Advertisement
Component Fabrication

Flush Cutter

February 25, 2015 12:09 pm | by Xuron Corp. | Product Releases | Comments

An ergonomic plastics degating tool that employs by-pass cutting rather than conventional compression cutting to produce clean, flat cuts without edge deformation is available from Xuron Corp. of Saco, Maine. The Xuron® Model 2175A Maxi-Shear Flush Cutter is ideal for removing molded plastic parts from sprues because it employs by-pass cutting which produces clean, flat cuts without the edg...

LISTED UNDER: Cutting

CNC Turning Center

February 23, 2015 11:48 am | by Methods Machine Tools, Inc. | Product Releases | Comments

Methods Machine Tools, Inc., a supplier of innovative precision machine tools, automation and accessories, has expanded its FEELER FT-Series High Performance CNC Turning Centers line with the new FT-250SY. A unique capability in its class, the FT-250SY features a true Y-Axis with 100 mm (+/- 50 mm) of travel...

LISTED UNDER: Machining Centers | Machining Equipment & Tools

Fully Extruded Torque Assembly

February 2, 2015 3:24 pm | by Asahi Intecc Usa, Inc. | ASAHI INTECC USA, INC. | Product Releases | Comments

Asahi Intecc, an ISO 9001/13485 certified medical device components manufacturer, now offers “fully extruded stainless or nitinol torque-able assemblies” as solutions for emerging design projects. With the acquisition of a polymer tube manufacturer for microcatheters in 2010...

LISTED UNDER: Extrusion | Product R&D
Advertisement

Linear Grinding System

January 28, 2015 2:05 pm | by Schütte | Product Releases | Comments

Schütte (Jackson, Michigan) today announces the introduction of its new 325linear machine, a 5-axis CNC grinder with extended x- and y-axis movement plus two auxiliary slides for workpiece clamping and improved grinding wheel guidance over the entire machining envelope. Micro tools...

LISTED UNDER: Machining Centers

Micro Vertical Injection Molding Machine

January 28, 2015 12:36 pm | by Sodick Plustech | Product Releases | Comments

Plustech, Inc., the North American branch of Sodick’s IMM Division, will be introducing the new HC03VRE Micro Vertical Molding Machine at NPE2015. Designed for the high-speed molding of precision micro parts, the HC03VRE achieves a dry cycle time of only 0.9 seconds. Short cycle times are made possible using a mold clamping system that closes and clamps in a single motion coupled with a bel...

LISTED UNDER: Molding Equipment | Molding Systems

Titanium Thread Mill Program

January 12, 2015 8:38 am | by Emuge Corp. | Product Releases | Comments

Emuge Corp. announced they are introducing a comprehensive line of high-performance tools for threading demanding alloyed Titanium materials. Ranging from taps with unique new geometry designs to solid carbide thread mills, the new program provides solutions for the most demanding titanium challenges such as in Aerospace, Defense and Medical machining applications. A full line...

LISTED UNDER: Machining Equipment & Tools

Ultra-fast, Ultra-Accurate 3D Digitizers for Quality Inspection

December 29, 2014 4:30 pm | by Numetrix Technologies Inc. | Product Releases | Comments

Based on MVE full-frame 3D snapshot technology, NX3D digitizers provide the most accurate 3D data on the market for inline metrology and real-time industrial inspection...

LISTED UNDER: Extrusion Equipment | Machining Equipment & Tools

Compact Dust and Fine Removal System

December 29, 2014 3:25 pm | by Size Reduction Specialists Corp. | Size Reduction Specialists Corp. | Product Releases | Comments

Size Reduction Specialists, known for the Bi-Cutter screenless granulator, announces the release of their latest DFS series Dust and Fine Removal System. The DFS Series is a line of innovative, compact dust and fine separation systems developed to enhance molding procedures by the removal of dust, powders and fines from regrind or v...

LISTED UNDER: Extrusion Equipment | Molding Equipment | Molding Systems
Advertisement

Three-Dimensional Electroformed Micro-Structure Capability

December 2, 2014 1:57 pm | by Metrigraphics, LLC | Metrigraphics, LLC | Product Releases | Comments

Metrigraphics, a process development and manufacturing resource for ultra-miniature passive circuits and structures, has announced it has developed an advanced process for creating high aspect ratio three-dimensional microstructures. Precision electroforming can create three-dimensional, single or complex, multi-layer microstructures. Geometric options are unlimited because the X, Y, Z str...

LISTED UNDER: Electroforming | Full Service Contract Manufacturing

Wide Variety of Extrusion Tooling

December 2, 2014 7:44 am | by Guill Tool & Engineering Co., Inc. | Guill Tool & Engineering Co., Inc. | Product Releases | Comments

Guill Tool, a West Warwick, RI designer and builder of extrusion tooling, offers an assortment of literature for machine builders and extruders on its website. Individual brochures are offered, depicting the wide array of tooling possibilities -- straight inline heads, rotary heads...

LISTED UNDER: Extrusion Equipment

Precision Medical Machining at MD&M West 2015

November 19, 2014 1:08 pm | by Gf Agie Charmilles | GF Agie Charmilles | Product Releases | Comments

GF Machining Solutions will demonstrate the precision, performance and efficiency of milling and EDM systems designed with medical machining applications in mind at MD&M 2015 on Feb. 10 – 12 at the Anaheim Convention Center, Anaheim, California. Visitors to the company’s show booth 4161 will experience the Mikron HSM 200U LP (linear performance) milling...

LISTED UNDER: Machining Centers | Wire, EDM

Maintenance-Free Venturi Vacuum Pump

November 6, 2014 2:46 pm | by Vaccon Company | Vaccon Company | Product Releases | Comments

Vaccon’s RTM series vacuum cartridges and pumps, ideally suited for the packaging industry, replace failed or clogged multi-stage pumps to maximize productivity and minimize downtime. Unlike multi-stage cartridges, Vaccon’s single stage cartridges allow dirt, dust and debris to pass through the pump without clogging. RTM cartridges thread directly into existing multi-stage vacuum pumps and...

LISTED UNDER: Extrusion Equipment | Machining Equipment & Tools | 3D Scanning

Molding Services in Cleanroom Environment

October 15, 2014 8:30 am | by MDT Staff | Sil-Pro, LLC | Product Releases | Comments

Sil-Pro has announced the completion of 6,000 additional square feet of ISO Class 7 cleanroom space. The new space is a response to an increased demand for contract manufacturing/assembly applications, as well as thermoplastic molding, by new and existing customers...

LISTED UNDER: Injection Molding | Molding | Thermoplastics Molding

Micromachining

September 30, 2014 5:49 pm | Mikrotech | Products

Micromachining from Mikrotech offers best-in-class multi-axis CNC and Swiss screw machining services for prototype and low volume production. The company's micromachining processes overcome the limitations of established technologies enabling MIS device designers and manufacturers to design and fabricate smaller components with more complex features and higher precision tolerances.

LISTED UNDER: Micro Molding | Micromachining | Molding

Plastic Injection Molding

September 30, 2014 5:09 pm | Proto Labs, Inc. | Products

Protomold provides quick-turn thermoplastic injection molding often used for prototyping, bridge tooling and short-run manufacturing up to 10,000+ parts. We use advanced aluminum alloy molds that allow us to eliminate the costly and time-consuming custom engineering that normally goes into the development of tooling. Protomold offer hundreds of engineering-grade resins that produce molded parts that are strong and can have excellent finishes.

LISTED UNDER: Injection Molding | Insert Molding | Prototyping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading