FDA Registered / ISO 13485:2003 Certified since its beginning in 1998, Rose Technologies has been committed to integrity, hard work, and customer service. We are committed to providing products which meet our customers' quality requirements. Each employee is responsible for maintaining quality within their department. At Rose Technologies we use continuous improvement methods to ensure that our quality meets our customers' needs.
We have 3 certified class 7 (10,000) clean rooms, one of which is specifically designed and controlled for processing silicone components. Our specialties are: Dip molded balloon cuffs, assemblies with cuffs, wire reinforced silicone Cannula bodies, single and multi-lumen tubes, wire reinforced silicone tubes with inner diameters from .050" up to .75", silicone insert molding and injection molding, tube hole drilling and notching, and complete Cannula. We can complete devices and package it for final shipping. Also, Tip Forming includes Catheters, Dilators, Sheaths, IV Catheters and butt welding. Materials include: Polyurethane, PTFE, PEEK, Polyethylene, PVC, FEB, PEBAX, Polypropylene, silicone, etc... We do Pad Printing, packaging and sterilizing, solvent bonding, hand assembly for low volumes and pilot runs and semi-automated runs for medium volume production. For normal to high volume our in-house engineers design and build the automated equipment necessary to manufacturer your medical device efficiently, economically, on budget and on time right here at Rose Technologies.
We want to get involved in your project early in its life cycle so that we can help you design for manufacturability. With our expertise and your designs we will help you make sure the device can be manufactured efficiently. If your new medical device needs to be tipped we can get it done, even if it requires a new machine be designed to do it we have the expertise in house. As engineers we know your language. Call for a review or to submit an RFQ.