There are a number of successful approaches designers can take when developing a new medical device. However, as the market transforms with outpatients being the primary users of many devices over health care professionals, the critical design issues transform as well. This article looks at designing medical devices that are to be used by the outpatients themselves.
With the variety of tasks a cardiac catheter must accomplish, testing them to ensure safety and reliability is of critical importance. However, due to the range of tests that must be completed on them, this process can be lengthy and challenging. This article highlights the difficulties that can be encountered and offers a solution in the form of a new testing system.
As more medical device OEMs invent new ways to navigate the tortuous anatomy and open up clogged arteries, one constant remains—without high quality balloon tubing, producing high quality balloons consistently can be a real challenge. This article will highlight some of the considerations in manufacturing balloon tubing from Polyamide or Polyamide co-polymer materials.
Transferring fluids in healthcare applications can be a complicated procedure when trying to ensure there is no contamination from outside surfaces. Pinch valves offer a solution via a pinching mechanism that “pumps” the fluid through the tubing. This article examines the technology, offers considerations for selection, and highlights the types of tubing that are best suited for use.
The Project: Develop a system that reduces the needle drag and piercing resistance of the septum and injection site materials to increase product performance. The Solution: Chemists developed a family of self-lubricated polyisoprene materials that have been manufactured with a proprietary lubricant system and show a minimal reduction of physical and mechanical properties.
Before selecting a device coating, physical properties and provided benefits are not the only consideration for device designers. There are other critical factors that can significantly impact efficacy. This article reviews variables such as sterilization methods, shelf-life, and aging which can all have an adverse impact on the coating.
The Challenge: Identify a partner who is able to aid in the development of an injection molded plastic spring.The Solution: Spectrum was able to deliver the resulting product to Lee Spring for market in eight weeks, from first concept discussions through to final production.
As minimally invasive technologies continue to permeate the healthcare industry, device makers need to ensure that their products make the process as smooth as possible. To this end, one solution offered to the OEMs focusing on device delivery is a hydrophilic coating that helps minimize resistance the catheter could face when traveling through the body.
UV LED curing refers to a technique that utilizes “energy” output from the LEDs in the UV spectrum to treat inks, coatings, adhesives, and other UV curable materials. The energy generated by the ultraviolet light triggers a chain reaction, resulting in polymerization of the wet raw material, thus hardening (or curing) the material. This article looks at the technology.
The use of today’s advanced materials can be advantageous for orthopedic implants and instruments as they can offer a variety of benefits. However, they can also create challenges for developers concerned with getting the exact tolerances needed. Machining these materials to achieve the desired results is a service best outsourced to a solutions partner who is an expert with a given material.
Since medical electrical equipment must conform to a high safety standard, DC/DC converters are often used to provide the required electrical isolation. Reinforced isolation offers an additional level of safety beyond the standard, but up until recently, it was extremely difficult to find compact DC/DC converters with the large air and creepage distances required to meet the definition for reinforced isolation.
The purpose of a multi-lumen tube is to enable different functions within the smallest diameter possible in order to promote less invasive procedures. The complexity of the tubing can vary from multi-lumen extruded tubing to reinforced and steerable catheters. This article provides information on the construction of these catheters.
Over the last four to five decades, the use of medical implants for therapeutic applications has exploded. Fueled not only by a better understanding of human physiology, but also by the development of minimally invasive procedures and advances in biocompatible materials, these devices challenged conventional manufacturing methods. Accordingly, the advent of laser micromachining technology has enabled many of these advances.
Being mindful of the challenges and obstacles that can impede success when specifying micro injection molding processes can aid designers when planning to use this option for elements of their product. This article provides a comprehensive look at many of the areas of concern for component fabrication at this size and also offers solutions to the problems.
Roller pinion technology combines the best attributes of existing motion control technologies while eliminating most of their limitations. Differing from a traditional rack and pinion system, a roller pinion system features a unique roller pinion and toothed rack combination. Though, similar to a pinion/rack combination, the teeth on the pinion are replaced with bearing-supported rollers, which engage a unique tooth profile to ensure high positional accuracy and the elimination of cumulative error.