Advertisement
Design Services

Molded Part Design for Implantable Medical Devices

June 25, 2014 11:35 pm | by MDT Staff | MRPC | Product Releases | Comments

MRPC recently released a new overview sheet highlighting their molded part design and tooling capabilities for implantable medical device components, those meant for long-term implementation inside the human body...

LISTED UNDER: Molding | Design Services | Product Design

New Product Development Website Launched

June 17, 2014 12:29 am | by MDT Staff | Product Releases | Comments

NPI/Medical has recently launched its new website focused at New Product Introduction (NPI). NPI/Medical eliminates the chaos and uncertainty of the product development lifecycle by turning it into a strategic advantage for their customers...

LISTED UNDER: Design Services | Product Design | Product R&D

Powered Surgical Devices

May 13, 2014 5:03 pm | Pro-Dex | Products

Pro-Dex's unique, specialized experience in designing and delivering reliable, powered surgical devices that withstand harsh environments enables OEM customers to focus on their core business. Pro-Dex offers a holistic, integrated approach focused on accelerating time to market to help ensure the development of clinically efficacious and commercially viable products. The development of powered surgical devices requires extreme focus on protecting critical components from harsh environments such as vacuum autoclaves, high pH cleaning solutions, or saline.

LISTED UNDER: Custom Assembly | Design Services | Product Design
Advertisement

Motion Controllers

May 7, 2014 11:45 am | Pro-Dex | Products

Around the world, high-profile customers turn to Pro-Dex OMS for their most critical motion control requirements. Whether it's nuclear fusion, vital medical analysis, radioactive testing or radar guidance systems, engineers depend on the proven reliability and accuracy that Pro-Dex OMS products provide. Pro-Dex OMS products control 1 to 10 axes on a single controller for servo and/or stepper motor control that serve the semiconductor and medical equipment, life sciences and factory automation markets, as well as government research laboratories around the world. Pro-Dex OMS offers motors, drives, and accessories that are often tailor-made to support specific applications

LISTED UNDER: Custom Assembly | Quality Services | Quality-System Certification

Michigan Spring and Stamping

February 21, 2014 11:55 am | RepExact, LLC | Products

Michigan Spring & Stamping of Muskegon, MI offers custom springs, wire forms, and stampings, including design services that draw on 70 years of experience. A designated team serves Life Sciences customers. Their satellite plant in El Paso, TX provides manufacturing flexibility.

LISTED UNDER: Coiling | Stamping | Wire Forming

Speed to Market with Machining Centered Design

August 5, 2013 3:56 pm | by MDT Staff | Norman Noble, Inc. | Product Releases | Comments

Medical Device OEM’s that have applied Norman Noble Inc.’s Design for Manufacturability services have realized substantial benefits. Costs and time-to-market are often cut in half with significant improvements in quality and delivery. These services are most effective when applied to projects that involve tight tolerances and exotic materials, including NiTinol.

LISTED UNDER: CNC Machining | Laser Machining | Machining

GW/PD - GW Plastics Product Development

June 3, 2013 3:58 pm | GW Silicones | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

GW/PD - GW Plastics Product Development

June 3, 2013 2:25 pm | GW Plastics, Inc. | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D
Advertisement

Packaging Consultants

May 9, 2013 10:35 am | Robert C. Vincek Design Associates | Products

Providing a full complement of packaging design, development, engineering, project management, troubleshooting and strategic planning support to fortune 500 and start-up businesses since 1996. We'll bring you the benefit of over 30 years of hands-on experience for maximum project impact and economies.

LISTED UNDER: Design Services | Consulting/Design | Labeling

Engineering Services

April 30, 2013 1:18 pm | Specialty Silicone Fabricators | Products

SSF’s engineering resources support production and engineering services. For production projects our engineering staff is intimately involved in process design, process development, material selection and validation. Our engineering staff has years of experience and familiarity with the processes ensuring that you receive both high value and consistent high quality output. If you are in the early phases of product realization or in the early stages of the Design Control process then Engineering Services is an option where SSF can provide valuable assistance in: Product design ● Design for manufacturability ● Feasibility testing ● Design confirmation testing ● Rapid prototype builds ● Material testing ● Performance testing.

LISTED UNDER: Design Services | Product Design | Product R&D

Contract Manufacturing

April 26, 2013 3:16 pm | Specialty Silicone Fabricators | Products

SSF can support all stages of manufacturing operations: from manual assembly to fully automated device and product manufacturing. We employ highly skilled operators and offer high precision manual manufacturing operations. SSF follows Lean Methods providing you with continual improvement in cost and yield. SSF can help in all aspects of your product development and production. In our manufacturing process we provide traceability of all components and materials. We have microbial control monitoring including product bioburden, pyrogen testing monitoring capabilities. We manufacture in an ISO Class 7 (Class 10,000) clean rooms, ISO Class 8 (Class 100,000) clean rooms and clean rooms.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

Medical Device Drug Combination Products

April 26, 2013 2:51 pm | Specialty Silicone Fabricators | Products

SSF is unique among medical contract manufacturers in that we collaborate daily with both device and pharmaceutical businesses. Recent projects include the assembly of multi-electrode neurological implants, the manufacture of ocular shunts made from biologically derived polymers, and thin film casting of drug eluting, bioresorbable orthopedic implants. SSF is appropriately licensed and registered for both device and drug manufacturing. Our business model, quality system, and facility layout are all designed for flexibility to meet the requirements of our clients. SSF’s Engineering and Quality Departments assist our drug-device clients in design, feasibility, prototyping, clinical builds and commercial release.

LISTED UNDER: Full Service Contract Manufacturing | Conceptual Design & Visualization | Design Services

Extrusion

April 26, 2013 1:28 pm | Specialty Silicone Fabricators | Products

At SSF, our extrusion process is unrivaled. We can vary the inside and outside to your exact specifications. Nothing is too small, too fine or too complicated for our engineers and designers. We are able to layer cross sections from many types of materials to create a product with unique features. Our processes can create a myriad of designs – thin walled, thick walled, ribbed, perforated or split. And we can design any profile of formed extrusions including bends, coils, or pigtails in single or multiple planes. We’ve even developed close tolerance multi-lumen silicone tubing with inner lumens that spiral or twist to a desired pitch. We fabricate to your personal specifications.

LISTED UNDER: Extrusion | Full Service Contract Manufacturing | Design Services

Design and Rapid Prototyping Services

December 6, 2012 9:14 am | Graphicast, Inc. | Product Releases | Comments

Graphicast, Inc., a contract casting house, now offers design and rapid prototyping services to assist engineers in designing parts as castings from the start, maximizing as-cast features to shorten time-to-market and reduce the costs of development, machining, and production.

LISTED UNDER: Conceptual Design & Visualization | Design Services | Product Design

NVision Increases its Medical CT Scanning Projects

November 27, 2012 11:25 am | Nvision Inc. | Product Releases | Comments

NVision reports that an increasing number of its contract scanning services now involve CT scanning for reverse engineering, and inspection and measurement of medical components and surgical tools.

LISTED UNDER: Design Services | Component Testing | Other Testing Services

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading