Electrically Conductive, Silver Filled Adhesive is USP Class VI Approved
This silver-filled epoxy adhesive/sealant has remarkable electrical conductivity with a volume resistivity less than 0.001 ohm cm. Serviceable over the wide temperature range of -60°F to 400°F, EP3HTSMED is resistant to severe thermal cycling and many chemicals including water, fuels, oil, and most organic solvents.
EP3HTSMED is a thixotropic paste and has a specific gravity of 2.90 at 77°F. It requires no mixing and needs only contact pressure during a simple heat cure of 20 to 40 minutes at 300°F or 40 to 90 minutes at 250°F. With minimal shrinkage during cure and a Shore D hardness of 60 to 80, EP3HTSMED bonds well to a variety of substrates including metals, glass, vulcanized rubbers, ceramics, and many plastics.
Silver in color, this one component adhesive is packaged in syringes or glass jars. EP3HTSMED has a shelf life of 6 months in a glass jar and a shelf life 3 months when stored in a syringe at room temperature.
Master Bond EP3HTSMED offers exceptional thermal and electrical conductivity while fully meeting USP Class VI requirements. This no mix epoxy adhesive has versatile, rapid cure schedules. Read more about Master Bond's electrically conductive adhesives at http://www.masterbond.com/properties/electrically-conductive-adhesive-systems  or contact Master Bond's Technical Support Team by phone at +1-201-343-8983, by fax at +1-201-343-2132 or by e-mail at email@example.com .
MASTER BOND INC.
201-343-8983; www.masterbond.com