Advertisement
Product Design

Rolling Ring Linear Drive

April 10, 2015 10:23 am | by Amacoil, Inc. | Amacoil, Inc. | Product Releases | Comments

Changing linear pitch on Uhing rolling ring linear drives is now fast and easy using a lever control option on the drive unit. The pitch control lever permits manually setting and changing linear pitch independently of the drive motor speed or other controls. This means that motors and devices...

LISTED UNDER: Product Design | Measurement Instruments

Brochure on Complex Motion Control Systems

March 26, 2015 12:49 pm | by Physik Instrumente (Pi) Gmbh & Co. Kg | Product Releases | Comments

Precision motion control systems provider PI (Physik Instrumente) L.P. recently released its newest catalog of precision motion solutions for Beamline Instrumentation. The PI Group offers a wide range of high-performance single and multi-axis positioning products, in addition...

LISTED UNDER: Product Design | UV Measurement Equipment

Ultra Low Humidity Dry Cabinet by Eureka Dry Tech

March 25, 2015 5:11 am | Eureka Dry Tech | Products

Eureka XDC-2000 Ultra Low Humidity Dry Cabinet provides handling and storage meeting IPC/JEDEC J-Std-033 and IPC-1601 standards. Features Anti-static Glass, Paint, Shelves, Caster and 1 M Ω Ground Wire. Storage capacity of 1314 Liters. Controlled humidity range is ≤5% RH, Recovers to ≤ 5% RH within 30 minutes after accessing door for 30 seconds or less. Dimensions are 120*193.5*76 cm (W*H*D) Features standalone German Digital TESTO Thermal Hygrometer for independent monitoring of humidity inside the cabinet. 150 Watts Power Consumption. Standard lock with 2 keys. Options such as alarms, data logger, HEPA, etc. are available. Contact us today with your storage requirement and we will provide you with the best solution available on the market.

LISTED UNDER: Special Application Tooling | PCB Assembly | Product Design
Advertisement

LOW-STRETCH STAINLESS CABLES (COATED, MASKED, HIGH TENSION)

March 11, 2015 6:15 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers responsive high-tension angulation wires (or low-stretch stainless cables) to medical device and endoscope product designers and high-volume manufacturing programs, increasing your fatigue and breakload strength to comparable cables with identical material, configuration, and diameter by 10 to 20%. These high-tension angulation wires may be coated with durable, abrasion-resistant ptfe and nylon coatings, depending on the application. Additional advantages include a clean material surface finish on the stainless cable which is extremely easy to solder; swaging, coating, and masking for your specific durability, and custom stainless cable assembly.

LISTED UNDER: Design Services | Product Design | Abrasion resistant

MULTI-LAYER TUBE - POLYMER AND BRAID-POLYMER

March 11, 2015 5:22 pm | ASAHI INTECC USA, INC. | Products

MULTI-LAYER TUBING - POLYMER For customers who need visualization under X-Rays, such as angiographic catheters, Asahi Intecc may provide tubing with bismuth or barium stripes as a radiopaque, chemically resistant resin in a multi-layer tube. Multi-Layer Tubing – Polymer and Braided Reinforcement (Nylon, Tungsten, Stainless) Nylon, tungsten, or stainless braid can be braided over a lubricious, low-friction, drug resistant PTFE liner with a silver mandrel to provide torque response, kink and fluid pressure resistance (saline, blood, drug, chemical, nutrient). Pitch and pick count may be adjusted on the braid for customized flexibility, kink-resistance, and torque properties.

LISTED UNDER: IVD Contract Manufacturing | Product Design | Liners

STAINLESS STEEL DRIVE CABLE - HIGH SPEED ROTATION 0.5 - 7MM OD

March 11, 2015 4:09 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers high speed rotation stainless steel miniature drive cables for devices, instruments, and mechanisms, requiring diameters less than 1/3” and as small as 0.020” (0.5mm). The Asahi Drive Cable is a multi-layer, multi-filar, stranded flexible shaft with high bi-directional torque transmission properties with minimal backlash or lag. The multi-stranded shaft may be laser welded and edm cut to short lengths for a smooth finish (1”) to 2m lengths depending on the application. A cannulated 3 layer version (flat wire torque coil) is also offered for applications in which material in which aspirated material is extracted through the lumen.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

