This is a brief overview of information related to FDA’s approval to market this product. See the links below to the Summary of Safety and Effectiveness Data (SSED) and product labeling for more complete information on this product, its indications for use, and the basis for FDA’s approval.
Product Name: XIENCE nano™ Everolimus Eluting Coronary Stent System
PMA Applicant: Abbott Vascular
Address: 3200 Lakeside Drive, Santa Clara, CA 95054
Approval Date: May 24, 2011
Approval Letter: A link to web for the approval letter TBA
What is it? The XIENCE nano stent is a metal stent with the drug everolimus contained in a thin coating on the stent’s surface. The XIENCE nano stent is mounted on a folded balloon attached to a catheter delivery system for placement into a coronary artery (blood vessel supplying blood to the heart). The stent is made of a cobalt-chromium metal alloy. The XIENCE nano stent is a smaller size of the approved XIENCE V stent and was designed to treat smaller coronary arteries than the XIENCE V stent.
How does it work?
- A catheter with a small balloon mounted on the end is inserted into a blood vessel in the groin or arm and advanced into a coronary artery.
- The catheter is then positioned at the narrowed portion of the artery and the balloon is inflated. As the balloon inflates, it stretches the coronary artery wall and compresses the plaque (a procedure known as balloon angioplasty).
- The balloon is then deflated, and the catheter is removed from the artery.
- The XIENCE nano stent delivery catheter is then positioned at the narrowing of the coronary artery. The balloon on the stent delivery catheter is inflated which expands the stent and presses it against the coronary artery wall. This may be followed by repeat balloon inflations within the stent to achieve the desired stent expansion.
- The stent remains permanently implanted within the coronary artery to help keep the artery open.
- The drug (everolimus) is released over time into the artery wall around the stent to help prevent the vessel from re-narrowing.
When is it used? The XIENCE nano stent is used in patients who have a narrowing in their coronary arteries caused by coronary artery disease – a condition that occurs when the arteries that supply oxygen-rich blood and nutrients to the heart muscle become narrowed or blocked by a gradual build-up of “plaque.” Plaque is made up of fatty deposits (cholesterol), white blood cells, calcium, and other substances that collect over time in the coronary artery wall. If these arteries become blocked or narrowed, treatment may be required to improve blood flow and increase the supply of oxygen to the heart.
The XIENCE nano stent is used in patients who have narrowing in small coronary arteries that are greater than or equal to 2.25 mm to less than or equal to 2.50 mm in diameter and where the affected length of the artery is less than or equal to 28 mm long.
What will it accomplish? A significantly narrowed coronary artery limits blood flow to the heart muscle and can cause chest pain (angina). Placement of the XIENCE nano stent within the narrowed coronary artery improves blood flow. After a coronary artery stent is implanted, re-narrowing of the artery may occur. The drug (everolimus) is released over time from the XIENCE nano stent surface into the adjacent artery wall to help prevent re-narrowing of the vessel.
When should it not be used? The XIENCE nano Everolimus Eluting Coronary Stent System should not be used in patients who:
- cannot receive antiplatelet and/or anti-coagulant therapy.
- have a lesion that prevents complete angioplasty balloon inflation, or proper placement of the stent.
- have known hypersensitivity or contraindication to everolimus or structurally-related compounds, cobalt, chromium, nickel, tungsten, acrylic polymers, or fluoropolymers.
Additional information: Summary of Safety and Effectiveness and labeling are available online.