Advertisement

Extrusion Mandrel Features Biocompatible PTFE Coating

September 14, 2011 5:52 am | Applied Plastics Co., Inc. | Product Releases | Comments

An extrusion mandrel for manufacturing and forming catheter tubing that provides a smooth, slippery surface to permit faster production is available from Applied Plastics Co., Inc.

LISTED UNDER: Extrusion | Extrusion Equipment | Biocompatible

Magnetic Reed Switches and Custom Transformers

September 8, 2011 6:23 am | Standex Electronics | Product Releases | Comments

Standex Electronics will features a full range of magnetic reed switches – including the world’s smallest – along with custom transformers, planar transformers, and other custom electronic components...

LISTED UNDER: Transformers/Converters/Conditioners | Magnets/Magnetic Devices | Magnets/Magnetic Devices

Production of Custom Catheter Tips

August 24, 2011 6:54 am | Medical Murray, Inc. | Product Releases | Comments

Medical Murray, a medical device development and contract manufacturing company, with ISO13485 certification and FDA registration, provides clients with custom catheter tips for all their complex catheter requirements.

LISTED UNDER: Micro Molding | Insert Micro Molding | Full Service Contract Manufacturing
Advertisement

Bondable LSR Overmolding Capability Demonstrated With a Free Widget

August 22, 2011 5:55 am | Product Releases | Comments

Rogan Corporation, a leading molder of plastic components for more than seventy-five years, is featuring its Bondable Liquid Silicone Rubber capability in a Free “WIDGET”...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Rubber Component Prototyping Service

August 1, 2011 5:57 am | Product Releases | Comments

Robinson Rubber Products, a designer, developer and manufacturer of custom-molded rubber products, extruded rubber products, and precision rollers, has a new prototyping service.

LISTED UNDER: Prototyping | Rubber | Prototyping

PEAK Material Available for Rapid Prototyping

July 18, 2011 5:34 am | Quickparts | Product Releases | Comments

3D Systems (NYSE: DDD) announced that Quickparts is now offering the Accura PEAK stereolithography material for rapid prototyping.

LISTED UNDER: Prototyping | Prototyping | Rapid Prototyping

Brass Prototype Parts for Medical Designers

July 15, 2011 6:31 am | Proto Labs, Inc. | Product Releases | Comments

Europe’s medical designers can order short-run prototype parts in brass from Firstcut, a ground-breaking service provided by Proto Labs, the world’s fastest source for rapid injection molded and CNC custom machined parts.

LISTED UNDER: CNC Machining | Component Testing | CAD

Voice Coil Actuator Solves Challenging Application Requirements for High Temperature Capabilities

June 24, 2011 6:34 am | Product Releases | Comments

BEI Kimco Magnetics, a company of Custom Sensors & Technologies (CST), Inc., recently met the challenging voice coil actuator requirements for a high temperature spectrometer application.

LISTED UNDER: Actuators | Actuators | Actuators
Advertisement

Interconnect Clip Firmly Secures Circuit-to-Board Connections

June 22, 2011 5:43 am | Product Releases | Comments

Molex Incorporated recently released the ClipLok™ interconnect clip, an electomechanical connection that easily attaches to secure a membrane switch or FPC tail firmly to a printed circuit board

LISTED UNDER: Component Testing | Product Design

Molding Services for Medical Device Components

June 15, 2011 7:07 am | Product Releases | Comments

The B. Braun OEM Division of B. Braun Medical Inc. offers injection molding, insert molding and over molding for the production and customization of medical device components.

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Manufacturer of Complicated Components and Assemblies for Medical Devices

June 3, 2011 10:08 am | Stellar Technologies | Product Releases | Comments

Stellar Technologies has been a partner to medical companies for over 15 years and specializes in manufacturing complicated components and assemblies of the highest quality.

LISTED UNDER: Cleanroom Assembly | Micro Molding | Micromachining

Needle Hub Components

June 2, 2011 12:43 pm | Qosina | Product Releases | Comments

Qosina needle hub components are a three part combination: hub connector, bushing and cap creating customized fluid delivery or withdrawal system.

LISTED UNDER: Cannulae/Needles/Trocars | Prototyping

Medical Injection Molder and Contract Manufacturer

June 2, 2011 11:35 am | C&J Industries, Inc. | Product Releases | Comments

C&J Industries is an ISO 13485:2003 and ISO 9001:2008 certified medical injection molder and FDA registered medical device contract manufacturer.

LISTED UNDER: Injection Molding | Product Design

Custom Injection Molding, Dip Molding and Extrusion

June 2, 2011 11:32 am | Caplugs | Product Releases | Comments

Caplugs’ medical molding capabilities include custom injection molding, dip molding and Extrusion of a wide range of medical & FDA grade materials.

LISTED UNDER: Molding | Extrusion Equipment | Molding Equipment

RF Welding Creates Alternative for Fabricating Medical Fluid Bags

June 1, 2011 7:01 am | Product Releases | Comments

An innovation in radio frequency (RF) plastics welding now enables manufacturers of medical bags and pouches to obtain the clarity, elasticity, and performance advantages of Medalist medical elastomers...

LISTED UNDER: Laser Welding | RF Welding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading