Subscribe to MDT Magazine Articles

Roundtable Q&A: Machining

October 17, 2012 5:06 pm | by Marty Cavegn, Steve Dicke, Pete Marut, and Trisha Mowry | Metal Craft Machine & Engineering, Connecticut Spring & Stamping | Comments

Representatives from machining companies serving the medical device community respond to questions including, " Why are machined components still a viable part option for medical devices over cheaper plastic ones?" " How have newer metals enhanced machined component offerings for medical device designers?" and " What impact have coatings made on the additional value machined components can offer?"

To Mold, or Extrude, That is the Question

October 17, 2012 4:39 pm | by Robert D. Schwenker and Aaron Updegrove | Comments

Selecting the right tubing may not be as straightforward as some medical device designers may think. This article will explore molded and extruded silicone tubing and address two areas that product development engineers should consider when seeking a solution—material differences and manufacturing advantages and limitations.

Designing a More Patient-Centric Battery Holder

October 17, 2012 4:23 pm | by Tom Blaha | Memory Protection Devices, Inc. | Comments

  Powering portable devices is a critical element in healthcare today as more and more medical technologies are used in the home or on the patient directly. As such, patients are responsible for the power supply (i.e., batteries) more often than a healthcare professional. As such, a new innovation in battery holder technology makes replacing them easier, which is most important for the very young and elderly.  


The Role of Coatings in Orthopedic Instrumentation

October 17, 2012 4:07 pm | by Don Garcia | Boyd Coatings Research, Inc. | Comments

High-performance coatings are being used across just about every device sector and on a variety of devices. Coatings can make components and the devices themselves stronger, safer, and more cost effective. This article looks at PVDF coatings and the array of benefits they offer when used on orthopedic tools.


Perspectives on Evolution of Miniaturization

October 17, 2012 3:39 pm | by Steve Kuckworth, Jessica Willing-Pichs, Ian Hardy, Chad Marak, John Beigel, Trygve Olsen, and Chris Ault | Clariant Corporation, Ximedica, Crane Aerospace & Electronics, Littelfuse, Inc., Meder Electronic Inc. | Comments

As medical devices migrate from the hospital to the patient’s home or workplace, two concepts will become increasingly important: manageability and security. Remote medical devices must often provide continuous care, regardless of their location. Consequently, IT teams will need to manage and control the devices remotely...


Roundtable Q&A: Contract Manufacturing

October 11, 2012 5:01 pm | by Mike Gaul, Al Hoffmann, Ruben Macias Jr., Tim Nakari, Chris Paolo, and Mike Treadway | Sparton Medical , Interplex Industries, Inc., Ximedica, The Tech Group, Inc. | Comments

Representatives from contract manufacturing companies serving the medical device community respond to questions including, "What is your best recommendation to ensure clear communication between the CM and the OEM?" "How do you alleviate concerns of the potential for you to work with a customer’s competitor?" and "How do OEMs benefit from CMs who develop products for other industries outside of medical?"

The Next Direction for Surgical Robotics

September 20, 2012 3:28 pm | by Kasey Panetta | Cambridge Consultants Inc | Comments

The world of medical technology has always been a rapidly changing and evolving field. Solutions for long plaguing problems, like reducing human error by using more robotics, begat more problems like an increase in mechanical failure during procedures. Plus, throw in rapidly aging baby boomers, an increase in global population, and a surge in demand for specialized doctors and the problems grow exponentially.


Getting In Your Head: An Interview with Professor Edward S. Boyden

September 11, 2012 2:37 pm | by Jeff Reinke | Comments

Professor Edward S. Boyden is probably one of the few individuals on the planet who is actually best described as a brainiac. Currently serving as the principal investigator at the Massachusetts Institute of Technology’s Synthetic Neurobiology Group, Boyden’s mission is to develop tools for controlling and observing the dynamic circuits of the brain.


Thermal Management: Solving Bigger Challenges in Smaller Devices

July 25, 2012 4:19 pm | by Michael Bucci | Thermacore, Inc. | Comments

Developing medical devices that are smaller yet offer more functionality is challenge enough. Designers, however, also have to deal with the additional heat that is generated from these devices. This article looks at a number of heat related concerns in today’s medical device designs and outlines a number of available solutions that can be used to address the problem.

Applying Tech: Implantables

July 25, 2012 2:58 pm | by Mark Russell, Tricia Rodewald, and Michael Klayman | Pro-Dex, Bal Seal Engineering, Inc. | Comments

How are you influencing implantable devices?


Precision Laser Processing Impacts Medical Device Design Options

July 25, 2012 2:46 pm | by Allan Callander | Comments

The development of laser technology in the manufacture of medical devices has so exploded in the past 20 years that it is now impossible to fully describe the breadth of applications in anything less than an encyclopedic volume. But a brief recollection of some of the key historical accomplishments and medical devices influenced can help shed light on what we can expect in the next decade.

‘Just Make It Smaller’

July 25, 2012 2:35 pm | by Jeremy Lug and Randolph Sablich | Metrigraphics, LLC | Comments

In the effort to make electronic medical devices smaller, there are a number of obstacles that must be overcome to achieve success. While “just making it smaller” may be the request from the OEM, the component suppliers have a much tougher road to provide the required part. This article looks at a number of factors that need to be examined and offers tips for success.

Power Possibilities for In-Home Patient Monitoring

July 25, 2012 12:07 pm | by Robin Sarah Tichy, Ph.D. | Electrochem Solutions | Comments

When seeking power solutions for in-home patient monitoring devices, manufacturers have an array of technologies from which to choose. However, the specific benefits and considerations for each must be evaluated for each application. This article highlights a number of these options and looks to consumer devices as excellent examples of how power technologies can best be used.

Perspectives On A Question of Safety

July 25, 2012 11:54 am | Accutek Testing Laboratory | Comments

How has news questioning the safety of medical devices misled the public about testing protocols?


Gearmotors: Achieving the Perfect Motor & Gearbox Match

July 24, 2012 2:59 pm | by Seth Hulst and Loren Kamstra | Groschopp, Inc. | Comments

For electrical and mechanical design engineers in the process of developing applications, choosing a gearmotor can be a tricky and arduous process. Can motors and gearboxes be purchased separately and then matched for an application? Is it better to specify a pre-engineered gearmotor? What are the differences? By following the two gearmotor selection methods readers will receive a checklist of considerations to determine which process would be the most helpful and steps to complete the gearmotor selection process. There are many factors to consider when choosing a gearmotor.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.