Advertisement
News
Advertisement

FDA Clears Single-Use Antibacterial Surgical Respirator

Fri, 04/08/2011 - 12:35pm
Bio-Medicine.Org

SILVER SPRING, Md., April 8, 2011 /PRNewswire-USNewswire/ -- The U.S. Food and Drug Administration cleared the SpectraShield 9500 N95 surgical respirator, a device that kills 99.99 percent of three different kinds of bacteria when exposed to its outer surface.

(Logo:  http://photos.prnewswire.com/prnh/20090824/FDALOGO)

The FDA cleared the SpectraShield as a single-use, N95 surgical respirator for use in health care settings by health care personnel to protect against microorganisms, body fluids and particulate material.

Data from laboratory tests demonstrated that the respirator is effective against the following bacteria: Streptococcus pyogenes, Methicillin-resistant Staphylococcus aureus, also called MRSA, and Haemophilus influenzae.

"The SpectraShield 9500 N95 anti-bacterial surgical respirator may reduce the risk of exposure to specific bacterial agents during medical emergencies," said Elizabeth Claverie-Williams, branch chief of Infection Control Devices at the FDA's Center for Devices and Radiological Health.

N95 surgical respirators are different than regular facemasks, which are designed to help block large-particle droplets, splashes, sprays, or splatter that may contain viruses and bacteria from reaching the mouth and nose.

While a regular facemask may be effective in blocking splashes and large-particle droplets, it does not filter or block tiny particles that may be transmitted by coughs, sneezes, or certain medical procedures. Regular facemasks also do not provide complete protection from germs and other contaminants because of the loose fit between the surface and the face.

The N95 designation means that the respirator blocks at least 95 percent of very small particles when subjected to careful testing. If properly fitted, the capabilities of N95 respirators exceed those of regular facemasks. Even a

'/>"/>

SOURCE

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading