Advertisement
Articles
Subscribe to MDT Magazine Articles

Using Dry Lubricants to Address Stacked Tolerances

April 6, 2010 5:07 am | Comments

Addressing tolerances is something with which most design engineers developing medical devices are familiar. The challenge can be even greater when dealing with stacked tolerances.

Making the Case for Enclosures

April 6, 2010 5:07 am | Comments

The Project: An enclosure was needed for a power source that aided surgeons with a very delicate procedure.

TOPICS:

Perspectives on New Materials, Part II

March 23, 2010 9:59 am | Pexco, LLC | Comments

New developments in material technology are critical to innovations across all industries, including medical device technology. Therefore, it is crucial for designers to stay abreast of the most recent advances that could benefit their upcoming products.

TOPICS:
Advertisement

Perspectives on New Materials, Part I

March 23, 2010 9:59 am | Memry Corp. | Comments

New developments in material technology are critical to innovations across all industries, including medical device technology. Therefore, it is crucial for designers to stay abreast of the most recent advances that could benefit their upcoming products.

TOPICS:

Adhesive Ushers Intelligent, Transdermal Drug Delivery

March 23, 2010 9:58 am | by Shirley Monte | Comments

The Challenge: An adhesive that would adhere to the body for three to seven days was needed for a transdermal drug delivery patch.

TOPICS:

The Quest to Replace Plasticized PVC Tubes

March 23, 2010 9:58 am | by Kyle Rhodes, Nadine Blaesing, and Rory Wolf | Dymax Corporation | Comments

There is a growing interest within the medical device community to replace plasticized PVC tubing with more environmentally friendly and less potentially harmful alternatives. However, bonding these different materials for traditional applications can prove challenging.

TOPICS:

Medical Manufacturers Drawn to Fast Growth of Combination Products

March 23, 2010 9:58 am | by Mark Paulsen | Comments

By Mark Paulsen Examples of miniature silicone combination products Combination products are a rapidly growing segment of the healthcare market that has attracted the interest of a growing number of medical device manufacturers.

Rethinking the Standard Device Pre-Clinical Testing Paradigm for Combination Products

March 23, 2010 9:58 am | by Drs. Donald F. Palme II and Linda Hansen | WuXi AppTec | Comments

Traditional testing procedures are satisfactory for the majority of today's medical devices. However, with combination products, testing can become a significantly greater challenge.

TOPICS:
Advertisement

Validation: Does the Supplier Share Your Interpretation?

March 23, 2010 9:58 am | by Dana Schramm | Comments

Validation is a critical element in medical device manufacturing success, but what if a supply

Battling Infection at the Material Level

January 26, 2010 8:34 am | by Michael F. Adams, Khristine L. Carroll, and Harold Garey | Comments

Hospital-borne infection is always a concern to healthcare professionals as the result can lead to increased care costs, increased hospital stay, and even patient death. In order to help combat this critical problem, one company has focused on combating these infections at the material stage.

Getting Packaging Right With Rapid Prototyping

January 22, 2010 10:59 am | by Kelly Doyle | Brentwood Industries, Inc. | Comments

Ensuring the design of a thermoformed package is correct is not something upon which medical device manufacturers want to spend significant time or money.

Perspectives on Lean Manufacturing, Part II

January 22, 2010 10:59 am | Comments

Lean manufacturing can help companies eliminate waste, reduce costs, and improve timeliness.

TOPICS:

Perspectives on Lean Manufacturing, Part I

January 22, 2010 10:59 am | Boyd Coatings Research, Inc. | Comments

Lean manufacturing can help companies eliminate waste, reduce costs, and improve timeliness.

TOPICS:

Honey, I Shrunk the Electronics!

January 22, 2010 10:59 am | by Jonathan Bearfield | Texas Instruments Inc. | Comments

The drive towards mobility and miniaturization of medical electronics is a goal of many of today's device manufacturers. However, each of them is attempting to miniaturize at different levels.

TOPICS:

Medical Goes Mobile

January 22, 2010 10:59 am | by Tom O'Dwyer | Analog Devices, Inc. | Comments

The push for miniaturization in medical devices is very apparent to manufacturers in all sectors of the industry. However, this trend is closely coupled with the goal of also making these smaller devices portable.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading