Advertisement

FlexiForce Quickstart Board

December 3, 2013 11:31 am | Tekscan, Inc. | Products

The FlexiForce Quickstart Board is a finished single voltage source circuit designed for OEMs to quickly drop into a prototype, or design into a product to obtain force measurements. Starting at just $150, the Quickstart Board is compatible with all of Tekscan’s off-the-shelf pinned FlexiForce sensors (sold separately). For a limited time, two free sample FlexiForce sensors are included with purchase. Purchase a Quickstart Board today and see how easy it is to integrated FlexiForce sensors into your OEM application.

LISTED UNDER: Product Design | Prototyping | Flexible Circuits

FlexiForce HT201 High-Temperature Sensor

December 3, 2013 11:25 am | Tekscan, Inc. | Products

HT201 is a high-temperature force sensor with a sensing area of 9.53 mm (0.375 in.)diameter. This sensor is available in force ranges of HT201- Low: 0 - 30 lb (0-133 N) HT201- High: 0 - 140 lb (0-445 N) Can perform in temperatures up to 400°F.

LISTED UNDER: Product Design | Product R&D | Prototyping

FlexiForce A401 Sensor

December 3, 2013 11:21 am | Tekscan, Inc. | Products

The FlexiForce A401 sensor has a sensing area of 25.4 mm (91 in.)diameter. This sensor is available in a force range of 0-25 lb.(111 N)

LISTED UNDER: Product Design | Prototyping | Thin-film
Advertisement

FlexiForce A301 Sensor

December 3, 2013 11:17 am | Tekscan, Inc. | Products

The FlexiForce A301 sensor is 1” in length and has a sensing area of .375”. Smaller than the traditional FlexiForce A201 sensor, the A301 is popular among design engineers who are prototyping for OEM applications, which often requires a smaller sensor. These A301 sensors are available in 4-packs/8-packs and in high quantities.

LISTED UNDER: Product Design | Prototyping | Thin-film

FlexiForce A201 Sensor

December 3, 2013 10:28 am | Tekscan, Inc. | Products

FlexiForce standard force sensor: 191 mm (7.5 in.) in length and a sensing area of 9.53 mm (0.375 in.) diameter. This thin, flexible force sensor is easy to integrate into products and applications. The sensors are trimmable and available in various force ranges: 0 - 1 lb. (4.4 N) 0 - 25 lb. (111 N) 0 - 100 lb. (445 N)

LISTED UNDER: Product Design | Prototyping | Measurement Instruments

High Quality Structured Blue Light 3D Scanners

October 31, 2013 4:25 pm | by MDT Staff | Product Releases | Comments

The ATOS Core series is the newest addition to the ATOS product line of advanced 3D scanners engineered by GOM mbH Germany. With GOM's industry benchmarked reputation for designing and manufacturing accurate, high quality and innovative optical metrology systems, the ATOS Core is truly a mini sized powerhouse setting a new price/performance milestone in the marketplace.

LISTED UNDER: Product Design | Rapid Prototyping

Disposable Eye Patches

August 27, 2013 10:29 am | ATL (Ad Tape & Label) | Products

These simple and inexpensive disposable eye patches are used for monocular acuity testing by doctors, screeners, and parents. The 3M Micropore tape has a non-adhesive pad island placed on the tape to avoid contact with the eye and eyelashes. They are comfortable to wear and easy to use and remove. These patches can be purchased in the generic yellow and blue designs or you can customize your own patch. Please contact Mike O'Connell at moconnell@atlco.com for more information or samples.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Contract Packaging

Disposable die cut components

August 22, 2013 3:41 pm | ATL (Ad Tape & Label) | Products

ATL offers custom rotary die cutting and packaging of medical tapes and foams for tight tolerance applications. An experienced engineering staff can assist you with material selection, product design, and flat bed die cut prototypes. Island placement capabilities are also available.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Laminating
Advertisement

GW/PD - GW Plastics Product Development

June 3, 2013 3:58 pm | GW Silicones | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

GW/PD - GW Plastics Product Development

June 3, 2013 2:25 pm | GW Plastics, Inc. | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

Engineering Services

April 30, 2013 1:18 pm | Specialty Silicone Fabricators | Products

SSF’s engineering resources support production and engineering services. For production projects our engineering staff is intimately involved in process design, process development, material selection and validation. Our engineering staff has years of experience and familiarity with the processes ensuring that you receive both high value and consistent high quality output. If you are in the early phases of product realization or in the early stages of the Design Control process then Engineering Services is an option where SSF can provide valuable assistance in: Product design ● Design for manufacturability ● Feasibility testing ● Design confirmation testing ● Rapid prototype builds ● Material testing ● Performance testing.

LISTED UNDER: Design Services | Product Design | Product R&D

Contract Manufacturing

April 26, 2013 3:16 pm | Specialty Silicone Fabricators | Products

SSF can support all stages of manufacturing operations: from manual assembly to fully automated device and product manufacturing. We employ highly skilled operators and offer high precision manual manufacturing operations. SSF follows Lean Methods providing you with continual improvement in cost and yield. SSF can help in all aspects of your product development and production. In our manufacturing process we provide traceability of all components and materials. We have microbial control monitoring including product bioburden, pyrogen testing monitoring capabilities. We manufacture in an ISO Class 7 (Class 10,000) clean rooms, ISO Class 8 (Class 100,000) clean rooms and clean rooms.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

Medical Device Drug Combination Products

April 26, 2013 2:51 pm | Specialty Silicone Fabricators | Products

SSF is unique among medical contract manufacturers in that we collaborate daily with both device and pharmaceutical businesses. Recent projects include the assembly of multi-electrode neurological implants, the manufacture of ocular shunts made from biologically derived polymers, and thin film casting of drug eluting, bioresorbable orthopedic implants. SSF is appropriately licensed and registered for both device and drug manufacturing. Our business model, quality system, and facility layout are all designed for flexibility to meet the requirements of our clients. SSF’s Engineering and Quality Departments assist our drug-device clients in design, feasibility, prototyping, clinical builds and commercial release.

LISTED UNDER: Full Service Contract Manufacturing | Conceptual Design & Visualization | Design Services

Ball Guide Screw Linear Rail

December 21, 2012 10:00 am | Product Releases | Comments

Haydon Kerk Motion Solutions, a brand of AMETEK Precision Motion Control, has introduced the latest and final addition to the new BGS (Ball Guide Screw) linear rail product line. The BGS06 linear rail is a versatile system utilizing the popular size 17...

LISTED UNDER: Ball and Lead Screws | Guide Rollers | Linear Motion Systems

Precision Molded Medical Components and Assemblies

December 20, 2012 10:43 am | Minnesota Rubber & Plastics | Product Releases | Comments

Medical equipment manufacturers seeking a qualified manufacturing partner will find this brochure particularly useful. It details Minnesota Rubber and Plastics’ 65 years of experience in the medical components...

LISTED UNDER: Injection Molding | Molding | Cleanroom Assembly

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading