Advertisement
Services

Modular Quick-Change Extrusion System

May 28, 2015 9:43 am | by American Kuhne | Product Releases | Comments

A new modular extrusion system enables processors of tubing and other small-diameter medical products to be up and running with a new job just three minutes after the previous run, leaving the tasks involved in die and barrel cleanout to take place outside the...

LISTED UNDER: Extrusion Equipment | Extrusion

Thermoplastic Molding

April 29, 2015 5:24 pm | ProMed Molded Products, Inc. | Products

Our competitive advantage is having the right equipment and processes in place to help minimize material waste and maximize efficiency. Our highly automated molding technology provides cost-effective utilization of biocompatible-grade polymers (plastics) in complex and difficult-to-manufacture geometries.

LISTED UNDER: Thermoplastics Molding

Silicone Molding

April 29, 2015 5:21 pm | ProMed Molded Products, Inc. | Products

Processed within one of several Class 10,000 cleanrooms, ProMed uses the appropriate technology that best supports your design, material selection, and cost-structure requirements. Additionally, we offer custom compounding to meet the unique performance requirements of your design. ProMed has expertise in working with the full spectrum of silicones covering a wide range of properties and characteristics. We will assist in your material selection to help ensure all design requirements are met.

LISTED UNDER: Silicone Molding
Advertisement

Microporous Copper Foam

April 22, 2015 11:06 am | by Goodfellow Corporation | Product Releases | Comments

Goodfellow offers a new copper foam with pore sizes between 300 and 600µm and a relative density of around 37%, providing a much higher surface area than traditional copper foams. This microporous material is expected to be of particular interest to design...

LISTED UNDER: Services | Heat Exchangers | Microporous

Medical Contract Manufacturing

March 26, 2015 5:03 pm | OraTech | Products

We are an experienced and innovative contract manufacturer of medical and dental implants as well as other various dental accessories.Our in-house capabilities provide unmatched turnaround and with our “Total Package” capabilities, OraTech eliminates layers of product costs by streamlining your product. We offer product design, prototyping, tooling, injection molding, thermal forming, assembly, complete packaging and distribution in our 275,000 square foot facility.We utilize high-tech state-of-the-art processes from our Eden 333, Willemin 5 Axis High Speed Milling to the Haas Multigrind® 5 access HT. and Makino CNC.We are committed to the best!

LISTED UNDER: Injection Molding | Full Service Contract Manufacturing

Contract Manufacturing

March 26, 2015 5:01 pm | OraTech | Products

GET SMARTER. OraTech’s turnkey programs and end-to-end capabilities simplify production, significantly reduce time to market and improve profitability. With our vertically integrated capabilities, we can take your project all the way from product acceptance to commercialization with great control and flexibility. OraTech specializes in developing custom products and delivering market-ready product to meet the precise specifications of the following industries: Dental, Medical & OTC Retail

LISTED UNDER: Injection Molding | Full Service Contract Manufacturing | Conceptual Design & Visualization

3D Printing Database

March 11, 2015 4:53 pm | by Senvol | Product Releases | Comments

Given the rapid growth of the industrial additive manufacturing (i.e. 3D printing) industry, it has become increasingly difficult to keep track of all of the machines and materials that are on the market. Senvol has solved this problem with the launch of the Senvol Database...

LISTED UNDER: 3D Printing | Additive Manufacturing | Services

Titanium Etched Components

March 11, 2015 10:33 am | by Precision Micro, Ltd. | Precision Micro, Ltd. | Product Releases | Comments

Titanium is fast becoming the material of choice in a growing number of industrial applications, most notably the aerospace, electronics, chemical, and medical sectors. Key among the attributes that make it so attractive is its excellent strength-to-weight ratio, biocompatibility, corrosion...

LISTED UNDER: Photo Etching
Advertisement

Flush Cutter

February 25, 2015 12:09 pm | by Xuron Corp. | Product Releases | Comments

An ergonomic plastics degating tool that employs by-pass cutting rather than conventional compression cutting to produce clean, flat cuts without edge deformation is available from Xuron Corp. of Saco, Maine. The Xuron Model 2175A Maxi-Shear Flush Cutter is ideal for removing molded plastic...

LISTED UNDER: Cutting

Fully Extruded Torque Assembly

February 2, 2015 3:24 pm | by Asahi Intecc Usa, Inc. | ASAHI INTECC USA, INC. | Product Releases | Comments

Asahi Intecc, an ISO 9001/13485 certified medical device components manufacturer, now offers “fully extruded stainless or nitinol torque-able assemblies” as solutions for emerging design projects. With the acquisition of a polymer tube manufacturer for microcatheters in 2010...

LISTED UNDER: Extrusion | Product R&D

Three-Dimensional Electroformed Micro-Structure Capability

December 2, 2014 1:57 pm | by Metrigraphics, LLC | Metrigraphics, LLC | Product Releases | Comments

Metrigraphics, a process development and manufacturing resource for ultra-miniature passive circuits and structures, has announced it has developed an advanced process for creating high aspect ratio three-dimensional microstructures. Precision electroforming can create three-dimensional, single or complex, multi-layer microstructures. Geometric options are unlimited because the X, Y, Z str...

LISTED UNDER: Electroforming | Full Service Contract Manufacturing

Molding Services in Cleanroom Environment

October 15, 2014 8:30 am | by MDT Staff | Sil-Pro, LLC | Product Releases | Comments

Sil-Pro has announced the completion of 6,000 additional square feet of ISO Class 7 cleanroom space. The new space is a response to an increased demand for contract manufacturing/assembly applications, as well as thermoplastic molding, by new and existing customers...

LISTED UNDER: Injection Molding | Molding | Thermoplastics Molding

Micromachining

September 30, 2014 5:49 pm | Mikrotech | Products

Micromachining from Mikrotech offers best-in-class multi-axis CNC and Swiss screw machining services for prototype and low volume production. The company's micromachining processes overcome the limitations of established technologies enabling MIS device designers and manufacturers to design and fabricate smaller components with more complex features and higher precision tolerances.

LISTED UNDER: Micro Molding | Micromachining | Molding

Plastic Injection Molding

September 30, 2014 5:09 pm | Proto Labs, Inc. | Products

Protomold provides quick-turn thermoplastic injection molding often used for prototyping, bridge tooling and short-run manufacturing up to 10,000+ parts. We use advanced aluminum alloy molds that allow us to eliminate the costly and time-consuming custom engineering that normally goes into the development of tooling. Protomold offer hundreds of engineering-grade resins that produce molded parts that are strong and can have excellent finishes.

LISTED UNDER: Injection Molding | Insert Molding | Prototyping

Expanded Fineblanking Capabilities

September 26, 2014 8:30 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | Comments

Connecticut Spring & Stamping (CSS), a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it has further expanded its capabilities to include fineblanking, ideal for economically producing highly complex...

LISTED UNDER: Stamping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading