New HydraSolveT Lipoplasty System launched at American Society of Aesthetic Plastic Surgery Meeting
Andrew Technologies, LLC launched the HydraSolveT Lipoplasty System today at the American Society of Aesthetic Plastic Surgery (ASAPS) in Vancouver, BC. ASAPS is the leading plastic surgery medical conference for surgeons focused on aesthetic body contouring and is attended by approximately 3,000 plastic surgeons.
(Photo: http://photos.prnewswire.com/prnh/20120504/NY98979 ) HydraSolveT is an FDA-cleared liposuction device based on the same patented Tissue Liquefaction TechnologyT that was launched in 2003 by Alcon as the AquaLase@ Liquefaction Device for precision cataract surgery. HydraSolveT combines natural saline solution with low levels of pressure and temperature, to liquefy only targeted fat tissue.
Because fat tissue is liquefied, the cutting of fat by forceful thrusts of the cannula is no longer required. The specially designed HydraSolveT cannula is manufactured with aperture edges that have a rounded radius of curvature that do not cut tissue. It is the energized saline stream, inside the cannula, that liquefies targeted fat tissue while not damaging or cutting blood vessels, nerves or connective tissue. HydraSolveT achieves liquefaction of fat tissue by cell disaggregation, not by the lysing of cell membranes.
The HydraSolveT system is displayed at booth #333. There is also a Hot Topics presentation today by Dr. Richard D'Amico (past-President of ASPS) where Dr. D'Amico will highlight his clinical experiences with HydraSolve. Additionally, Andrew Technologies has submitted two e-Posters. Scientific poster # 5266 provides data from the safety studies supporting our FDA clearance, Scientific poster # 5233 provides results of the largest consumer survey ever reported in Lipoplasty with 21,509 respondents.
Since the 2010 FDA clearance of HydraSolveT, Andrew Technologies has been engaged in clinical development of the device with several leading Plastic Surgeons to demonstrate the full potential of HydraSolve in over 50 patient cases. According to Dr. Richard D'Amico of Englewood, N.J., "It is clearly more efficient and my opinion is that it is less traumatic and may result in less blood loss for a given amount of lipoaspirate." Dr. Christopher Godek of Toms River, NJ, and President of the NJ Society of Plastic Surgery, has contributed to the development of the HydraSolveT technology since its inception and observed that "HydraSolveT provides faster, smoother fat extraction for the surgeon, with a quicker recovery for patients." Dr. David Abramson, another expert plastic surgeon in New York and New Jersey has more recently started using HydraSolve and added, "With the first patient I treated, on her first post-op visit I had to actively search for some bruising and almost didn't find any." Dr. Mark S. Andrew, who co-invented HydraSolveT and related technologies, is now Chief Scientific Officer of Andrew Technologies and has been directly involved with all of the research and development of HydraSolveT. According to Dr. Andrew, "HydraSolveT is better for patients because it is gentle and tissue-friendly; it's better for surgeons because it gives them excellent control and precision in removing fat, and it also reduces their physical exertion." About HydraSolve Lipoplasty System HydraSolveT Lipoplasty System is an all-American technology. It was invented in New Jersey, designed in Virginia by MPR Associates http://www.mpr.com/ , and manufactured in Ohio and Massachusetts by Sparton Medical http://www.sparton.com/strategic-business-units/medical/ and STD Medical http://www.stdmed.com/ . We anticipate that HydraSolveT will be very successful in the US launch, and in the key export markets of Europe, Asia, and South America.
About Andrew Technologies, LLC Andrew Technologies, founded in 2007, is a medical technology company committed to improving patients' lives through body aesthetics. Andrew Technologies is a venture capital funded company that will be based in Orange County, CA. Our primary investors are WFD Ventures and the New Jersey Technology Council.
About MPR Associates MPR is a fully integrated product development, engineering, and industrial design company specializing in turn-key product development services in life sciences industries for companies manufacturing medical devices, diagnostics, laboratory instruments, and pharmaceuticals. We handle all aspects of product development from industrial design, mechanical and electrical design, software development, and V&V activities to rapidly prototype full systems, fabricate units for clinical trials and pilot manufacturing, and manage technology transfer activities to manufacturers for full-scale production.
About Sparton Medical Sparton Medical's operations are comprised of contract development, design, production and fulfillment of complex and sophisticated medical class I, class II, and class III devices in its FDA registered and ISO 13485 certified facilities. We assure product reliability and safety in accordance with Food and Drug Administration ("FDA") guidelines and GMP manufacturing procedures for each product we design and manufacture. Sparton Medical specializes in systems and procedures that meet the requirements of medical OEM and emerging technology customers in the In Vitro Diagnostic Therapeutic and Surgical Devices market segments.
About STD Med STD Med is a full service contract manufacturer and developer of medical devices and precision machine components. Having been in business since 1953, this privately held company began its history as Stoughton Tool and Die. Later named STD Manufacturing, the company's core competency was in machining for the Aerospace, Defense and Commercial Industries. In 1990 STD's vision changed as it began its transition into the Medical Device Industry. As a result, the company renamed itself and STD Med emerged. Housed in several facilities, totaling over 150 thousand square feet, STD Med is vertically integrated, offering complete supply chain management and providing a single point of contact for its customers.
SOURCE Andrew Technologies, LLC -0- 05/04/2012 /CONTACT: Brian Lenehan, +1-215-990-0754, email@example.com /Photo: http://photos.prnewswire.com/prnh/20120504/NY98979 PRN Photo Desk, firstname.lastname@example.org CO: Andrew Technologies, LLC; MPR Associates; Sparton Medical; STD Med; American Society of Aesthetic Plastic Surgery (ASAPS) ST: California British Columbia IN: MTC BIO HEA SU: TDS PRN -- NY98979 -- 0000 05/04/2012 12:00:00 EDT http://www.prnewswire.c