Advertisement

Laser Machine Tools Optimized for Medical Device Manufacturers

May 8, 2009 12:19 pm | Control Micro Systems, Inc. | Product Releases | Comments

A line of turnkey laser tools provide marking, cutting, welding, drilling, and scribing processes optimized to the unique requirements of medical device manufacturers. They use lasers spanning the entire light spectrum in both high average power and high peak power configurations.

LISTED UNDER: Laser Micro-Machining

Swager Reduces Production Costs With Automated Batch Processing

May 8, 2009 4:58 am | Product Releases | Comments

The SW575S automated marker band swaging equipment is intended to reduce production costs with automated batch processing. This machine automatically positions and swages marker bands within tight manufacturing tolerances.

LISTED UNDER: Machining Centers

Miniature Solid Carbide Thread Mills Offered for Difficult Materials

March 23, 2009 11:59 am | Product Releases | Comments

This series of miniature solid carbide thread mills are optimally designed for easy machining of difficult materials such as stainless steels, titanium, K-monel, hastelloy, and inconel. The line is suitable for a variety of applications including those in the medical industries.

LISTED UNDER: Machining Equipment & Tools
Advertisement

Integrated Linear/Rotary Laser Machining Platforms

March 17, 2009 11:15 am | Product Releases | Comments

The LaserTurn 1 is an integrated linear-rotary motion subsystem that combines automated material handling with high performance direct-drive linear and rotary motion to provide the highest throughput, highest accuracy, cylindrical laser processing system available.

LISTED UNDER: Laser Micro-Machining | Laser Machining

Extrusion Tooling Brochure

March 17, 2009 11:13 am | Product Releases | Comments

Brochure describes B&H Tool Company's engineering, production, and technical support for companies who use extrusion tooling, including adjustable center, fixed center, and multi-layer crossheads, as well as in-line die assemblies.

LISTED UNDER: Extrusion Equipment | Wire and Cable

Coating Enables Higher Speed Machining

September 15, 2008 5:44 am | Product Releases | Comments

Featuring a Super ZX multi-layered coating, the new grades AC510U and AC520U are perfect for roughing, finishing, and medium cut machining of super alloy materials. The coating consists of ultra-thin layers of TiAlN and AlCrN, alternately stacked up to 1,000 layers.

LISTED UNDER: Machining Equipment & Tools | Device Coating

Teflon Tubing Integrated into Motion Control Cable

July 16, 2008 5:08 am | Product Releases | Comments

Teflon hollow tubing has been made available for flat power and signal cables. This new option is suitable for pneumatics or fluids, making it an ideal addition for many motion applications that normally require additional conduits for those elements.

LISTED UNDER: Tubing-Processing Equipment

End Mills for Micro Machining Applications

July 15, 2008 4:33 am | Product Releases | Comments

An innovative, geometrically optimized cutting edge combined with a slim, concave, tapered neck provide flexible, high-performance milling solutions in a wide variety of materials from 66 Rc hardened steel to graphite. The tools are offered in cutting diameters from 0.2 mm (0.008") to 2 ,, (0.

LISTED UNDER: Milling Machines
Advertisement

VHD Series for High Load Motion Control

July 1, 2008 5:17 am | Product Releases | Comments

The machine is ideal for eliminating drag and wear associated with high pre-load forces. The anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any nut assembly.

LISTED UNDER: Screw Machines

New Loading Device Yields Previously Unachievable Levels of Accuracy

June 23, 2008 5:35 am | Product Releases | Comments

An advanced method of loading material into a gravimetric feeder makes it possible to meter colorant or additive into a plastics processing machine with a degree of accuracy far exceeding that achieved with a volumetric feeder.

LISTED UNDER: Molding Equipment

Extrusion Tooling for Tiny Medical Tubing

March 11, 2008 5:10 am | Guill Tool & Engineering Co., Inc. | Product Releases | Comments

The MediFlow system is capable of producing tubing finer than a single human hair&#151the next generation of medical tubing extrusion technology&#151with minimum tolerances of just 0.002 inches.

LISTED UNDER: Extrusion Equipment

CNC Micro-Milling Machines

January 15, 2008 8:30 am | Product Releases | Comments

CNC micro-milling machines provide cutting edge solutions for any manufacturer machining small, high precision parts.

LISTED UNDER: Milling Machines | CNC Machining | Micromachining

Drills

December 10, 2007 9:53 am | Product Releases | Comments

The CrazyDrill is a small drill for the most demanding requirements. It is available in four versions, each with a geometry optimally suited to the customers’ requirements.

LISTED UNDER: Machining Equipment & Tools

Injection Press

December 10, 2007 9:53 am | Product Releases | Comments

The G9 Series of injection presses for rubber, TPE, and LSR products has been expanded. The showcase machine in this new generation is the V79, a 550-ton press with advanced design features in the mechanical, electronic, and hydraulic construction aspects.

LISTED UNDER: Molding Equipment

Battery-Free Infrared Touch Probe

December 10, 2007 9:52 am | Heidenhain Corp. | Product Releases | Comments

For users looking for an alternative to battery-operated touch probes for machining applications, the TS 444 infrared touch probe is offered.

LISTED UNDER: Machining Equipment & Tools | Batteries

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading