China has been the subject of much debate throughout the manufacturing industry as more companies have considered it an option for reducing costs. However, quality concerns and increasing economic factors have caused some to rethink this outsourcing strategy.
Component designers no longer need be constrained by the limitations of injection molding tool design. The exact fitting, in the optimal layout for the process or product concept, is available with a line of Build-a-Part bondable components, designed for use with gases or liquids.
The 180W TMPC-180-1U has a height of 1.59? that makes the PC power supply ideal for 1U and other applications where height is limited. The unit, which contains a 90-265 VAC full range input and active PFC, is approved by UL, cUL, and VDE to UL 60601-1, EN 60601-1, IEC 60601-1 medical standards.
A CANopen option has been added to the company’s OEM servo motor controller. CANopen may be configured for peer-to-peer, master, or slave. This allows the controllers to share I/O and registers with other CANopen enabled SilverDust controllers or third party CANopen devices (e.g.
Economical, single use stainless steel instruments are offered as an inexpensive real metal alternative to plastic disposables. Manufactured in high quality mirrored stainless steel, these kit components are available in many styles.
The RoHS compliant EZ Limo EZSII motorized linear slide series uses a step motor to achieve high positioning response without any missteps. The series consists of three sizes: EZS3, EZS4, and EZS6. The EZS3 and EZS4 ranges from 1.97? to 27.56? stroke in 1.97? increments.
Tiny 0.118? OD by 0.078 ID thermoplastic seals are precision machined to handle fluid high pressures. These custom parts are machined to close tolerances from virgin PEEK polymer barstock.
The TFF400 reaction torque sensor has a USB Digital Interface with 16 bits resolution. The sensors feature a Flange to Flange mounting solution with torque measurements ranging from ±5 in.-oz to 500 in.-lbs and torsional stiffness of 325 in.-oz/radians to 199,000 in. lbs/radians.
The 1206 chip fuse offers rated current values up to 25 A. The slow-blow UST 1206 provides high melting I 2 t values for impressive inrush withstand performance.
This series of sub-miniature manifolds is offered for the 10 and 15 mm solenoid valves. Their extremely small size allows for groupings of valves in very small spaces. These single-sided units are available with 2, 4, 6, 8, 10, 12, 14, and 16 stations.
The proprietary RLP-125 actuator acts as both the motor and the diaphragm in liquid movement applications. The actuator may be embedded directly in a fluidic backplane to provide highly reliable pumping action with minimal impact on design architecture.
Due to their low profile, light weight and large through holes, ULT Series direct drive frameless motors are ideal for imaging, sensing, pointing, and scanning applications.
The 7210 and 7310 fiber laser coders are compact, fast, and highly reliable for direct parts marking and unique identification coding on a variety of hard-to-mark materials, including nearly any metal, ceramic, or plastic part.
In accordance with ISO 11607, Part 2, the sealing seams must show the following quality characteristics within the Operational Qualification-intact seal for a specified seal width; no channels or open seals; no punctures or tears; and no material delamination or separation.
The LX200 Label Printer utilizes the latest in monochrome high-speed inkjet printing technology. With 1,200 dpi print resolution, the printer has almost six times as many dots per inch as most thermal transfer bar code printers.