Advertisement

FlexiForce Quickstart Board

December 3, 2013 11:31 am | Tekscan, Inc. | Products

The FlexiForce Quickstart Board is a finished single voltage source circuit designed for OEMs to quickly drop into a prototype, or design into a product to obtain force measurements. Starting at just $150, the Quickstart Board is compatible with all of Tekscan’s off-the-shelf pinned FlexiForce sensors (sold separately). For a limited time, two free sample FlexiForce sensors are included with purchase. Purchase a Quickstart Board today and see how easy it is to integrated FlexiForce sensors into your OEM application.

LISTED UNDER: Product Design | Prototyping | Flexible Circuits

FlexiForce HT201 High-Temperature Sensor

December 3, 2013 11:25 am | Tekscan, Inc. | Products

HT201 is a high-temperature force sensor with a sensing area of 9.53 mm (0.375 in.)diameter. This sensor is available in force ranges of HT201- Low: 0 - 30 lb (0-133 N) HT201- High: 0 - 140 lb (0-445 N) Can perform in temperatures up to 400°F.

LISTED UNDER: Product Design | Product R&D | Prototyping

FlexiForce A401 Sensor

December 3, 2013 11:21 am | Tekscan, Inc. | Products

The FlexiForce A401 sensor has a sensing area of 25.4 mm (91 in.)diameter. This sensor is available in a force range of 0-25 lb.(111 N)

LISTED UNDER: Product Design | Prototyping | Thin-film
Advertisement

FlexiForce A301 Sensor

December 3, 2013 11:17 am | Tekscan, Inc. | Products

The FlexiForce A301 sensor is 1” in length and has a sensing area of .375”. Smaller than the traditional FlexiForce A201 sensor, the A301 is popular among design engineers who are prototyping for OEM applications, which often requires a smaller sensor. These A301 sensors are available in 4-packs/8-packs and in high quantities.

LISTED UNDER: Product Design | Prototyping | Thin-film

FlexiForce A201 Sensor

December 3, 2013 10:28 am | Tekscan, Inc. | Products

FlexiForce standard force sensor: 191 mm (7.5 in.) in length and a sensing area of 9.53 mm (0.375 in.) diameter. This thin, flexible force sensor is easy to integrate into products and applications. The sensors are trimmable and available in various force ranges: 0 - 1 lb. (4.4 N) 0 - 25 lb. (111 N) 0 - 100 lb. (445 N)

LISTED UNDER: Product Design | Prototyping | Measurement Instruments

Laser Machine Exhibits Versatility for Precise Cutting and Welding

November 14, 2013 4:22 pm | by MDT Staff | Trumpf Inc. | Product Releases | Comments

TRUMPF will feature the TruLaser Cell 3000, a 5-axis laser machine for fine cutting and precision welding, on display for the first time in North America in booth S1701 at FABTECH. The event will take place at McCormick Place in Chicago, IL, November 18-21, 2013.

LISTED UNDER: Laser Welding

High Quality Structured Blue Light 3D Scanners

October 31, 2013 4:25 pm | by MDT Staff | Product Releases | Comments

The ATOS Core series is the newest addition to the ATOS product line of advanced 3D scanners engineered by GOM mbH Germany. With GOM's industry benchmarked reputation for designing and manufacturing accurate, high quality and innovative optical metrology systems, the ATOS Core is truly a mini sized powerhouse setting a new price/performance milestone in the marketplace.

LISTED UNDER: Product Design | Rapid Prototyping

Laser Material Weldability Tool

September 11, 2013 3:28 pm | by MDT Staff | Miyachi Unitek Corp. | Product Releases | Comments

Miyachi Unitek has unveiled a new automated Laser Material Weldability App on its website, which gives users quick answers on material weldability using laser spot or seam welding.

LISTED UNDER: Laser Welding | Welding
Advertisement

Disposable Eye Patches

August 27, 2013 10:29 am | ATL (Ad Tape & Label) | Products

These simple and inexpensive disposable eye patches are used for monocular acuity testing by doctors, screeners, and parents. The 3M Micropore tape has a non-adhesive pad island placed on the tape to avoid contact with the eye and eyelashes. They are comfortable to wear and easy to use and remove. These patches can be purchased in the generic yellow and blue designs or you can customize your own patch. Please contact Mike O'Connell at moconnell@atlco.com for more information or samples.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Contract Packaging

Disposable die cut components

August 22, 2013 3:41 pm | ATL (Ad Tape & Label) | Products

ATL offers custom rotary die cutting and packaging of medical tapes and foams for tight tolerance applications. An experienced engineering staff can assist you with material selection, product design, and flat bed die cut prototypes. Island placement capabilities are also available.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Laminating

Direct-to-Slide Printer Now Offers High-Performance Ink Ribbons

August 14, 2013 5:11 pm | by MDT Staff | Primera Technology, Inc. | Product Releases | Comments

Specimen misidentification on slides can be a major risk in lab operations due to the difficulty of reading handwritten patient data or the use of difficult-to-apply xylene-resistant labels. That’s why direct-to-slide printers such as Primera’s Signature Slide Printer have recently become popular in laboratories all over the world.

LISTED UNDER: Printing

Third Generation Six-Axis System for Processing Device Components

August 13, 2013 11:34 am | by MDT Staff | Product Releases | Comments

Prima Power Laserdyne has announced the introduction of its new Laserdyne 430 series of systems. The new series’ precision allows parts to be rapidly machined with tight tolerances, making it perfectly suited for use when manufacturing medical, surgical, and dental device components.

LISTED UNDER: Laser Machining | Laser Welding

CNC Milling - 5 Axis Precision Medical Component Machining

August 8, 2013 3:13 pm | Criterion Instrument | Products

CNC Milling - 5 Axis Precision Component Machining.

LISTED UNDER: CNC Machining | Electrical Discharge Machining | Machining

CNC Turning - Precision Machining for the Orthopedic Industry

August 8, 2013 2:09 pm | Criterion Instrument | Products

CNC Turning - Precision machined parts for the Orthopedic Industry.

LISTED UNDER: CNC Machining | Electrical Discharge Machining | Machining

Swiss Turning - Precision Medical Machining Services

August 7, 2013 11:58 am | Criterion Instrument | Products

Swiss Turning - Precision Medical Machining Services

LISTED UNDER: CNC Machining | Electrical Discharge Machining | Machining

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading