SMD Isotropic Antenna for NFC Applications
In the last few years, communication technology by Near Field Communications (NFC) has experienced a lot of improvements. New tablets, smart phones, etc., has been announced with this NFC functionality for E-Wallet  application.
The antenna has a high surface resistance NiZn ferrite core material (>10Mohm/mm) and low initial permeability to work at high frequency. This provide a very stable performance in a wide range of temperature (-40ºC to +85ºC). This series has the same format as 3DC15 (125kHz) transponder family and they can be provide with same mechanical performance: label, cap and/or foam.
3DC15-HF  is offered with 3, 6, 9, 18 and 60uH inductance values. You can use all previous inductance value independent or combine them to produce the standard inductance values of 1, 2, 3, 6 and 20uH connecting the 3 axes in parallel.
Its Surface Mounting Device (SMD) configuration allows an easy integration in an automatic printed circuit board assembly process (lead-free reflow), avoiding handling of the piece that could damage winding wire of the piece.
PREMO NFC antennas also include SDTR1103-HF family. PREMO has recently enhanced this family with new inductance values from 1 to 20uH.
SDTR1103 and 3DC15 series meets the AEC-Q-200 (one of the most restrictive quality standards for electric components) in automotive applications. This implies a guarantee and security in the performance of the component in applications for both domestic and industrial environments.
This Super Drop Test Resistance coil (SDTR1103-HF2) and 3DC15-HF (in its foam version) are especially suitable for applications which require high (drop-tests)  requirements, like mobiles and key-fobs, etc.
The inductance and “Q” factor has been measured at 13.56MHz and are suitable for RFID applications with ISO15693 (vicinity: I-CODE) and ISO 14443 (proximity: MIFARE) interface.