Advertisement

FlexiForce HT201 High-Temperature Sensor

December 3, 2013 11:25 am | Tekscan | Products

HT201 is a high-temperature force sensor with a sensing area of 9.53 mm (0.375 in.)diameter. This sensor is available in force ranges of HT201- Low: 0 - 30 lb (0-133 N) HT201- High: 0 - 140 lb (0-445 N) Can perform in temperatures up to 400°F.

LISTED UNDER: Product Design | Product R&D | Prototyping

Spooled & Coiled Tubing

June 5, 2013 5:05 pm | Extrusion Alternatives, Inc. | Products

Spooled & Coiled Tubing

LISTED UNDER: Extrusion | Product R&D | Prototyping

Radiopaque Tubing

June 5, 2013 5:01 pm | Extrusion Alternatives, Inc. | Products

Radiopaque Tubing

LISTED UNDER: Extrusion | Product R&D | Prototyping
Advertisement

Paratubing / Multilumen

June 5, 2013 4:57 pm | Extrusion Alternatives, Inc. | Products

Paratubing / Multilumen

LISTED UNDER: Extrusion | Product R&D | Prototyping

Printed Tubing

June 5, 2013 4:54 pm | Extrusion Alternatives, Inc. | Products

Printed Tubing

LISTED UNDER: Extrusion | Product R&D | Prototyping

IV Sets

June 5, 2013 4:49 pm | Extrusion Alternatives, Inc. | Products

IV Sets

LISTED UNDER: Extrusion | Product R&D | Prototyping

Guidewire

June 5, 2013 4:44 pm | Extrusion Alternatives, Inc. | Products

Guidewires

LISTED UNDER: Extrusion | Product R&D | Prototyping

Needle & Sharps Guards

June 5, 2013 4:38 pm | Extrusion Alternatives, Inc. | Products

Needle & Sharps Guards

LISTED UNDER: Extrusion | Product R&D | Prototyping
Advertisement

GW/CM - GW Plastics Contract Manufacturing

June 3, 2013 4:04 pm | GW Silicones | Products

The world's market-leading companies turn to GW Plastics as a natural extension to their own production capabilities to injection mold and assemble their products. In addition to our precision plastic injection molding and tooling expertise, we provide turnkey contract assembly support with a lean manufacturing approach. We support a full range of secondary processes including automated and manual assembly, testing, decoration, packaging and fulfillment services in the United States with lower cost alternatives in China, Costa Rica and Mexico. Coupled with industry leading lean manufacturing innovation and a dedication to the rigorous disciplines of quality assurance, GW Plastics is a full service partner.

LISTED UNDER: Cleanroom Assembly | Custom Assembly | Full Service Contract Manufacturing

GW/PD - GW Plastics Product Development

June 3, 2013 3:58 pm | GW Silicones | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

GW/PD - GW Plastics Product Development

June 3, 2013 2:25 pm | GW Plastics, Inc. | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

Engineering Services

April 30, 2013 1:18 pm | Specialty Silicone Fabricators | Products

SSF’s engineering resources support production and engineering services. For production projects our engineering staff is intimately involved in process design, process development, material selection and validation. Our engineering staff has years of experience and familiarity with the processes ensuring that you receive both high value and consistent high quality output. If you are in the early phases of product realization or in the early stages of the Design Control process then Engineering Services is an option where SSF can provide valuable assistance in: Product design ● Design for manufacturability ● Feasibility testing ● Design confirmation testing ● Rapid prototype builds ● Material testing ● Performance testing.

LISTED UNDER: Design Services | Product Design | Product R&D

Contract Manufacturing

April 26, 2013 3:16 pm | Specialty Silicone Fabricators | Products

SSF can support all stages of manufacturing operations: from manual assembly to fully automated device and product manufacturing. We employ highly skilled operators and offer high precision manual manufacturing operations. SSF follows Lean Methods providing you with continual improvement in cost and yield. SSF can help in all aspects of your product development and production. In our manufacturing process we provide traceability of all components and materials. We have microbial control monitoring including product bioburden, pyrogen testing monitoring capabilities. We manufacture in an ISO Class 7 (Class 10,000) clean rooms, ISO Class 8 (Class 100,000) clean rooms and clean rooms.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

AdvantageRF Development Platform

January 2, 2013 1:59 pm | RBC Medical Innovations | Products

RBC Medical Innovations is the distributor of choice for the revolutionary AdvantageRF™ Development Platform, a medical Radio Frequency Generator (RFG) that’s flexible, powerful and easy to use, with energy profiles and parameters that are fully customizable at the touch of a button! So whether your new device will be used for ablation, cutting, coagulation, cauterization or other procedures or treatments, AdvantageRF helps you immediately begin development of your delivery devices and custom energy delivery profiles. Commercialization that used to take years can now be realized in months!

LISTED UNDER: Product R&D | Prototyping | Rapid Prototyping

Triton Alloy

November 21, 2012 11:03 am | NeoMetrics, Inc. | Products

The Triton alloy is a new proprietary (patent pending) alloy developed by NeoMetrics. The Triton alloy is a “next generation” form of nitinol and retains the superelastic properties of nitinol but has a 40% higher bending modulus than nitinol. According to bench testing, when compared to traditional nitinol this should result in: - Superior support profile for delivering interventional devices - Better column strength for excellent pushability to reach target treatment areas - Superior torqueability for steerability in challenging cases

LISTED UNDER: Full Service Contract Manufacturing | Product R&D | Metals

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading