Advertisement
UV-or Light-Cure

Medium Viscosity, UV/Visible Light Curing Cyanoacrylate Adhesive

October 24, 2014 12:02 pm | by MDT Staff | Ellsworth Adhesives | Product Releases | Comments

Presented by Ellsworth Adhesives, Henkel Loctite 4311™ Flashcure® is a light yellow-green, medium viscosity, UV/visible light curing cyanoacrylate adhesive designed for bonding applications that require very rapid fixturing, fillet cure or surface cure. Its UV/light cure properties assist in rapid curing of exposed surface areas, minimizing blooming and providing an alternative to using...

LISTED UNDER: Cyanoacrylate | UV-or Light-Cure

LED-Curable Catheter Adhesive

October 13, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dymax Corporation has introduced MD 215-CTH-UR-SC, an LED-curable adhesive designed for bonding and assembly of next-generation catheter designs using Nylon 12 and PEBA. Formulated with new Encompass technology that combines Dymax exclusive...

LISTED UNDER: UV-or Light-Cure

Innovative, Light-Curable Adhesives

June 10, 2014 11:54 pm | by MDT Staff | Product Releases | Comments

Dymax will exhibit in Booth #1557 at MD&M East, scheduled to take place June 10-12, 2014 at the Jacob Javits Center in New York. With over 30 years of direct participation...

LISTED UNDER: UV-or Light-Cure
Advertisement

UV Curable System

April 30, 2014 8:10 am | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Specially formulated to optimize bond strength, Master Bond, Inc.'s UV15-42C is a UV curable system for bonding, sealing and coating applications. This smooth paste can be applied vertically without sagging. As an optically clear compound...

LISTED UNDER: UV-or Light-Cure

Soft Light-Curable Adhesive

March 19, 2014 8:41 pm | by MDT Staff | Product Releases | Comments

Cyclic olefin polymers/copolymers have become popular choices in the point-of-care device industry because of their many advantages including high strength, hardness, low water absorption, and excellent biocompatibility...

LISTED UNDER: UV-or Light-Cure | Cyclic Olefin Copolymer (COC) | Cyclo-olefin Polymer

Catheter Adhesive Provides Easy Cure Confirmation and Post-Cure Inspection

January 27, 2014 3:06 pm | by MDT Staff | Product Releases | Comments

212-CTH-UR-SC is the latest in a series of Dymax adhesives to be formulated with both Ultra-Red and patented See-Cure technologies. It’s designed for use in catheter assembly and offers excellent bond strength to a variety of substrates including platinum and polycarbonate...

LISTED UNDER: UV-or Light-Cure

New Needle-Bonding Adhesives Cure Fast for Increased Throughput

June 10, 2013 5:16 pm | by MDT Staff | Product Releases | Comments

A new family of LED-curable needle-bonding adhesives from Dymax has been formulated to cure at speeds typically associated with today’s best automation equipment and line speeds. Typical cure time for the 1400 series is 2.5 seconds or less, allowing for increased production speed and throughput, lower processing costs...

LISTED UNDER: UV-or Light-Cure

Light-Curable Needle-Bonding Adhesive Eliminates Secondary Processing

February 26, 2013 10:44 am | by MDT Staff | Product Releases | Comments

Dymax Corporation’s MD 1193-M-SV05, a new, multipurpose medical-device adhesive, cures tack free quickly upon exposure to UV and/or visible light, eliminating the need for heat or secondary moisture cure on high-speed assembly lines.

LISTED UNDER: UV-or Light-Cure
Advertisement

Website Helps Visitors Discover LED Light-Curing Technology

October 23, 2012 2:40 pm | Product Releases | Comments

Dymax Corporation has launched a new website that outlines the benefits of LED light-curing technology. Site visitors will find detailed product information for a variety of Dymax LED-curable materials...

LISTED UNDER: Adhesive-Curing Systems | UV-or Light-Cure

EP3HTMed

September 6, 2012 1:11 pm | Master Bond, Inc. | Products

Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, ETO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of –60°F to +400°F, is 100% reactive and does not contain any diluents or solvents. Another benefit of this single component, no mix epoxy adhesive is its unlimited working life.

LISTED UNDER: Class VI-Compliant | Epoxy | UV-or Light-Cure

MasterSil 151MED

September 6, 2012 12:57 pm | Master Bond, Inc. | Products

MasterSil 151Med is an optically clear, flexible, tough, high performance potting and encapsulation compound introduced by Master Bond. It exhibits superior electrical insulation properties and very low shrinkage upon cure. MasterSil 151 MED is resistant to vibration and shock and has a service operating temperature range of –65°F to +400°F. It meets USP Class VI requirements for medical applications.

LISTED UNDER: Class VI-Compliant | Silicone | UV-or Light-Cure

UV18MED

September 6, 2012 10:54 am | Master Bond, Inc. | Products

Fast curing UV18Med is a new single component adhesive/sealant that meets USP Class VI specifications for medical applications. UV18Med offers durable, flexible bonds and superior resistance to water and chemicals. It has a Shore D hardness of 55-60 and an elongation of less than 35%. It adheres well to a wide range of substrates including metals, glass and most plastics. Shrinkage upon cure is substantially less than conventional UV cure systems.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure

LED403Med

September 6, 2012 10:47 am | Master Bond, Inc. | Products

Master Bond LED403Med requires no mixing and will cure rapidly, with the speed of cure dependent upon the intensity of the light, the thickness of the layer and the distance of the light source from the material being cured. LED403Med can cure in sections up to and beyond 1/8 inch thick upon exposure to the LED light. In thinner sections, full cures can be achieved in 15-30 seconds (sometimes less than that), while thicker sections require longer cure times. Environmentally friendly, this compound is solvent free.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure

Light Cure System for Adhesives

May 31, 2011 6:54 am | Product Releases | Comments

Henkel will feature its latest innovation at MD&M East. Loctite AssureCure, a revolutionary new technology that quantitatively and cost-effectively assesses the degree of cure of light cure adhesives.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Light Cure Adhesive Fluoresces Red for Easy On-Part Detection

November 29, 2010 6:10 am | Product Releases | Comments

For medical device and industrial assembly applications, Henkel Corp. has introduced Loctite 3979 light cure adhesive—a translucent, non-sagging gel formulation designed to fill moderate gaps without migrating beyond its intended location.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading