Advertisement

Injection Molding Guide

November 4, 2004 6:23 am | Product Releases | Comments

This Practical Guide to Injection Molding is based on course material used by the Arburg in training operators of injection molding machines. It comes from many years of experience in the field and has been edited by an expert injection molder at Warwick University.

LISTED UNDER: Injection Molding | Injection Molding

Electric Injection Molding Machine

November 2, 2004 5:41 am | Product Releases | Comments

The MEII series electric injection molding machine instantly reaches maximum injection speeds to accurately mold thin-wall and fine-precision parts. A belt-less electric injection drive servometer is behind the excellent performance of the MEII series.

LISTED UNDER: Molding Equipment | Injection Molding

Injection Molding Simulation Software

October 15, 2004 8:20 am | Product Releases | Comments

Moldex3D plastic injection molding simulation software offers faster solve-times, higher accuracy, ease-of-use, and lower prices compared to similar software.

LISTED UNDER: Product Design & MFG Software | Injection Molding
Advertisement

Fiber Abrasive Brushes

October 15, 2004 7:03 am | Product Releases | Comments

Fiber abrasive brushes are being used to deburr molded plastic pieces for the medical products industry. The Bradex&reg fiber abrasive brushes are utilized by a company that manufactures plastic trays for surgical and medical kits.

LISTED UNDER: Surface Modification | Thermoplastics Molding

Surface Preparation Brushes

October 15, 2004 7:03 am | Product Releases | Comments

FybRglass&reg Surface Preparation Brushes are excellent tools for soldering, painting, and epoxying applications. The roughening of the surface enhances adhesion of paint, solder, and epoxy.

LISTED UNDER: Surface Modification | Stamping

Inside Implantable Devices

October 15, 2004 6:17 am | Product Releases | Comments

MICS-enabled implantable medical devices are just starting to appear in the marketplace. This exclusive report provides a summary of the FCC rules governing MICS devices, an overview of a new low-power 402-405 MHz RF transceiver, and implications for the future.

LISTED UNDER: Polymers | Casting | Transducers

Epoxy Adhesive (1177)

September 3, 2004 5:50 am | Master Bond, Inc. | Product Releases | Comments

This room temperature curing, two component epoxy adhesive, sealant, coating, and casting material is called EP42HT-2. This compound features high temperature resistance along with outstanding chemical resistance.

LISTED UNDER: Epoxy | Microbiology/Chemical Testing | Medical Device Testing

Rapid Injection Molded Parts

September 3, 2004 5:50 am | Proto Labs, Inc. | Product Releases | Comments

Design engineers struggling to meet product design and development deadlines can now obtain rapid injection molded parts faster and more cost-effectively than ever before, due to recent improvements in the company's proprietary rapid injection molding process.

LISTED UNDER: Injection Molding | Injection Molding | Product Design
Advertisement

Alignment Kit

September 3, 2004 5:50 am | Product Releases | Comments

Maintaining the precise alignment of today's manufacturing equipment is becoming an increasing challenge for industry.

LISTED UNDER: Measurement Instruments | Injection Molding | Micro Molding

Vacuum Rubber Injection Machine

September 3, 2004 5:50 am | Product Releases | Comments

Using the company's patented vacuum molding system, the Vacu-Jet&#153 Vacuum Rubber Injection Molding System eliminates or minimizes the entrapment of air or gases that cause defects in molded products.

LISTED UNDER: Molding Equipment | Injection Molding

Medical Foam

September 3, 2004 5:30 am | Product Releases | Comments

Rynel, Inc. has developed a molding process that allows its bio-compatible foam to be formed into small, highly-detailed, three-dimensional components.

LISTED UNDER: Foam | Die Cutting

Machining Center

August 4, 2004 8:16 am | Product Releases | Comments

The V22 vertical machining center is designed for small part, high-accuracy machining. This ultimate machining center offers a 40,000-RPM spindle with superior finishing abilities, ideal for intricate work.

LISTED UNDER: Machining Centers | Injection Molding

Cap Closing Machine

August 4, 2004 8:16 am | Product Releases | Comments

Designed for performance and low maintenance, the cap closing machine offers ease in product changeover to accommodate different sizes and styles. Standard features include automatic feeding, closed lid inspection, and an integrated reject station.

LISTED UNDER: Other Equipment | Injection Molding

Silicone Extruded/Molded Products

July 8, 2004 11:39 am | Product Releases | Comments

Company manufactures custom silicone extruded and molded components for use in disposable medical devices. It has over 30 years of experience in silicone technology and is a member of the Dow Corning Medical Fabricator's Network. Jamak is ISO 9001/QS9000 certified and has a Class 100,000 clean room.

LISTED UNDER: Silicon Molding

Rotary Stage

June 8, 2004 9:52 am | Product Releases | Comments

The ASR1100 series is an extension of the ASR1000 direct-drive rotary stage used in many laser machining applications, including the manufacture of the most technologically-advanced cylindrical devices in use today.

LISTED UNDER: Machining Equipment & Tools | Laser Machining

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading