Custom machined plastic and stainless steel tubular components are available with precisely drilled holes and precision OD and ID features for use in water and other liquid filtration.
This TouchPanel controller is designed for 3300 Series electromechanical instruments. Based on the latest touch-screen technology, the controller brings an innovative level of simplicity and ease-of-use to mechanical testing.
Extrusion set capabilities range from micro to large bore sizes with co-extruded tubing available. A broad range of materials and thermoplastic resins are available for device design including non-DEHP PVC tubing.
The 000-0356 high performance brushless DC frameless motor is designed for low voltage applications where a high acceleration, high torque motor is required at low speeds. At 48 volts, this motor operates at 1,300 rpm and comfortably delivers 70 oz-in. of torque with an efficiency of 80 percent.
The BLT-040 low voltage brushless servo motors measure only 41 mm square by 112 mm long. Construction is IP65 and all motors come with a built-in high-resolution encoder (2000 line typical) as standard.
These coiled cords are designed for use in medical interconnect applications. The wide variety of cords offers flexibility and durability in the most demanding environments.
These 40 watt triple output power supplies are designed for medical applications. All three models in the series deliver a total of 40 watts of DC power in an open frame configuration, with all medical agency and regulatory approvals completed, including UL2601-1, CE, FCC, and CISPR.
These compression fittings are designed for 1/4-in. OD tubing, 10-32 thread, in both straight and elbow configurations. The straight compression fittings MCB-14 (in brass) and MCB-14-303 (in 303 SS) are 53/64-in. long. They are designed with a 1/2-in. hexagonal body.
With a unified, one-piece configuration and minimal footprint, the Legex 322 CMM is designed for quick and easy setup and operation. It offers new opportunities to integrate automated measurement and inspection into a process, even where space is at a premium.
In response to high market demand for products that meet specialized application requirements, the customizable CS Series thermistors and CP Series probes are offered.
These EMI filters can be mounted with a single screw, allowing them to be used wherever needed to control EMI—even multiple locations within a piece of equipment. They use a UL94 VO plastic enclosure that increases protection against electrical shock.
This compact and lightweight step motor comes complete with a small E4 encoder from US Digital. The 1.8 degree NEMA 11, bipolar stepper and miniature E4 encoder are designed for flexibility in applications with limited space. The 211 Series motors measure a mere 1.1 in.
The SaniQuik Connection increases operational efficiency and provides a quick, easy link between disposable systems and existing stainless steel processing equipment.
This series of micro-miniature chip inductors are designed to provide extremely tight inductance tolerance with highly stable performance for applications where allowable deviation is critical. Featuring a miniaturized size of just 1.0 x 0.5 x 0.35 mm (Model PM0402T) and 1.6 x 0.8 x 0.