UV-or Light-Cure

Light-Curable Needle-Bonding Adhesive Eliminates Secondary Processing

February 26, 2013 10:44 am | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s MD 1193-M-SV05, a new, multipurpose medical-device adhesive, cures tack free quickly upon exposure to UV and/or visible light, eliminating the need for heat or secondary moisture cure on high-speed assembly lines.

LISTED UNDER: UV-or Light-Cure

Website Helps Visitors Discover LED Light-Curing Technology

October 23, 2012 2:40 pm | Dymax Corporation | Product Releases | Comments

Dymax Corporation has launched a new website that outlines the benefits of LED light-curing technology. Site visitors will find detailed product information for a variety of Dymax LED-curable materials...

LISTED UNDER: Adhesive-Curing Systems | UV-or Light-Cure

Light Cure System for Adhesives

May 31, 2011 6:54 am | Product Releases | Comments

Henkel will feature its latest innovation at MD&M East. Loctite AssureCure, a revolutionary new technology that quantitatively and cost-effectively assesses the degree of cure of light cure adhesives.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Light Cure Adhesive Fluoresces Red for Easy On-Part Detection

November 29, 2010 6:10 am | Product Releases | Comments

For medical device and industrial assembly applications, Henkel Corp. has introduced Loctite 3979 light cure adhesive—a translucent, non-sagging gel formulation designed to fill moderate gaps without migrating beyond its intended location.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Toughened, Light Cure Adhesives for Medical Device Bonding

November 10, 2010 6:30 am | Product Releases | Comments

Loctite 4310 and 4311 Flashcure light cure instant adhesives cure tack-free in just two to five seconds upon exposure to low-intensity UV/visible light.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Toughened, Light Cure Adhesives Bond Instantly to a Wide Variety of Substrates

June 2, 2010 6:04 am | Product Releases | Comments

For bonding applications that must withstand impact or flexing, Henkel Corp. has introduced two Loctite Flashcure light cure cyanoacrylate instant adhesives.

LISTED UNDER: Lamps and Lights | UV-or Light-Cure

Spot Curing System Offers Flexibility

April 6, 2010 5:08 am | Product Releases | Comments

Utilizing the latest in UV LED technology, this spot curing system provides a peak irradiance of 9,500 mW/cm², with a lifetime of over 20,000 hours. It offers the ability to control up to four UV LED heads simultaneously with a single connection or independently.

LISTED UNDER: UV-or Light-Cure

The Quest to Replace Plasticized PVC Tubes

March 23, 2010 9:58 am | by Kyle Rhodes, Nadine Blaesing, and Rory Wolf | Dymax Corporation | Articles | Comments

There is a growing interest within the medical device community to replace plasticized PVC tubing with more environmentally friendly and less potentially harmful alternatives. However, bonding these different materials for traditional applications can prove challenging.

LISTED UNDER: UV-or Light-Cure | Biocompatibility Testing | Microbiology/Chemical Testing

Spot Curing System Offers Flexibility in UV Assembly Applications

February 5, 2010 10:55 am | Product Releases | Comments

EXFO Photonic Solutions (MD&M West Booth 2209) has introduced the OmniCure LX400 UV LED Spot Curing System, which utilizes the highest power and most reliable LED technology in one of the smallest form factors currently available for UV adhesive curing.

LISTED UNDER: UV-or Light-Cure

Adhesive Pairs with LED Lamp for Fast Medical Device Assembly

January 22, 2010 10:59 am | Product Releases | Comments

The 1020-M Ultra Light-Weld is an ultra-fast, tack-free, LED-curable adhesive. It's designed for rapid bonding of a wide variety of plastics typically used in the manufacture of medical devices, such as reservoirs, tube sets, port fittings, drug delivery systems, and heat-sensitive applications.

LISTED UNDER: UV-or Light-Cure | Fittings

UV Cure Adhesive With Bond Strength

September 8, 2009 12:51 pm | Master Bond, Inc. | Product Releases | Comments

Master Bond adds a strength advantage to a UV adhesive compound combining high strength bonds with the well established benefits of UV cure: high productivity, improved performance, and environmental compliance.

LISTED UNDER: UV-or Light-Cure

Flexible Adhesive Changes Colors as it Cures

August 28, 2009 12:02 pm | Product Releases | Comments

The See-Cure 1201-M-SC is a medical grade flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics. It cures in seconds when exposed to high-intensity UV/visible light, enabling faster processing, greater output, and lower assembly costs.

LISTED UNDER: UV-or Light-Cure

Calibrator Simulates Voltage and Thermocouple Readings

August 28, 2009 12:02 pm | E Instruments Group, Llc | Product Releases | Comments

The SignalCal 2 T/C is a compact, lightweight, and easy-to-use hand-held calibrator that simulates both voltage and thermocouple readings. It is built rugged and ships with a holster and calibration certificate included.

LISTED UNDER: UV-or Light-Cure

Medical Adhesives Selector Guide

April 2, 2009 5:33 am | Product Releases | Comments

Dymax Corp. offers an enhanced version of their comprehensive Selector Guide on MD Adhesives for Medical Device Assembly. This guide is a valuable tool containing a number of charts intended to help R&D engineers and product designers choose the appropriate adhesive for their application.

LISTED UNDER: UV-or Light-Cure | Product Design | Product R&D