the Fall is not the ideal time of year to visit the island (although as I was informed, you don’t go to Ireland for the weather), it was fantastic timing in terms...

TOPICS:

Changing Medicine Through Technology

December 11, 2013 2:56 pm | by Michael Lewis, Writer, Money Crashers Personal Finance | Comments

Medical devices serve a number of purposes from the most mundane to the esoteric. Some are constantly being redesigned and updated to be more effective while others have remained little-changed for decades. Even bed pans—stainless steel...

TOPICS:
Advertisement

Revisit Your Patent Licensing Practices Now

December 10, 2013 1:58 pm | by Orion Armon, Partner, Cooley LLP | Comments

If your company licenses patented technology (in or out), it is time to revisit your licensing practices in light of recent (and anticipated) changes in patent law. In 2007, the U.S. Supreme Court held in MedImmune, Inc. v. Genentech, Inc...

TOPICS:

IEDM Conference Gives Opportunity to Learn About State-of-the-Art Chips for Biology and Medicine

December 9, 2013 2:45 pm | by Mina Rais-Zadeh, 2013 Chair of the Sensors, MEMS, and BioMEMS Committee, IEDM | Comments

Increasingly more powerful electronics technology is making possible innovative medical products for a range of uses from diagnostics to treatment. What underpins that progress are continuing advances in the transistors, sensors, and related...

TOPICS:

3D-Printed Heart Uses Urine to Power Robot (Seriously)

December 6, 2013 10:44 am | by Kasey Panetta, Managing Editor, ECN | Comments

In the buzzword story of the year, researchers at the University of the West of England created a 3D-printed robot heart that runs on urine. That’s right, a printed organ that pumps pee through a robot. This hot topic cornucopia was actually...

TOPICS:

Smart Bras Track Your Mood

December 4, 2013 2:59 pm | by Melissa Barnes, Associate Editor | Comments

Do you or a loved one have an emotional eating problem standing in the way of your weight loss and healthy living attempts? Well, now there’s a bra for that. Microsoft recently reported it has been working on a “smart bra,” equipped with a generic remote access sensing platform (GRASP).

Using ISO 21500 as the PMO Backbone for Medical Device Development

December 4, 2013 1:44 pm | by Martine Janicki Ph.D., PEng, PMP, Medical Device Engineer and Project Management Officer, StarFish Medical | Comments

It’s been a year since the International Standard Organization released its ISO 21500 –Guidance on Project Management. That’s about the same time StarFish Medical started its Project Management Office (PMO). This blog will explain the differences...

TOPICS:
Advertisement

Consolidation, Collaboration, Cooperation, and Closer Technology—Key Trends For Healthcare 2014

December 3, 2013 12:01 pm | by GHX | Comments

The healthcare industry has been primed for healthcare reform and according to GHX, 2014 will bring even more change to the business of healthcare. The company is predicting that 2014 will be a year of great healthcare evolution, not necessarily...

TOPICS:

Printing New Skin to Improve Burn Treatment

December 2, 2013 2:26 pm | by William Rusnak, Student, Drexel University College of Medicine | Comments

One of the most devastating injuries a person can suffer is a burn injury. Aside from the excruciating pain, severe burns disrupt the body’s skin, its outermost layer of protection from temperature changes and, more importantly, infection...

TOPICS:

Freedom in Material Selection with Machining

November 27, 2013 11:26 am | by Greg Thompson, VP of Engineering, Sanmina Medical Division | Comments

Machining offers freedom in material selection that cannot be obtained with other fabrication methods. Machining also facilitates rapid implementation of design changes affecting the geometry and material. Machining is frequently used for...

Machining for Medical Device Components

November 26, 2013 12:28 pm | by Dan Grosberger, Tooling Supervisor, Crescent Industries | Crescent Industries, Inc. | Comments

Customers are requiring a one stop shop with a machining company which has the capabilities to do secondary operations like laser engraving, plating, anodizing, coating etc. Having one company to handle all of your machining requirements...

Fitting Devices to the Patient with Machining

November 22, 2013 3:00 pm | by Ted Driggs, Program Management Principal Engineer, Okuma | Okuma America Corporation | Comments

I predict that by using the cloud combined with MRI and CT scan technologies, there may be a time when medical devices will be partially created to fit the human patient prior to surgery and the final fitting will come next door to the Hospital...

TOPICS:

Gene Sequencing Devices Are ‘Next Generation’

November 21, 2013 3:10 pm | by Jeffrey Shuren, M.D., Director, CDRH | Comments

Just for a moment, imagine a scenario in which you have an illness that has eluded diagnosis. The usual suspects have been ruled out and no one knows exactly what’s making you sick. Using medical devices that FDA has now cleared for marketing...

TOPICS:

EMC Testing in Medical Device Development

November 20, 2013 12:11 pm | by Bjarne Hansen, Electrical Engineer, StarFish Medical | Comments

Medical devices containing electronics require Electromagnetic Compatibility (EMC) testing to ensure they can be used in the intended environment without failing or causing other equipment to fail. My blog Electromagnetic Compatibility (EMC)...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading