Advertisement

Teflon Tubing Integrated into Motion Control Cable

July 16, 2008 5:08 am | Cicoil Corporation | Product Releases | Comments

Teflon hollow tubing has been made available for flat power and signal cables. This new option is suitable for pneumatics or fluids, making it an ideal addition for many motion applications that normally require additional conduits for those elements.

LISTED UNDER: Tubing-Processing Equipment

End Mills for Micro Machining Applications

July 15, 2008 4:33 am | Emuge Corp. | Product Releases | Comments

An innovative, geometrically optimized cutting edge combined with a slim, concave, tapered neck provide flexible, high-performance milling solutions in a wide variety of materials from 66 Rc hardened steel to graphite. The tools are offered in cutting diameters from 0.2 mm (0.008") to 2 ,, (0.

LISTED UNDER: Milling Machines

Custom Die-Cutting Service Eliminates Tooling and Speeds Turnaround

July 2, 2008 4:33 am | Interstate Specialty Products, Inc. | Product Releases | Comments

This digital die-less cutting service for high-precision, non-metallic parts is ideal for parts with intricate shapes including narrow cross sections and close holes. The service can cut sizes from under 1 inches sq. up to 60 inches&#215 120 inches, with &plusmn0.

LISTED UNDER: Die Cutting
Advertisement

VHD Series for High Load Motion Control

July 1, 2008 5:17 am | Kerk Motion Products | Product Releases | Comments

The machine is ideal for eliminating drag and wear associated with high pre-load forces. The anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any nut assembly.

LISTED UNDER: Screw Machines

Antimicrobial Permanently and Safely Protects Medical Devices, Healthcare Surfaces

June 24, 2008 5:44 am | Biosafe | Product Releases | Comments

The antimicrobial protects plastics and nonwoven fabrics from staining, pitting, deterioration, and odor caused by bacteria, mold, mildew, and fungi, without compromising end-product safety.

LISTED UNDER: Antimicrobial | Injection Molding | Micro Molding

New Loading Device Yields Previously Unachievable Levels of Accuracy

June 23, 2008 5:35 am | Maguire Products Inc. | Product Releases | Comments

An advanced method of loading material into a gravimetric feeder makes it possible to meter colorant or additive into a plastics processing machine with a degree of accuracy far exceeding that achieved with a volumetric feeder.

LISTED UNDER: Molding Equipment

3D Parts Can Be Injection Molded

May 8, 2008 8:43 am | Cool Polymers, Inc. | Product Releases | Comments

A materials developer can now injection mold metal parts on standard injection molding machinery, and in tools designed for plastic. This breakthrough comes about as a result of a new metal alloy, Xyloy, that is stronger than die cast metal parts and has no porosity.

LISTED UNDER: Precious Metals | Injection Molding | Metal Injection Molding

Earplug Scrap/Tear Issue Hears of Silicone Solution

March 11, 2008 7:57 am | Product Releases | Comments

Leading retail earplug manufacturer McKeon Products Inc. recently embarked on progressing its advanced earplug line. McKeon President/CEO Devin Benner commissioned technically advanced, multinational liquid-silicone parts molder Silcotech North America Inc.

LISTED UNDER: Prototyping | Silicon Molding | Silicon Molding
Advertisement

Injection Molding and Extrusion Grade Vinyl Compounds

March 11, 2008 5:10 am | PolyOne Corp. | Product Releases | Comments

The Geon HC product line will feature flexible injection molding and extrusion grade vinyl compounds with a wide range of durometers. These compounds are available from as low as 60 Shore A through nearly-rigid grades, and many have USP Class 6 and FDA regulatory status.

LISTED UNDER: Molding | Injection Molding

Extrusion Tooling for Tiny Medical Tubing

March 11, 2008 5:10 am | Guill Tool & Engineering Co., Inc. | Product Releases | Comments

The MediFlow system is capable of producing tubing finer than a single human hair&#151the next generation of medical tubing extrusion technology&#151with minimum tolerances of just 0.002 inches.

LISTED UNDER: Extrusion Equipment

Sterilization Resistant Coating

February 15, 2008 9:34 am | Master Bond, Inc. | Product Releases | Comments

EP42HT-2 is a room temperature curable two component epoxy, adhesive, coating, casting, and sealant material featuring high temperature resistance along with outstanding chemical resistance.

LISTED UNDER: Epoxy | Microbiology/Chemical Testing | Medical Device Testing

Quick Turnaround, Quick Success

February 14, 2008 5:22 am | Product Releases | Comments

The Sentinelle Vanguard Breast MR Auxiliary Table with eight channel coil array transforms a GE MRI into a dedicated system for Breast MR imaging and intervention. The Variable Coil Geometry of the eight channel array allows the position of the coils to be customized for every patient.

LISTED UNDER: CNC Machining | CNC Machining

CNC Micro-Milling Machines

January 15, 2008 8:30 am | Microlution, Inc. | Product Releases | Comments

CNC micro-milling machines provide cutting edge solutions for any manufacturer machining small, high precision parts.

LISTED UNDER: Milling Machines | CNC Machining | Micromachining

Liquid Silicone Micro Molding

January 10, 2008 10:59 am | Engel North America | Product Releases | Comments

The company’s liquid silicone micro molding system offers the precision of an electric injection molding unit combined with a 12 mm, specially-designed LSR screw and check disc assembly and the flexibility of a tiebarless clamp design.

LISTED UNDER: Micro Molding | Injection Molding | Micro Molding

Fine Microetched Screens

January 10, 2008 6:55 am | Product Releases | Comments

Fine MicroEtch screens for filtering are manufactured using photoetching technology. Unlike stamping, photoetching yields a burr-free product, resulting in cleaner, more efficient screens with greater material integrity. They are ideal for use as filters in the medical market.

LISTED UNDER: Screens | Stamping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading