Techcon Systems, a product group of OK International and a
leading provider of fluid dispensing systems and products, will showcase its precision
valves in Booth #2148 at the upcoming MD&M West Conference and Expo,
scheduled to take place February 14-16, 2012 at the Anaheim
Convention Center in Anaheim, CA.
On display, the TS7000IMP uses a feed screw (auger) to
dispense fluid with a rotary displacement action, allowing ultra-precise
control of the dispensing process. The valve’s modular design allows quick and
easy replacement of the feed screw/chamber cartridge assembly without the need
to remove the valve from the machine. Additionally, the valve housing is
interchangeable to be used with TS5000DMP feed screw inserts.
The TS5000DMP dispenses material with a rotary displacement
action using a rotary feed screw principle. The disposable feed screw inserts
are replaced without the need to remove the valve from the machine. During
operation, air pressure pushes the material from the syringe into the feed
screw chamber. As the feed screw rotates, the material travels between the
threads and out of the dispense tip. The feed screw is driven by the DC
motor.
The TS5440 Microshot Needle valve is excellent for dispensing
low to medium viscosity materials 1-100K cps in very small deposits down to 0.05µl.
This valve can be controlled by a Time/ Pressure controller.
The new TS5540-MS Microshot Spray Valve is designed to spray
low viscosity materials through disposable dispensing tips. The spray pattern
range is 0.18" to 0.60" (4.6mm- 15mm) in diameter.
Techcon’s entry-level TS250 is ideal for general dispensing
applications, and the TS350 is capable of dispensing a wide range of fluid
viscosities. Both are immediately usable anywhere in the world with its
accompanying tools, accessories and universal power supply.
Techcon System’s 700 Series dispensing syringe barrels are
silicone and chloride-free and designed to work with industry standard
equipment. The syringe barrels are made
from low friction polypropylene to ensure accuracy, repeatability and
productivity.
Featured 700 Series consumables include the receiver head
assembly, end caps, air powered pistons, syringes, syringe assembly kits, and
tip caps double helix thread. Dispensing tip options include the TE Series Tips,
TE Series Bent Tips, TT Tips, TS-P Plastic Tips, and Brush Tips.
The TE Series Dispensing Tips consist of a stainless steel
cannula with a double helix polypropylene hub for secure syringe barrel
attachment. This premier line of dispensing tips is burr-free, and has an
electro-polished cannula for unobstructed and consistent material flow. Additionally,
the tips are silicone and chloride-free. Maximum operating pressure is100psi
(6.9bar).
Techcon Systems
www.techconsystems.com