Advertisement
UV-or Light-Cure

Soft Light-Curable Adhesive

March 19, 2014 8:41 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

Cyclic olefin polymers/copolymers have become popular choices in the point-of-care device industry because of their many advantages including high strength, hardness, low water absorption, and excellent biocompatibility...

LISTED UNDER: UV-or Light-Cure | Cyclic Olefin Copolymer (COC) | Cyclo-olefin Polymer
Advertisement

Catheter Adhesive Provides Easy Cure Confirmation and Post-Cure Inspection

January 27, 2014 3:06 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

212-CTH-UR-SC is the latest in a series of Dymax adhesives to be formulated with both Ultra-Red and patented See-Cure technologies. It’s designed for use in catheter assembly and offers excellent bond strength to a variety of substrates including platinum and polycarbonate...

LISTED UNDER: UV-or Light-Cure

New Needle-Bonding Adhesives Cure Fast for Increased Throughput

June 10, 2013 5:16 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

A new family of LED-curable needle-bonding adhesives from Dymax has been formulated to cure at speeds typically associated with today’s best automation equipment and line speeds. Typical cure time for the 1400 series is 2.5 seconds or less, allowing for increased production speed and throughput, lower processing costs...

LISTED UNDER: UV-or Light-Cure

Light-Curable Needle-Bonding Adhesive Eliminates Secondary Processing

February 26, 2013 10:44 am | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s MD 1193-M-SV05, a new, multipurpose medical-device adhesive, cures tack free quickly upon exposure to UV and/or visible light, eliminating the need for heat or secondary moisture cure on high-speed assembly lines.

LISTED UNDER: UV-or Light-Cure

Website Helps Visitors Discover LED Light-Curing Technology

October 23, 2012 2:40 pm | Dymax Corporation | Product Releases | Comments

Dymax Corporation has launched a new website that outlines the benefits of LED light-curing technology. Site visitors will find detailed product information for a variety of Dymax LED-curable materials...

LISTED UNDER: Adhesive-Curing Systems | UV-or Light-Cure

EP3HTMed

September 6, 2012 1:11 pm | Master Bond, Inc. | Products

Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, ETO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of –60°F to +400°F, is 100% reactive and does not contain any diluents or solvents. Another benefit of this single component, no mix epoxy adhesive is its unlimited working life.

LISTED UNDER: Class VI-Compliant | Epoxy | UV-or Light-Cure

MasterSil 151MED

September 6, 2012 12:57 pm | Master Bond, Inc. | Products

MasterSil 151Med is an optically clear, flexible, tough, high performance potting and encapsulation compound introduced by Master Bond. It exhibits superior electrical insulation properties and very low shrinkage upon cure. MasterSil 151 MED is resistant to vibration and shock and has a service operating temperature range of –65°F to +400°F. It meets USP Class VI requirements for medical applications.

LISTED UNDER: Class VI-Compliant | Silicone | UV-or Light-Cure

UV18MED

September 6, 2012 10:54 am | Master Bond, Inc. | Products

Fast curing UV18Med is a new single component adhesive/sealant that meets USP Class VI specifications for medical applications. UV18Med offers durable, flexible bonds and superior resistance to water and chemicals. It has a Shore D hardness of 55-60 and an elongation of less than 35%. It adheres well to a wide range of substrates including metals, glass and most plastics. Shrinkage upon cure is substantially less than conventional UV cure systems.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure

LED403Med

September 6, 2012 10:47 am | Master Bond, Inc. | Products

Master Bond LED403Med requires no mixing and will cure rapidly, with the speed of cure dependent upon the intensity of the light, the thickness of the layer and the distance of the light source from the material being cured. LED403Med can cure in sections up to and beyond 1/8 inch thick upon exposure to the LED light. In thinner sections, full cures can be achieved in 15-30 seconds (sometimes less than that), while thicker sections require longer cure times. Environmentally friendly, this compound is solvent free.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure

Light Cure System for Adhesives

May 31, 2011 6:54 am | Product Releases | Comments

Henkel will feature its latest innovation at MD&M East. Loctite AssureCure, a revolutionary new technology that quantitatively and cost-effectively assesses the degree of cure of light cure adhesives.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Light Cure Adhesive Fluoresces Red for Easy On-Part Detection

November 29, 2010 6:10 am | Product Releases | Comments

For medical device and industrial assembly applications, Henkel Corp. has introduced Loctite 3979 light cure adhesive—a translucent, non-sagging gel formulation designed to fill moderate gaps without migrating beyond its intended location.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Toughened, Light Cure Adhesives for Medical Device Bonding

November 10, 2010 6:30 am | Product Releases | Comments

Loctite 4310 and 4311 Flashcure light cure instant adhesives cure tack-free in just two to five seconds upon exposure to low-intensity UV/visible light.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Toughened, Light Cure Adhesives Bond Instantly to a Wide Variety of Substrates

June 2, 2010 6:04 am | Product Releases | Comments

For bonding applications that must withstand impact or flexing, Henkel Corp. has introduced two Loctite Flashcure light cure cyanoacrylate instant adhesives.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Spot Curing System Offers Flexibility

April 6, 2010 5:08 am | Product Releases | Comments

Utilizing the latest in UV LED technology, this spot curing system provides a peak irradiance of 9,500 mW/cm², with a lifetime of over 20,000 hours. It offers the ability to control up to four UV LED heads simultaneously with a single connection or independently.

LISTED UNDER: UV-or Light-Cure

Spot Curing System Offers Flexibility in UV Assembly Applications

February 5, 2010 10:55 am | Product Releases | Comments

EXFO Photonic Solutions (MD&M West Booth 2209) has introduced the OmniCure LX400 UV LED Spot Curing System, which utilizes the highest power and most reliable LED technology in one of the smallest form factors currently available for UV adhesive curing.

LISTED UNDER: UV-or Light-Cure

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading