Advertisement
Equipment/Tools

Precision Medical Machining at MD&M West 2015

November 19, 2014 1:08 pm | by Gf Agie Charmilles | GF Agie Charmilles | Product Releases | Comments

GF Machining Solutions will demonstrate the precision, performance and efficiency of milling and EDM systems designed with medical machining applications in mind at MD&M 2015 on Feb. 10 – 12 at the Anaheim Convention Center, Anaheim, California. Visitors to the company’s show booth 4161 will experience the Mikron HSM 200U LP (linear performance) milling...

LISTED UNDER: Machining Centers | Wire, EDM

Maintenance-Free Venturi Vacuum Pump

November 6, 2014 2:46 pm | by Vaccon Company | Vaccon Company | Product Releases | Comments

Vaccon’s RTM series vacuum cartridges and pumps, ideally suited for the packaging industry, replace failed or clogged multi-stage pumps to maximize productivity and minimize downtime. Unlike multi-stage cartridges, Vaccon’s single stage cartridges allow dirt, dust and debris to pass through the pump without clogging. RTM cartridges thread directly into existing multi-stage vacuum pumps and...

LISTED UNDER: Extrusion Equipment | Machining Equipment & Tools | 3D Scanning

48-series lasers

September 30, 2014 4:52 pm | Synrad, Inc. | Products

Synrad’s original “all-metal” tube technology opened the door for sealed CO2 lasers in many industrial applications. After 20 years, it remains the industry standard for performance, reliability, long lifetime and low cost. The laser tube is a rigid box structure design that provides an ultra-stable platform for the laser resonator. Synrad’s 48-series tubes are mounted into an H-shaped heat sink extrusion that also serves as the chassis for the drive electronics. This guarantees that the laser will withstand the harsh requirements of modern industrial environments

LISTED UNDER: Laser Micro-Machining
Advertisement

Test Strip Cutter from Rolls

August 28, 2014 10:46 am | AZCO Corp. | Products

This application requires cutting diagnostic strips from rolls into individual pieces. The material is loaded onto a cantilevered unwind. After being unwound, the web travels through a dance assembly. The roll feed pushes the material into the knife assembly. The material can be indexed based on either dimensions or a registration mark on the material. The knife assembly shears the material. There is a spring loaded material guide to place the strip onto the conveyor. The entire assembly is mounted on a ½” thick anodized aluminum base plate with the control box mounted perpendicularly to the base plate.

LISTED UNDER: Converting Equipment

Test Strip Cutter from Sheets

August 28, 2014 10:35 am | AZCO Corp. | Products

AZCO’S test strip cutter is an automated two step system in which a diagnostic sheet is cut into individual pieces. The sheet is placed onto an in-feed station where it is cut into individual cards. The cutting station has rotary shear cut blades driven by a variable speed motor. The individual cards go over driven rollers which help guide the cards onto a shingled table, and conveyor belts index the cards into the second cutting station where the cards are cut into 6mm strips.

LISTED UNDER: Converting Equipment

Tubing Cutter

August 28, 2014 9:48 am | AZCO Corp. | Products

Our bench top tubing cutter is ideal for your tube processing. The tubing is indexed by a dual driver tractor belt system for high accuracy. For easy operator use, the stepper drive is controlled by the color touch screen; simply enter the length and number of pieces. It is ideal for the tubing material to have a diameter of up to 25 mm/1” and a length between 0.25 mm/0.01” to 25 m/999”. All stainless steel covers with a lexan guard include a safety interlock. Blades are disposable and are easy to change without the need for tools. Plugs into a 110 V AC and requires 40 psi compressed air.

LISTED UNDER: Converting Equipment | Tubing-Processing Equipment

Slide Forming Machinery

August 14, 2014 12:12 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | Comments

Connecticut Spring & Stamping announced that it offers accurate, repeatable and powerful slide forming machinery, ideal for economical production of intricate springs, stampings, and wire forms...

LISTED UNDER: Equipment/Tools | Machining Equipment & Tools

Two Moving Jaws

June 26, 2014 11:14 pm | by MDT Staff | Product Releases | Comments

Northfield Precision Instrument has introduced their Model 870 Sliding-Jaw Air Chuck (.0001 TIR). This air-actuated chuck has two moving jaws for gripping square or rectangular parts...

LISTED UNDER: Machining Equipment & Tools | Precision Air Chucks
Advertisement

Vertical LSR Molding Machine Cold Deck System

June 4, 2014 7:18 pm | by MDT Staff | Product Releases | Comments

Rogan has purchased and added a new cold deck system to its vertical Sodick Plustech Liquid Silicone Rubber molding machine...  

LISTED UNDER: Molding Equipment

Haas CNC Vertical Machining Centers

May 20, 2014 7:44 pm | Haas Automation Inc. | Products

Haas Automation offers a complete line of high-quality, high-value CNC vertical machining centers (VMCs) to meet the needs of any shop. Machines range from the diminutive Office Mill to the massive VF-12, with nearly 60 models in between. Haas VMCs feature high-performance vector drive spindles, high-torque brushless servos on all axes, and rigid cast-iron construction. Configurations range from 40- and 50-taper gear-driven models for high-torque, heavy cutting, to Super Speed models with inline direct-drive spindles to handle the most demanding high-speed machining operations.

LISTED UNDER: Machining Centers

Haas Rotary Tables & Indexers

May 20, 2014 7:40 pm | Haas Automation Inc. | Products

Haas Autoomation offers more than 35 models of rotary tables and indexers, delivering the superior quality and indexing accuracy that have made Haas the industry benchmark. The full line of Haas rotary products includes many specialized units designed for maximum productivity. From the multi-head HA5Cs to tilting T5Cs and dual-axis trunnion models, Haas continues to lead the way to higher productivity through automation. Haas rotary products are built from top-quality materials, and undergo constant re-engineering and refinement to offer only state-of-the-art technology. Constructed of heavy-duty materials and designed for dependable day-in, day-out operation, Haas rotary products are the benchmark by which all others are measured.

LISTED UNDER: Machining Centers

Haas CNC Turning Centers

May 20, 2014 7:28 pm | Haas Automation Inc. | Products

Haas Automation's complete line of CNC turning centers is designed to meet the needs of modern machine shops, now and long into the future. The machines offer a wide range of capacities, including Big Bore versions that increase power and capacity while retaining the original footprint. Dual-spindle models and Y-axis capability boost production and reduce setups for "done-in-one" machining; and our series of Toolroom Lathes expands the product line – and the possibilities – still further.

LISTED UNDER: Turning Machines

Haas CNC Horizontal Machining Centers

May 20, 2014 7:24 pm | Haas Automation Inc. | Products

The Haas Automation line of CNC horizontal machining centers offers a wide selection of rigid and powerful machines for every application – every model designed and built to the exacting standards set by Gene Haas. These rugged machines have the power to cut alloy steels, stainless steels, cast iron and high-nickel alloys, yet also provide the speed necessary for aluminum alloys.

LISTED UNDER: Machining Centers

Multitasking Turning Center

May 8, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Methods Machine Tools, Inc., a leading supplier of innovative precision machine tools, automation and accessories, has introduced the Nakamura-Tome AS-200 High Performance Multitasking Turning Center featuring a single spindle...

LISTED UNDER: Machining Centers | Turning Machines

All-Laser Manufacturing Solutions

May 8, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Raydiance, a provider of all-laser manufacturing solutions, today announced the R-Drill, R-Tube and R-Mill, to address micromachining challenges in the automotive, industrial and medical device industries. Ready to integrate into customer...

LISTED UNDER: Laser Micro-Machining | Machining Centers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading