Advertisement

GW/PD - GW Plastics Product Development

June 3, 2013 3:58 pm | GW Silicones | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

GW/PD - GW Plastics Product Development

June 3, 2013 2:25 pm | GW Plastics, Inc. | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

Engineering Services

April 30, 2013 1:18 pm | Specialty Silicone Fabricators | Products

SSF’s engineering resources support production and engineering services. For production projects our engineering staff is intimately involved in process design, process development, material selection and validation. Our engineering staff has years of experience and familiarity with the processes ensuring that you receive both high value and consistent high quality output. If you are in the early phases of product realization or in the early stages of the Design Control process then Engineering Services is an option where SSF can provide valuable assistance in: Product design ● Design for manufacturability ● Feasibility testing ● Design confirmation testing ● Rapid prototype builds ● Material testing ● Performance testing.

LISTED UNDER: Design Services | Product Design | Product R&D
Advertisement

Contract Manufacturing

April 26, 2013 3:16 pm | Specialty Silicone Fabricators | Products

SSF can support all stages of manufacturing operations: from manual assembly to fully automated device and product manufacturing. We employ highly skilled operators and offer high precision manual manufacturing operations. SSF follows Lean Methods providing you with continual improvement in cost and yield. SSF can help in all aspects of your product development and production. In our manufacturing process we provide traceability of all components and materials. We have microbial control monitoring including product bioburden, pyrogen testing monitoring capabilities. We manufacture in an ISO Class 7 (Class 10,000) clean rooms, ISO Class 8 (Class 100,000) clean rooms and clean rooms.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

AdvantageRF Development Platform

January 2, 2013 1:59 pm | RBC Medical Innovations | Products

RBC Medical Innovations is the distributor of choice for the revolutionary AdvantageRF™ Development Platform, a medical Radio Frequency Generator (RFG) that’s flexible, powerful and easy to use, with energy profiles and parameters that are fully customizable at the touch of a button! So whether your new device will be used for ablation, cutting, coagulation, cauterization or other procedures or treatments, AdvantageRF helps you immediately begin development of your delivery devices and custom energy delivery profiles. Commercialization that used to take years can now be realized in months!

LISTED UNDER: Product R&D | Prototyping | Rapid Prototyping

Triton Alloy

November 21, 2012 11:03 am | NeoMetrics, Inc. | Products

The Triton alloy is a new proprietary (patent pending) alloy developed by NeoMetrics. The Triton alloy is a “next generation” form of nitinol and retains the superelastic properties of nitinol but has a 40% higher bending modulus than nitinol. According to bench testing, when compared to traditional nitinol this should result in: - Superior support profile for delivering interventional devices - Better column strength for excellent pushability to reach target treatment areas - Superior torqueability for steerability in challenging cases

LISTED UNDER: Full Service Contract Manufacturing | Product R&D | Metals

ExtruMed Offers Balloon Expansion Capabilities

February 18, 2010 7:44 am | Product Releases | Comments

ExtruMed, the thermoplastics division of medical device contract manufacturer Vesta Inc., has launched balloon expansion capabilities within its Livermore, CA plant.

LISTED UNDER: Angioplasty Balloons | Medical Device Testing | Product R&D

Small Core Mid-IR Fiber Enables High Power Handling Over Smaller Bend Radius

February 5, 2010 10:55 am | Product Releases | Comments

IRphotonics (MD&M West Booth 568), a leading provider of advanced infrared fiber and materials, offers its new small core High Power Multimode mid infrared fiber (H100) targeting medical, industrial, and R&D applications. The H100 mid-IR fiber offers a spectral transmission from 0.3 to 4.

LISTED UNDER: Fiber Optics | Product R&D
Advertisement

Instrument Design Resource for Engineers/Equipment Manufacturers

January 22, 2010 10:58 am | Product Releases | Comments

Available free to instrument manufacturers and design engineers, The Instrument Design Resource is

LISTED UNDER: Product Design | Product R&D

Force Sensor Manufacturer Wins “Best of Tradeshow”

October 21, 2009 5:32 am | Tekscan, Inc. | Product Releases | Comments

Bestoftradeshow.com has recognized Tekscan Inc. (Booth 1137), a provider of force and pressure sensors for product design, quality control, R&D, and/or testing, with the Best of MDM Minneapolis award.

LISTED UNDER: Pressure | Medical Device Testing | Transducers

Search Technology Increases Corporate R & D Productivity

August 5, 2009 10:44 am | Product Releases | Comments

illumin8 is a web-based semantic text-mining solution designed to help corporate research professionals answer complex R&D questions with greater speed and effectiveness. For end-users, illumin8 is now even "smarter" in that users do not need to remember arcane search parameters or syntax.

LISTED UNDER: Product R&D | Product R&D

Medical Adhesives Selector Guide

April 2, 2009 5:33 am | Product Releases | Comments

Dymax Corp. offers an enhanced version of their comprehensive Selector Guide on MD Adhesives for Medical Device Assembly. This guide is a valuable tool containing a number of charts intended to help R&D engineers and product designers choose the appropriate adhesive for their application.

LISTED UNDER: UV-or Light-Cure | Product Design | Product R&D

Programmable Force Tester Features PC Control

October 13, 2008 12:07 pm | Product Releases | Comments

The Model ESM301 force tester is designed for product integrity testing in quality control, manufacturing, and R&D areas. With a load capacity of 300 lbf (1.

LISTED UNDER: Product-Safety/Performance Testing | Product R&D

Non-Magnetic Interconnect Product Line Released

August 29, 2008 4:58 am | Smiths Connectors | Hypertac | Product Releases | Comments

The product features contact kits and cable assemblies, to be used in the medical imaging industry.

LISTED UNDER: Connectors | Cable Assemblies | Product R&D

Custom Coil Cords Provide Reliability

March 11, 2008 10:05 am | Product Releases | Comments

Custom coil cords are manufactured exclusively in the U.S. using the company’s lot size of one and Six Sigma manufacturing process, which equates to excellent turn-around times and near-zero defects.

LISTED UNDER: Cordsets/Power Cords | Product R&D

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading