Advertisement
Design Services

Stryker InZone

May 29, 2015 5:26 pm | Benchmark Electronics | Products

The Stryker Neurovascular InZone Detachment System is a sterile, handheld, single-patient use device designed for use with Stryker Neurovascular Detachable Coils. Use of Stryker Neurovascular Detachable Coils involves a minimally invasive procedure to access the treatment area (intracranial aneurysm or other neuro or peripheral abnormality) from within a blood vessel (endovascular therapy). Treatment involves insertion of a Stryker Neurovascular two tip-marker microcatheter into a patient's femoral artery and then navigation of the microcatheter through the vascular system, into the neuro or peripheral vasculature, and then to the site of the lesion.

LISTED UNDER: Box Build | Electromedical Contract Manufacturing | Full Service Contract Manufacturing

Accuvein

May 29, 2015 4:39 pm | Benchmark Electronics | Products

Providing a blood sample is an activity enjoyed by few patients. Luckily, clinicians are well-versed in venipuncture, and it can be a relatively quick and painless process. Unless a patient has “difficult” or hard-to-detect veins, that is, in which case, the uncomfortable poking and prodding begins. To minimize opportunities for multiple needle sticks during venipuncture—and thereby improving patient care and efficiency—AccuVein LLC developed the AV300 portable, noncontact, vein-illumination device. The AccuVein AV300 highlights the hemoglobin in the veins differently than the surrounding tissue, so it helps identify veins for all venipuncture procedures from IV starts to blood draw.

LISTED UNDER: Electromedical Contract Manufacturing | Full Service Contract Manufacturing | Design Services

Battery Pack Design and Manufacturing

May 28, 2015 2:12 pm | by Aved Electronics, Inc. | Product Releases | Comments

Aved Battery Pack Design & Manufacturing specializes in the development and production of high reliability lithium-based power technologies and battery management systems (BMS) for mission-critical applications. Matching the appropriate...

LISTED UNDER: Design Services | Batteries
Advertisement

3D Printing

May 28, 2015 2:04 pm | CleanCut Technologies | Products

Even if your device is still in the CAD drawing concept-stage, CleanCut Technologies can start designing the packaging elements for it, putting you ahead of the game. CCT creates exceptionally accurate 3D product packaging models with our in-house 3D printer. 3D sampling for product fit verification is produced using materials such as ABS or Ultem, and we can reliably provide samples based on a customer’s confidential electronic files within 48 to 72 hours. If a project requires prototype tooling or sampling, we can produce 3D printed temporary tooling for small run jobs, instead of waiting weeks for a third-party vendor.

LISTED UNDER: Conceptual Design & Visualization | Design Services | Prototyping

Design & Prototyping

May 28, 2015 1:58 pm | CleanCut Technologies | Products

The packaging elements of your medical device play a critical role in the safety and usability of the device. Inferior packaging could lead to device damage or contamination. Trust CleanCut Technologies to design innovative, efficient, safe and sterile protection for the device you’ve worked so hard to create. Due to our diverse background in medical device packaging, design and manufacturing, we are able to plan, foresee and mitigate the challenges that may arise with any given project, and still meet our customers’ project schedules and product quality requirements. Design and prototyping services are performed under strict compliance with full traceability, and in controlled manufacturing environments.

LISTED UNDER: Conceptual Design & Visualization | Design Services | Rapid Prototyping

Stainless Steel Cable Assemblies

April 3, 2015 2:46 pm | ASAHI INTECC USA, INC. | Products

STAINLESS STEEL CABLE ASSEMBLIES Eyelets, threaded screws, or balls may be crimped, laser welded, pressed, or swaged on stainless steel cable assemblies. Asahi Intecc welcomes mechanical and medical cable assembly projects ranging in size from miniature cable assemblies 0.004” to 3mm (1/64” to 1/8” with PTFE or Nylon coating), and in some cases larger stainless cable assemblies ranging from 4mm, 5mm, 6mm, 7mm (1/8”, 3/16”, 1/4”, etc) . Medical device stainless cable assembly applications include orthopedics, laparoscopic and endoscopic instruments, and mechanical systems for medical equipment. Stainless, copper, brass, and other fittings are offered.