VARIABLE FLEXIBILITY POLYMER TUBING

March 11, 2015 3:56 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc-GMA offers multi-segmented flexibility on continuously extruded shafts which can potentially eliminate or significantly reduce material, labor, and manufacturing costs to fabricate small or large batches of variable flexibility polymer tubes. Asahi Intecc – GMA has estimated up to 3 times labor , manufacturing, and material cost savings and half the work time when extruding the one piece multi-flex polymer tube and comparing to the costs of extruding the multi-piece array of hand assembled polymer shafts. These tubings are often used for catheter delivery systems, in which a proximal push and distal tip floppiness is desired on one tube to for precise vascular positioning.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Product R&D

actone cable tube (ss 304, 316, niti, mp35n) + inner polymer liner

March 11, 2015 3:09 pm | ASAHI INTECC USA, INC. | Products

ACTONE is a hollow wire rope that incorporates three of ASAHI INTECC's core technologies - wire drawing, wire forming, and torque improvement, as well as our latest technology to add a inner PTFE or ETFE slipcoat or polymer liner through the lumen of the actone for smooth delivery of guidewires, surgical instruments, bodily fluids, saline, drugs, and nutrients. The ACTONE CABLE TUBE is offered in SS 304, SS 316 Nickel-Titanium (NiTi), and MP35N. Liners and extrusions, coatings, heat shrinks offered in ETFE, PU, PEBAX, FEP, PTFE, PE, etc.

LISTED UNDER: Design Services | Product Design | Product R&D
Advertisement

IoT-Enabled Product Portfolio

February 26, 2015 4:42 am | by Publitek Ltd | Product Releases | Comments

Wind River, delivering software for intelligent connected systems, today announced that it has enhanced and expanded its Wind River Helix product portfolio to address the system-level opportunities and challenges of the Internet of Things (IoT). In addition, the company has created...

LISTED UNDER: Product Design | Technology Development

Molded Part Design for Implantable Medical Devices

June 25, 2014 11:35 pm | by MDT Staff | MRPC | Product Releases | Comments

MRPC recently released a new overview sheet highlighting their molded part design and tooling capabilities for implantable medical device components, those meant for long-term implementation inside the human body...

LISTED UNDER: Molding | Design Services | Product Design

New Product Development Website Launched

June 17, 2014 12:29 am | by MDT Staff | Product Releases | Comments

NPI/Medical has recently launched its new website focused at New Product Introduction (NPI). NPI/Medical eliminates the chaos and uncertainty of the product development lifecycle by turning it into a strategic advantage for their customers...

LISTED UNDER: Design Services | Product Design | Product R&D

Powered Surgical Devices

May 13, 2014 5:03 pm | Pro-Dex | Products

Pro-Dex's unique, specialized experience in designing and delivering reliable, powered surgical devices that withstand harsh environments enables OEM customers to focus on their core business. Pro-Dex offers a holistic, integrated approach focused on accelerating time to market to help ensure the development of clinically efficacious and commercially viable products. The development of powered surgical devices requires extreme focus on protecting critical components from harsh environments such as vacuum autoclaves, high pH cleaning solutions, or saline.

LISTED UNDER: Custom Assembly | Design Services | Product Design

Comprehensive System Level Integration of Our Micromachined Thin Film Sensors

March 27, 2014 5:13 pm | Innovative Sensor Technology IST USA | Products

Do you have a challenging application? Our highly qualified technical teams can offer you consulting, development, and production assistance for your project. Our application development department can act as an interface between your application and our sensor components. This is especially valuable in working with our more complex flow, humidity, and conductivity sensors. We employ our simplified embedded frontend solutions (electronic and software based), modules, and software algorithms, to support a fast design-in-process and provide ideal sensor operation conditions in development of your application.

LISTED UNDER: Product Design | Product R&D | Thin-film

FlexiPot Position Sensor

December 3, 2013 11:48 am | Tekscan, Inc. | Products

FlexiPot™, by Tekscan, is a flexible membrane potentiometer with an ultra-thin (0.008"), lightweight profile. Low power requirements combined with a linear output make it the ideal position sensor, from both a manufacturing perspective as well as a user perspective. Available in both a ring and strip form for testing and prototyping.

LISTED UNDER: Product Design | Product R&D | Prototyping

Custom Force Sensors

December 3, 2013 11:43 am | Tekscan, Inc. | Products

FlexiForce sensors are piezoresistive force sensors which can be customized for OEM applications. We can make custom FSR sensors in virtually any shape and we offer a wide range of sizes and force ranges. Custom sensors are manufactured and tested to ensure they meet the agreed-upon specifications, including accuracy and repeatability.

LISTED UNDER: Product Design | Product R&D | Prototyping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading