The Hoopster retaining rings fit into much shallower grooves than regular snap rings or retaining rings. The Hoopster's low profile, precision circularity, and small radial size allow it to be an unobtrusive component in an assembly.
The Single Solution kit offers an in-wall power solution when only AC power is needed, allowing it to be separated from the A/V cables. The Total Solution integrates both AC power and A/V cable pass-thru wall plates in an elegant and streamlined design.
The WT30 Wireless Serial Communications system eliminates barriers to communicating with moving equipment, retrofitting networking on running devices, and evading obstacles where wiring is impractical.
An expansion on medical silicone tube extrusion capabilities, the new systems provide in-line close tolerance cutting of silicone tubing directly from the extrusion machine as well as in-line spooling and cut-to-length from a spool.
Design engineers using 0.075" pitch 117 position BGA ICs will be interested in the PA-BGA117C-P-S-01 prototyping adapter. A clam-shell spring pin ZIF socket (SS-BGA117C-01 sold separately) can be used with the adapter, which provides easy access to address and data lines and simplifies IC swap out.
SmarTRACK is an intelligent connector system with integrated firmware designed to help prevent misuse of devices. It controls information embedded into a connector, such as product identification, serial number tracking, storage/retrieval of calibration data, and counting or usage timers.
A versatile, straight hemostasis valve helps eliminate the backflow of fluid and accommodates a variety of devices up to 9.25 French, such as catheters, scopes, lasers, and guidewires.
Called LASORB, the component is described as an "ESD absorber" that protects laser diodes, photodiodes, and LEDs from single, multiple, and repeated ESD events of either positive or negative polarity.
Designed for all small handheld devices, the miniature Transguard 0201 bi-directional transient voltage suppressor provides minimal signal distortion and low insertion loss. Its multilayer varistors are ideal for embedded components, such as hearing aids.
SMD HCMOS TCXOs and VCTCXOs are available in a miniature 3.2 × 2.5 mm package size. The 3.3-volt FOX923CH and FOX923CEH Series oscillators eliminate the need for supplementary external circuitry to obtain a HCMOS output.
The Voltage Controlled Oscillator CRBV55FL-0136-0174 Red Box VCO operates from 136 to 174 MHz with a control voltage range of 0.5~4.5 V. It features a typical phase noise of -123 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +9 dBm.
PLT series of precision low-TCR thin film resistors feature a low standard TCR of ±5 ppm/°C and tolerances down to ±0.02% over a wide temperature range of -55°C to 125°C.
Two quasi-CW UV lasers deliver the highest power currently available for products of this type.
Dow Corning Corporation has added two new product lines to its Active Protection System family of impact protection materials. The S-Range is based on 3D spacer textile technology while the TP-Range is based on thermoplastic technology.
Clean Air Products introduces Series 901 modular cleanroom walls. They are available in three standard designs, with custom sizes and shapes to suit various application needs.