LISTED UNDER: Design Services | Product R&D | Abrasion resistant

Contract Manufacturing

March 26, 2015 5:01 pm | OraTech | Products

GET SMARTER. OraTech’s turnkey programs and end-to-end capabilities simplify production, significantly reduce time to market and improve profitability. With our vertically integrated capabilities, we can take your project all the way from product acceptance to commercialization with great control and flexibility. OraTech specializes in developing custom products and delivering market-ready product to meet the precise specifications of the following industries: Dental, Medical & OTC Retail

LISTED UNDER: Injection Molding | Full Service Contract Manufacturing | Conceptual Design & Visualization

LOW-STRETCH STAINLESS CABLES (COATED, MASKED, HIGH TENSION)

March 11, 2015 6:15 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers responsive high-tension angulation wires (or low-stretch stainless cables) to medical device and endoscope product designers and high-volume manufacturing programs, increasing your fatigue and breakload strength to comparable cables with identical material, configuration, and diameter by 10 to 20%. These high-tension angulation wires may be coated with durable, abrasion-resistant ptfe and nylon coatings, depending on the application. Additional advantages include a clean material surface finish on the stainless cable which is extremely easy to solder; swaging, coating, and masking for your specific durability, and custom stainless cable assembly.

LISTED UNDER: Design Services | Product Design | Abrasion resistant
Advertisement

STAINLESS STEEL DRIVE CABLE - HIGH SPEED ROTATION 0.5 - 7MM OD

March 11, 2015 4:09 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers high speed rotation stainless steel miniature drive cables for devices, instruments, and mechanisms, requiring diameters less than 1/3” and as small as 0.020” (0.5mm). The Asahi Drive Cable is a multi-layer, multi-filar, stranded flexible shaft with high bi-directional torque transmission properties with minimal backlash or lag. The multi-stranded shaft may be laser welded and edm cut to short lengths for a smooth finish (1”) to 2m lengths depending on the application. A cannulated 3 layer version (flat wire torque coil) is also offered for applications in which material in which aspirated material is extracted through the lumen.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

actone cable tube (ss 304, 316, niti, mp35n) + inner polymer liner

March 11, 2015 3:09 pm | ASAHI INTECC USA, INC. | Products

ACTONE is a hollow wire rope that incorporates three of ASAHI INTECC's core technologies - wire drawing, wire forming, and torque improvement, as well as our latest technology to add a inner PTFE or ETFE slipcoat or polymer liner through the lumen of the actone for smooth delivery of guidewires, surgical instruments, bodily fluids, saline, drugs, and nutrients. The ACTONE CABLE TUBE is offered in SS 304, SS 316 Nickel-Titanium (NiTi), and MP35N. Liners and extrusions, coatings, heat shrinks offered in ETFE, PU, PEBAX, FEP, PTFE, PE, etc.

LISTED UNDER: Design Services | Product Design | Product R&D

Torque Wirerope 1x3, 1x7, 1x19

March 11, 2015 2:56 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc custom manufactures stainless steel torque wireropes at lengths from about 1" to 3m. Manufactured in either stainless steel 304 or stainless steel 316. (ASTM A-313 and JIS). Spray, dip, extrusion, heat shrink all available. Depending on the configuration, a range of 0.010" to 2mm outside diameter is available. Typically used for hand rotation over a long length, please see our drivecables which are motor-rotated and available from approximately 0.2mm to 7mm OD.

LISTED UNDER: Design Services | Product R&D | Prototyping

Multi-Stranded Flexible Shaft

February 4, 2015 1:51 pm | by Asahi Intecc Usa, Inc. | ASAHI INTECC USA, INC. | Product Releases | Comments

The ACTONE CABLE TUBE Ultra-Thin (UT) is a hollow, single-layer, multi-stranded flexible shaft composed of flat stainless wire drawn by Asahi Intecc to reduce the wall thickness. Medical device and industrial device designers can achieve a customized solution with a reduced device profile, 1-1 torque in tortuous paths and anatomies...

LISTED UNDER: Custom Assembly | Laser Welding | Full Service Contract Manufacturing

App Developer Specialist

October 29, 2014 7:09 pm | by MDT Staff | Microchip Technology, Inc. | Product Releases | Comments

Microchip Technology Inc., a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, today announced its first App Developer Specialist—WillowTree Apps—the latest company to join Microchip’s world-class Design Partner Network...

LISTED UNDER: Design Services

Molded Part Design for Implantable Medical Devices

June 25, 2014 11:35 pm | by MDT Staff | MRPC | Product Releases | Comments

MRPC recently released a new overview sheet highlighting their molded part design and tooling capabilities for implantable medical device components, those meant for long-term implementation inside the human body...

LISTED UNDER: Molding | Design Services | Product Design

New Product Development Website Launched

June 17, 2014 12:29 am | by MDT Staff | Product Releases | Comments

NPI/Medical has recently launched its new website focused at New Product Introduction (NPI). NPI/Medical eliminates the chaos and uncertainty of the product development lifecycle by turning it into a strategic advantage for their customers...

LISTED UNDER: Design Services | Product Design | Product R&D

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading