Keeping Track of Surgical Instruments
Mon, 11/10/2008 - 6:52am
The Project: Effectively read a 2D Data Matrix barcode off surgical instruments that differ in terms of reflectivity and shape.
The Solution: Use an ID reader that employs an innovative combination of lighting, software, and optics to achieve success.
John Lewis is Market Development Manager at Cognex. He has been writing about automation applications in the medical device industry for 12 years. Lewis can be reached at 508-650-3140 or email@example.com.
Censis has developed a software product called Censitrac that allows hospitals to set up surgical set pick lists and then ensures that the correct instruments are loaded into surgical sets. A 2D Data Matrix barcode is electrochemically applied to each instrument and this barcode is scanned during the assembly process to ensure accurate set assembly and track the location of every instrument. The challenge is that it is very difficult to read a barcode on the shiny surface of a surgical instrument. Censis went through five different generations of ID readers before it found one, the Cognex DataMan 7500, that provides the accuracy, speed, and ease of use required by this critical application.
The Surgical Set Assembly Challenge
“There are many problems with the traditional approach of using count sheets,” said Janice Hardrath, chief technology officer for Censis. “Count sheets are often produced on a spreadsheet and then photocopied. When the list changes, it is difficult to retrieve all of the old incorrect paper lists and replace them with accurate information. The biggest problem comes when surgical sets reach the OR with incorrect instruments or instruments missing. This often causes delays in the OR, risks to the outcomes of the surgical procedures, and dissatisfied surgeons.”
Another problem with the old approach is that there is no way to identify or document instruments or track their movements. In the event of a biological test problem with a sterilizer load, the hospital needs to know exactly which instruments were in the load and their current location. This is difficult with the conventional approach because it is necessary to rely upon handwritten notes and the memory of the person who assembled the set. Hospitals often lose large numbers of instruments and spend considerable amounts of money for replacements. Maintenance is also supposed to be performed on instruments after a certain number of uses but with the manual system, there’s no way to know how often each instrument is used so instruments are often over- or under-maintained.
An Innovative Solution
Finding the Right ID Reader
Generally, the scanners that Censis has tried in the past were able to read the marks by using algorithms that account for the reflectivity of the surface. The problem is that the scanning and computation took too long. When delays occurred, technicians typically pulled the instrument away and started over again or went back to the previous manual methods. The best results are achieved by moving the instrument slowly from one side to the others so that the scanner can view the mark from different angles and apply algorithms to account for the reflectivity.
Hardrath set up what she called a scan-off competition to find the best possible vision system for the job. “I put together an assortment of 30 different instruments of various types including curved, flat, shiny, matte, colored, and uncolored. I lined up three of the preferred models on the market, including the Cognex DataMan 7500. We asked a number of different people to scan each of the instruments. Then we measured the results, the amount of time required to scan each instrument, and the reaction of the people participating to each scanner.”
“The Cognex DataMan 7500 was noticeably superior to the other devices,” Hardrath said. “Most of the people that did the scanning commented that it was faster and easier to get a good scan with this ID reader. So we made the decision to exclusively offer the Cognex instrument with Censitrac. We now have 250 DataMan 7500 scanners out in the field. The average hospital has five of these scanners and the largest has 30. Our customers love them. Most have decided to replace their earlier generation scanners with the new Cognex units.”
Cognex DataMan 7500 series ID readers achieve their unique capabilities with an innovative combination of lighting, software, and optics. These ID readers incorporate software that handles a wide range of degradations to the appearance of the code. DataMan readers can illuminate marks of any type on any surface. The integrated diffuser provides soft illumination required for highly reflective parts such as electrochemical etched marks on shiny round surfaces. The unit is the first to offer a handheld verification solution that meets the requirements of the Association for Automatic Identification and Mobility (AIM) 2D Data Matrix code quality grading requirements.
Censitrac overcomes the problems associated with manual methods of tracking instruments and automated methods that track the set rather than the individual instrument. The software automates the set assembly process to ensure 100% accurate assembly and automatically tracks the movement of each instrument, whether it is in a set or in loose inventory. This makes it easy to locate any instrument immediately. Censitrac measures instrument usage, including which instruments in sets were used in procedures and which were not and determines exactly when maintenance is due.
Major Improvements at Saint Thomas Hospital
“We saw a major improvement when Censis upgraded us to the Cognex DataMan 7500 series handheld ID readers,” Stefanik added. “The first two scanners that we used were stationary and we had to run the instrument under them which was somewhat awkward. The DataMan 7500, on the other hand, is portable so we can move it over multiple instruments at a time, which saves time. The DataMan scanner is much faster than others we have used and the accuracy of the instrument is 100%. The DataMan scanner is also the most rugged we have seen. In the past, we were breaking them right and left but as far as I know, we have never broken a Cognex scanner.”
OnlineFor additional information on the technologies and products discussed in this article, see MDT online at www.mdtmag.com and the following websites: